Characterization of Electromagnetic Force of the Transformer During the Occurrence of a Ferroresonance Phenomenon by FEM
الموضوعات : مهندسی هوشمند برقIman Rostami 1 , ahmad zare 2 , alireza shams 3 , saeid saberi firoozi 4
1 - Department of Electrical Engineering, islamic azad University, marvdasht, Iran
2 - Department of Electrical Engineering, islamic azad University, marvdasht, Iran
3 - Department of Electrical Engineering, Azarbaijan Shahid Madani University, Tabriz, Iran
4 - 3Department of Electrical Engineering, Azarbaijan Shahid Madani University, Tabriz, Iran
الکلمات المفتاحية: Finite element method (FEM), Ferroresonance phenomenon, Electromagnetic force, Distribution transformers,
ملخص المقالة :
Ferroresonance is a non-linear resonance which occurs between the capacitors of the cables, lines, and breakers and nonlinear inductance of the reactors and transformers when their core is saturated. Due to ferroresonance, it has been proved that large pulse currents pass through the transformer winding which seems to cause severe electromagnetic forces on the transformer windings. This research work is aimed at characterizing the transformer behavior at ferroresonance mode and calculation of the electromagnetic forces applied on the windings. To this end, a 2D FEM model of a 25KVA distribution transformer is developed. The accuracy of the FEM model is validated by comparing the FEM results and those obtained from the analytical methods. The results of this study are of great importance in the electrical and mechanical design of transformers and their windings. . . . . . . . . . . . . . . . . . . . . . . .
