Analysis of Steady-State Brillouin Nonlinearity in High-Power Fiber Lasers
الموضوعات : فصلنامه نانوساختارهای اپتوالکترونیکی
Maryam Ilchi-Ghazaani
1
(Photonics and Quantum Technologies Research School, Nuclear Science and Technology Research Institute (NSTRI))
الکلمات المفتاحية: Efficiency, Nonlinear Effect, Double-Clad Fibers, Stimulated Brillouin Scattering, Threshold Power, Unidirectional Pumping Mode,
ملخص المقالة :
In the present work, a theoretical analysis of the first-order of stimulated
Brillouin scattering (SBS) in a double-clad (DC) ytterbium (Yb)-doped silica fiber laser
in unidirectional pumping mode is presented.
An accurate simulation for calculating SBS nonlinearity is performed by considering the
coupled differential rate equations for pump, signal and Stokes powers, as well as
population inversion under the initial and boundary conditions in a typical all fiberbased
laser with kW-range.
In order to improve the laser operation and increase the laser efficiency, the dependence
of different parameters of the laser cavity such as active fiber length, fiber core
diameter, dopant concentration, output mirror reflectivity at signal wavelength, as well
as the laser linewidth on the Brillouin threshold power has been studied.
In addition, numerical analysis has been compared with the approximate analytical
solution presented to emphasize the validity of modeling.
As a result, the proposed laser design can generate up to 2.5 kW of output power
without the onset of SBS.
[1] Y. Wang, "Dynamics of stimulated Raman scattering in double-clad fiber pulse amplifiers," Quantum Electronics, IEEE Journal of, vol. 41, pp. 779-788, 2005.
[2] I. D. Vatnik, D. V. Churkin, S. A. Babin, and S. K. Turitsyn, "Cascaded random distributed feedback Raman fiber laser operating at 1.2 μm," Optics express, vol. 19, pp. 18486-18494, 2011.
[3] C.-J. Chen, H. K. Lee, and Y.-J. Cheng, "Instability in Raman amplifiers caused by distributed Rayleigh reflection," in Optical Fiber Communication Conference, 2003, p. TuC2.
[4] O. Frazão, C. Correia, J. Santos, and J. Baptista, "Raman fibre Bragg-grating laser sensor with cooperative Rayleigh scattering for strain–temperature measurement," Measurement Science and Technology, vol. 20, p. 045203, 2009.
[5] G. Liu and D. Liu, "Numerical analysis of stimulated Brillouin scattering in high-power double-clad fiber lasers," Optik-International Journal for Light and Electron Optics, vol. 120, pp. 24-28, 2009.
[6] M. Hekmat, M. Dashtabi, S. Manavi, E. Hassanpour, and R. Massudi, "Study of the stimulated Brillouin scattering power threshold in high power double-clad fiber lasers," Laser Physics, vol. 23, p. 025104, 2013.
14 * Journal of Optoelectronical Nanostructures Summer 2020 / Vol. 5, No. 3
[7] Y. Wang, C.-Q. Xu, and H. Po, "Analysis of Raman and thermal effects in kilowatt fiber lasers," Optics communications, vol. 242, pp. 487-502, 2004.
[8] T. Sakamoto, T. Matsui, K. Shiraki, and T. Kurashima, "SBS suppressed fiber with hole-assisted structure," Journal of Lightwave Technology, vol. 27, pp. 4401-4406, 2009.
[9] J. Leng, X. Wang, H. Xiao, P. Zhou, Y. Ma, S. Guo, et al., "Suppressing the stimulated Brillouin scattering in high power fiber amplifiers by dual-single-frequency amplification," Laser Physics Letters, vol. 9, p. 532, 2012.
[10] A. Liu, "Novel SBS suppression scheme for high power fiber amplifiers," in Fiber Lasers III: Technology, Systems, and Applications, 2006, p. 61021R.
[11] A. Yeniay, J.-M. Delavaux, and J. Toulouse, "Spontaneous and stimulated Brillouin scattering gain spectra in optical fibers," Journal of lightwave technology, vol. 20, p. 1425, 2002.
[12] D. Machewirth, V. Khitrov, U. Manyam, K. Tankala, A. Carter, J. Abramczyk, et al., "Large-mode-area double-clad fibers for pulsed and CW lasers and amplifiers," in Fiber Lasers: Technology, Systems, and Applications, 2004, pp. 140-150.
[13] H. Al-Asadi, M. Al-Mansoori, M. Ajiya, S. Hitam, M. Saripan, and M. Mahdi, "Effects of pump recycling technique on stimulated Brillouin scattering threshold: A theoretical model," Optics express, vol. 18, pp. 22339-22347, 2010.
[14] H. A. Alasadi, M. Al-Mansoori, M. Saripan, and M. Mahdi, "Brillouin linewidth characterization in single mode large effective area fiber through co-pumped technique," International Journal of Electronics, Computer and Communications Technologies, vol. 1, pp. 16-20, 2010.
[15] M. Hildebrandt, S. Buesche, P. Weβels, M. Frede, and D. Kracht, "Brillouin scattering spectra in high-power single-frequency ytterbium doped fiber amplifiers," Optics express, vol. 16, pp. 15970-15979, 2008.
[16] B. Stiller, M. Delqué, M. W. Lee, S. F. Mafang, J.-C. Beugnot, A. Kudlinski, et al., "Effect of inhomogeneities on backward and forward Brillouin scattering in photonic crystal fibers," in SPIE Photonics Europe, 2010, pp. 771406-771406-12.
[17] N. A. Brilliant, "Stimulated Brillouin scattering in a dual-clad fiber amplifier," JOSA B, vol. 19, pp. 2551-2557, 2002.
Analysis of Steady-State Brillouin Nonlinearity in High-Power Fiber Lasers * 15
[18] V. I. Kovalev and R. G. Harrison, "Waveguide-induced inhomogeneous spectral broadening of stimulated Brillouin scattering in optical fiber," Optics letters, vol. 27, pp. 2022-2024, 2002.
[19] T. Shimizu, K. Nakajima, K. Shiraki, K. Ieda, and I. Sankawa, "Evaluation methods and requirements for the stimulated Brillouin scattering threshold in a single-mode fiber," Optical Fiber Technology, vol. 14, pp. 10-15, 2008.
[20] Y. Aoki, K. Tajima, and I. Mito, "Input power limits of single-mode optical fibers due to stimulated Brillouin scattering in optical communication systems," Lightwave Technology, Journal of, vol. 6, pp. 710-719, 1988.
[21] J. Zhu, P. Zhou, Y. Ma, X. Xu, and Z. Liu, "Power scaling analysis of tandem-pumped Yb-doped fiber lasers and amplifiers," Optics express, vol. 19, pp. 18645-18654, 2011.
[22] M. Ilchi-Ghazaani and P. Parvin, "Distributed scheme versus MOFPA array on the power scaling of a monolithic fiber laser," IEEE Journal of quantum electronics, vol. 50, pp. 698-708, 2014.
[23] H. Yang, K. Duan, B. Zhao, and E. Zhang, "Theoretical study of stimulated Brillouin scattering in high-power dual-clad fiber lasers," Optik-International Journal for Light and Electron Optics, vol. 124, pp. 1049-1052, 2013.
[24] L. Xiao, P. Yan, M. Gong, W. Wei, and P. Ou, "An approximate analytic solution of strongly pumped Yb-doped double-clad fiber lasers without neglecting the scattering loss," Optics communications, vol. 230, pp. 401-410, 2004.
[25] Z. Zhang and H. Gong, "Amplification effect on SBS and Rayleigh scattering in the backward pumped distributed fiber Raman amplifier," Chinese Optics Letters, vol. 7, pp. 393-395, 2009.
[26] S. Mohammadian, P. Parvin, M. Ilchi-Ghazaani, R. Poozesh, and K. Hejaz, "Measurement of gain and saturation parameters of a single-mode Yb: silica fiber amplifier," Optical Fiber Technology, vol. 19, pp. 446-455, 2013.
