مقایسۀ عملکرد انواع سایبان ثابت در جهت کنترل نور روز ساختمان (مطالعه موردی: جبهۀ جنوبی در اقلیم یزد)
الموضوعات :
طاهره نصر
1
(دانشیار، گروه معماری، دانشکده هنر و معماری، واحد شیراز، دانشگاه آزاد اسلامی، شیراز، ایران. *( مسوول مکاتبات))
زهرا یارمحمودی
2
(دکترای معماری، گروه معماری، دانشکده هنر و معماری، واحد شیراز، دانشگاه آزاد اسلامی، شیراز، ایران.)
تاريخ الإرسال : 09 السبت , ذو القعدة, 1442
تاريخ التأكيد : 20 الثلاثاء , ربيع الأول, 1443
تاريخ الإصدار : 24 السبت , ذو الحجة, 1443
الکلمات المفتاحية:
سایبان‌های خارجی ثابت,
اقلیم یزد,
انرژی تابشی,
گونه‌شناسی,
کنترل نور روز,
ملخص المقالة :
زمینه و هدف: معماری سنتی ایران دارای سبک بوم‌آورد است؛ اما با گذشت زمان و پیشرفت تکنولوژی، طراحی منطبق با محیط کم‌رنگ شده و به دنبال آن مصرف انرژی افزایش یافته است. یکی از راه‌حل‌های این مشکل، طراحی صحیح نمای ساختمان است. زیرا نما مانند پوست انسان، ارتباط دهنده‌ی فضای درون و بیرون است. به همین دلیل می‌توان با کنترل ورود نور خورشید به فضای داخلی در اقلیم گرم و خشک و فصول گرم سال باعث کاهش دمای ساختمان شد. براین‌اساس، هدف پژوهش حاضر شناسایی انواع سایبان ثابت توسط اسناد کتابخانه‌ای و اینترنتی است. روش بررسی: ماهیت تحقیق حاضر ترکیبی و روش پژوهش شبیه‌سازی مدل‌سازی است. سایبان‌ها در نرم‌افزار راینو و افزونه گرس‌هاپر مدل شده و پس از آن شهر یزد که دارای اقلیم گرم و خشک است، جهت تحلیل میزان انرژی تابشی جذب شده توسط سطح شفاف نمای جنوبی ساختمان در تاریخ 15 تیرماه، توسط افزونه‌لیدی‌باگ در محیط گرس‌هاپر برای رسیدن به گونه مناسب سایبان ثابت در اقلیم گرم و خشک و کنترل نور روز، انتخاب و تحلیل‌های نور روز و حرارتی در نرم‌افزار اکوتکت انجام شده است.یافته ها: یافته‌ها حاکی از آن است که به ترتیب سایبان هندسی و افقی بهترین عملکرد در راستای کنترل ورود نور خورشید در اقلیم گرم و خشک و فصول گرم سال داشته است. بحث و نتیجه گیری: بنابراین به دلیل شباهت زیاد سایبان هندسی به سایبان‌های موجود در معماری سنتی ایران، می‌توان نتیجه گرفت که نوآوری شایسته با حفظ اصول و پرهیز از تقلید کورکورانه از گذشته می‌تواند راهکارهای مطلوب و اقتصادی برای مشکلات موجود در عصر حاضر باشد.
المصادر:
N. Noroozian, “Localization pattern for assessment of energy efficiency in buildings in Tehran,” Naqshejahan-Basic Stud. New Technol. Archit. Plan., vol. 6, no. 3, pp. 63–74, 2016. (In Persion)
T. Nasr, Z. Yarmahmoodi, and S. M. Ahmadi, “The Effect of Kinetic Shell’s Geometry on Energy Efficiency Optimization Inspired by Kinetic Algorithm of Mimosa pudic,” Naqshejahan-Basic Stud. New Technol. Archit. Plan., vol. 10, no. 3, pp. 219–230, 2020. (In Persion)
Shokoufeh Avazalipour Haqiqatparast, Y. Taghizadeh, and H. Zabihi, “Designing a native pattern in arid climate to reduce energy consumption in housing sector (Case study: Yazd),” J. Environ. Sci. Technol., vol. 21, no. 3, pp. 227–236, 1970, doi: 10.22034/jest.2019.14554. (In Persion)
A. Sharghi and A. Ghanbaran, “Inspiration of Nature in Training of Architecture,” J. Environ. Sci. Technol., vol. 14, no. 3, pp. 107–118, 2012, [Online]. Available: https://jest.srbiau.ac.ir/article_1708.html. (In Persion)
S. Samadi, E. Noorzai, L. O. Beltrán, and S. Abbasi, “A computational approach for achieving optimum daylight inside buildings through automated kinetic shading systems,” Front. Archit. Res., vol. 9, no. 2, pp. 335–349, 2020.
H. Sghiouri, M. Charai, A. Mezrhab, and M. Karkri, “Comparison of passive cooling techniques in reducing overheating of clay-straw building in semi-arid climate,” in Building Simulation, 2020, vol. 13, no. 1, pp. 65–88.
M. Rasuli, Y. Shahbazi, and M. Matini, “Horizontal and Vertical Movable Drop-Down Shades Performance in Double Skin Facade of Office Buildings; Evaluation and Parametric Simulation,” Naqshejahan-Basic Stud. New Technol. Archit. Plan., vol. 9, no. 2, pp. 135–144, 2019. (In Persion)
X. Shi, T. Abel, and L. Wang, “Influence of two motion types on solar transmittance and daylight performance of dynamic façades,” Sol. Energy, vol. 201, pp. 561–580, 2020.
M. Haghshenas, M. R. Bemanian, and Z. Ghiabaklou, “Analysis the Criteria of Solar Trasmittance from Stained Glasses Used in Some of the Orosis from Safavid Dynasty,” J. Color Sci. Technol., vol. 10, no. 1, pp. 55–64, 2016, [Online]. Available: http://jcst.icrc.ac.ir/article_76183.html.
M. Haghshenas and Z. Ghiabaklou, “Investigation of tinted glazing’s effect in transmission of daylight and energy in the visible spectrum,” J. Color Sci. Technol., vol. 2, no. 4, p. 213û220, 2009.
A. Mohammadi and S. M. H. Ayatollahi, “Designing a Model Shading Device for Booshehr City,” Soffeh, vol. 21, no. 3, pp. 45–56, 2012, [Online]. Available: https://soffeh.sbu.ac.ir/article_100364.html. (In Persion)
M. A. Fadaii Ardestani, H. Nasseri Mobaaraki, M. R. Ayatollahi, and Z. S. Zomorrodian, “The Assessment of Daylight and Glare in Classrooms Using Dynamic Indicators; the Case of SBU Faculty of Architecture and Urban Planning,” Soffeh, vol. 28, no. 4, pp. 25–40, 2018, [Online]. Available: https://soffeh.sbu.ac.ir/article_100759.html. (In Persion)
M. Asghari, Z. Poolaei, and H. Yazdani, “Evaluation of Window overhang and External wall thermal Conductivity reduction Effect On office Cooling load in 3 Climates Hot and Humidity, Mild and Cold,” J. Mech. Eng., vol. 48, no. 4, pp. 331–335, 2019, [Online]. Available: https://tumechj.tabrizu.ac.ir/article_8430.html.
A. Heidari, M. Taghipour, and Z. Yarmahmoodi, “The Effect of Fixed External Shading Devices on Daylighting and Thermal Comfort in Residential Building,” J. Daylighting, vol. 8, no. 2, pp. 165–180, 2021.
A. Fathalian and H. Kargarsharif, “Investigating the Effect of Different Energy Saving Strategies on Energy Rating of Building by Design Builder Software (Case Study: Office Building),” J. Environ. Sci. Technol., vol. 22, no. 7, pp. 199–214, 2020, doi: 10.22034/jest.2019.42973.4590. (In Persion)
L. G. Valladares-Rendón and S.-L. Lo, “Passive shading strategies to reduce outdoor insolation and indoor cooling loads by using overhang devices on a building,” in Building Simulation, 2014, vol. 7, no. 6, pp. 671–681.
A. Aldawoud, “Conventional fixed shading devices in comparison to an electrochromic glazing system in hot, dry climate,” Energy Build., vol. 59, pp. 104–110, 2013.
P. M. Esquivias, C. M. Munoz, I. Acosta, D. Moreno, and J. Navarro, “Climate-based daylight analysis of fixed shading devices in an open-plan office,” Light. Res. Technol., vol. 48, no. 2, pp. 205–220, 2016.
L. G. Valladares-Rendón, G. Schmid, and S.-L. Lo, “Review on energy savings by solar control techniques and optimal building orientation for the strategic placement of façade shading systems,” Energy Build., vol. 140, pp. 458–479, 2017.
G. Kim, H. S. Lim, T. S. Lim, L. Schaefer, and J. T. Kim, “Comparative advantage of an exterior shading device in thermal performance for residential buildings,” Energy Build., vol. 46, pp. 105–111, 2012.
F. D. Miran and H. K. Abdullah, “Evaluation of the Optimal Solar Shading Devices for Enhancing Daylight Performance of School Building (A case study semi-arid Clim. city),” ZANCO J. Pure Appl. Sci, vol. 28, pp. 580–598, 2016.
F. Zare and S. Heidari, “Architectural Design Based on Daylight Utilization- An Approach for Library Design in Tehran,” Hoviatshahr, vol. 9, no. 24, pp. 55–64, 2016, [Online]. Available: http://hoviatshahr.srbiau.ac.ir/article_8787.html. (In Persion)
A. Rezaei, H. Lakaei, A. H. Bari, and T. A. Mekaeili, “Construction of sustainable environment and landscape on the borderline-parks of Yazd province,” Journal of Environmental Science and Technology, vol. 17, no. 3, pp. 159-169, 2015. (In Persion)
M. Ghodsi, K. Daneshjoo, and S. M. Mofidi Shemirani, “Impact of geometric indicators on residential thermal behavior in hot arid climate (case study: Yazd),” Naqshejahan-Basic Stud. New Technol. Archit. Plan., vol. 8, no. 3, pp. 143–148, 2018. (In Persion)
H. S. Avazalipour and Y. Taghizadeh, “Designing a native pattern in arid climate to reduce energy consumption in housing sector (Case study: Yazd),” Journal of Environmental Science and Technology, vol. 21, no. 3, pp. 227-236, 1970, doi: 10.22034/jest.2019.14554. (In Persion)
“Yazd, Iran - Detailed climate information and monthly weather forecast | Weather Atlas.” https://www.weather-atlas.com/en/iran/yazd-climate#daylight_sunshine (accessed Jul. 12, 2020).
S. Hasanpourloumer and S. Toofan, “Visual and Structural Features of Sash Windows in Masouleh Historical City,” Islam. Art Stud., vol. 15, no. 34, pp. 72–92, 2019, doi: 10.22034/ias.2019.93927. (In Persion)
S. N. Hosseini, S. M. Hosseini, and M. HeiraniPour, “The Role of Orosi’s Islamic Geometric Patterns in the Building Façade Design for Improving Occupants’ Daylight Performance,” J. Daylighting, vol. 7, no. 2, pp. 201–221, 2020.
A. Ganji Kheybari, D. Diba, M. Mahdavinejad, and A. Shahcheraghi, “Algorithmic Design of ‘Palekane’ in order to Increase Efficiency of Daylight in Buildings,” Arman. Archit. Urban Dev., vol. 8, pp. 35–52, 2015, [Online] Available: http://www.armanshahrjournal.com/article_39305.html. (In Persion)
M. Mahdavinejad and A. Kia, “Contemporarization of traditional facade skins (lattice) in Iranian architecture for optimization of daylight and energy. Case study: Tehran office buildings,” AHDC, vol. 7, no. 9, pp. 69–82, 2019, [Online]. Available: http://smb.yazd.ac.ir/article_1655.html.
H.-J. Kim, C.-S. Yang, and H. J. Moon, “A Study on Multi-Objective Parametric Design Tool for Surround-Type Movable Shading Device,” Sustainability, vol. 11, no. 24, p. 7096, 2019.
_||_
N. Noroozian, “Localization pattern for assessment of energy efficiency in buildings in Tehran,” Naqshejahan-Basic Stud. New Technol. Archit. Plan., vol. 6, no. 3, pp. 63–74, 2016. (In Persion)
T. Nasr, Z. Yarmahmoodi, and S. M. Ahmadi, “The Effect of Kinetic Shell’s Geometry on Energy Efficiency Optimization Inspired by Kinetic Algorithm of Mimosa pudic,” Naqshejahan-Basic Stud. New Technol. Archit. Plan., vol. 10, no. 3, pp. 219–230, 2020. (In Persion)
Shokoufeh Avazalipour Haqiqatparast, Y. Taghizadeh, and H. Zabihi, “Designing a native pattern in arid climate to reduce energy consumption in housing sector (Case study: Yazd),” J. Environ. Sci. Technol., vol. 21, no. 3, pp. 227–236, 1970, doi: 10.22034/jest.2019.14554. (In Persion)
A. Sharghi and A. Ghanbaran, “Inspiration of Nature in Training of Architecture,” J. Environ. Sci. Technol., vol. 14, no. 3, pp. 107–118, 2012, [Online]. Available: https://jest.srbiau.ac.ir/article_1708.html. (In Persion)
S. Samadi, E. Noorzai, L. O. Beltrán, and S. Abbasi, “A computational approach for achieving optimum daylight inside buildings through automated kinetic shading systems,” Front. Archit. Res., vol. 9, no. 2, pp. 335–349, 2020.
H. Sghiouri, M. Charai, A. Mezrhab, and M. Karkri, “Comparison of passive cooling techniques in reducing overheating of clay-straw building in semi-arid climate,” in Building Simulation, 2020, vol. 13, no. 1, pp. 65–88.
M. Rasuli, Y. Shahbazi, and M. Matini, “Horizontal and Vertical Movable Drop-Down Shades Performance in Double Skin Facade of Office Buildings; Evaluation and Parametric Simulation,” Naqshejahan-Basic Stud. New Technol. Archit. Plan., vol. 9, no. 2, pp. 135–144, 2019. (In Persion)
X. Shi, T. Abel, and L. Wang, “Influence of two motion types on solar transmittance and daylight performance of dynamic façades,” Sol. Energy, vol. 201, pp. 561–580, 2020.
M. Haghshenas, M. R. Bemanian, and Z. Ghiabaklou, “Analysis the Criteria of Solar Trasmittance from Stained Glasses Used in Some of the Orosis from Safavid Dynasty,” J. Color Sci. Technol., vol. 10, no. 1, pp. 55–64, 2016, [Online]. Available: http://jcst.icrc.ac.ir/article_76183.html.
M. Haghshenas and Z. Ghiabaklou, “Investigation of tinted glazing’s effect in transmission of daylight and energy in the visible spectrum,” J. Color Sci. Technol., vol. 2, no. 4, p. 213û220, 2009.
A. Mohammadi and S. M. H. Ayatollahi, “Designing a Model Shading Device for Booshehr City,” Soffeh, vol. 21, no. 3, pp. 45–56, 2012, [Online]. Available: https://soffeh.sbu.ac.ir/article_100364.html. (In Persion)
M. A. Fadaii Ardestani, H. Nasseri Mobaaraki, M. R. Ayatollahi, and Z. S. Zomorrodian, “The Assessment of Daylight and Glare in Classrooms Using Dynamic Indicators; the Case of SBU Faculty of Architecture and Urban Planning,” Soffeh, vol. 28, no. 4, pp. 25–40, 2018, [Online]. Available: https://soffeh.sbu.ac.ir/article_100759.html. (In Persion)
M. Asghari, Z. Poolaei, and H. Yazdani, “Evaluation of Window overhang and External wall thermal Conductivity reduction Effect On office Cooling load in 3 Climates Hot and Humidity, Mild and Cold,” J. Mech. Eng., vol. 48, no. 4, pp. 331–335, 2019, [Online]. Available: https://tumechj.tabrizu.ac.ir/article_8430.html.
A. Heidari, M. Taghipour, and Z. Yarmahmoodi, “The Effect of Fixed External Shading Devices on Daylighting and Thermal Comfort in Residential Building,” J. Daylighting, vol. 8, no. 2, pp. 165–180, 2021.
A. Fathalian and H. Kargarsharif, “Investigating the Effect of Different Energy Saving Strategies on Energy Rating of Building by Design Builder Software (Case Study: Office Building),” J. Environ. Sci. Technol., vol. 22, no. 7, pp. 199–214, 2020, doi: 10.22034/jest.2019.42973.4590. (In Persion)
L. G. Valladares-Rendón and S.-L. Lo, “Passive shading strategies to reduce outdoor insolation and indoor cooling loads by using overhang devices on a building,” in Building Simulation, 2014, vol. 7, no. 6, pp. 671–681.
A. Aldawoud, “Conventional fixed shading devices in comparison to an electrochromic glazing system in hot, dry climate,” Energy Build., vol. 59, pp. 104–110, 2013.
P. M. Esquivias, C. M. Munoz, I. Acosta, D. Moreno, and J. Navarro, “Climate-based daylight analysis of fixed shading devices in an open-plan office,” Light. Res. Technol., vol. 48, no. 2, pp. 205–220, 2016.
L. G. Valladares-Rendón, G. Schmid, and S.-L. Lo, “Review on energy savings by solar control techniques and optimal building orientation for the strategic placement of façade shading systems,” Energy Build., vol. 140, pp. 458–479, 2017.
G. Kim, H. S. Lim, T. S. Lim, L. Schaefer, and J. T. Kim, “Comparative advantage of an exterior shading device in thermal performance for residential buildings,” Energy Build., vol. 46, pp. 105–111, 2012.
F. D. Miran and H. K. Abdullah, “Evaluation of the Optimal Solar Shading Devices for Enhancing Daylight Performance of School Building (A case study semi-arid Clim. city),” ZANCO J. Pure Appl. Sci, vol. 28, pp. 580–598, 2016.
F. Zare and S. Heidari, “Architectural Design Based on Daylight Utilization- An Approach for Library Design in Tehran,” Hoviatshahr, vol. 9, no. 24, pp. 55–64, 2016, [Online]. Available: http://hoviatshahr.srbiau.ac.ir/article_8787.html. (In Persion)
A. Rezaei, H. Lakaei, A. H. Bari, and T. A. Mekaeili, “Construction of sustainable environment and landscape on the borderline-parks of Yazd province,” Journal of Environmental Science and Technology, vol. 17, no. 3, pp. 159-169, 2015. (In Persion)
M. Ghodsi, K. Daneshjoo, and S. M. Mofidi Shemirani, “Impact of geometric indicators on residential thermal behavior in hot arid climate (case study: Yazd),” Naqshejahan-Basic Stud. New Technol. Archit. Plan., vol. 8, no. 3, pp. 143–148, 2018. (In Persion)
H. S. Avazalipour and Y. Taghizadeh, “Designing a native pattern in arid climate to reduce energy consumption in housing sector (Case study: Yazd),” Journal of Environmental Science and Technology, vol. 21, no. 3, pp. 227-236, 1970, doi: 10.22034/jest.2019.14554. (In Persion)
“Yazd, Iran - Detailed climate information and monthly weather forecast | Weather Atlas.” https://www.weather-atlas.com/en/iran/yazd-climate#daylight_sunshine (accessed Jul. 12, 2020).
S. Hasanpourloumer and S. Toofan, “Visual and Structural Features of Sash Windows in Masouleh Historical City,” Islam. Art Stud., vol. 15, no. 34, pp. 72–92, 2019, doi: 10.22034/ias.2019.93927. (In Persion)
S. N. Hosseini, S. M. Hosseini, and M. HeiraniPour, “The Role of Orosi’s Islamic Geometric Patterns in the Building Façade Design for Improving Occupants’ Daylight Performance,” J. Daylighting, vol. 7, no. 2, pp. 201–221, 2020.
A. Ganji Kheybari, D. Diba, M. Mahdavinejad, and A. Shahcheraghi, “Algorithmic Design of ‘Palekane’ in order to Increase Efficiency of Daylight in Buildings,” Arman. Archit. Urban Dev., vol. 8, pp. 35–52, 2015, [Online] Available: http://www.armanshahrjournal.com/article_39305.html. (In Persion)
M. Mahdavinejad and A. Kia, “Contemporarization of traditional facade skins (lattice) in Iranian architecture for optimization of daylight and energy. Case study: Tehran office buildings,” AHDC, vol. 7, no. 9, pp. 69–82, 2019, [Online]. Available: http://smb.yazd.ac.ir/article_1655.html.
H.-J. Kim, C.-S. Yang, and H. J. Moon, “A Study on Multi-Objective Parametric Design Tool for Surround-Type Movable Shading Device,” Sustainability, vol. 11, no. 24, p. 7096, 2019.
