Preparation and Mechanical Properties of Compositionally Graded Polyethylene/Clay Nanocomposites
الموضوعات :
M.H Yas
1
(Department of Mechanical Engineering, Engineering Faculty, Razi University, Kermanshah, Iran)
M Karami Khorramabadi
2
(Department of Mechanical Engineering, Engineering Faculty, Razi University, Kermanshah, Iran)
الکلمات المفتاحية: Polyethylene, montmorillonite, Compositionally graded, Solution technique, Melt mixing technique,
ملخص المقالة :
This paper presents the preparation and mechanical properties of compatibilized compositionally graded Polyethylene/ low density polyethylene (LDPE)/ modified montmorillonite (MMT) nanocomposites prepared by solution and melt mixing techniques. Use of polyethylene glycol as compatibilizer improves compatibility of modified montmorillonite and low density polyethylene. Comparisons between two techniques show that the melt mixing technique is the preferred method for preparation the Polyethylene/Clay nanocomposites for uniform and compositionally graded distributions. It is observed, the addition of Nano clay improves the mechanical properties like tensile strength. Also, it is noticed the mechanical properties of compositionally graded Polyethylene/Clay nanocomposites are improved rather than the uniform distribution of Polyethylene/Clay nanocomposites. The morphology of nanocomposites cross section samples is studied by Scanning Electron Microscopy (SEM) and finally the comparison are made between two techniques and then between compositionally graded polyethylene/clay nanocomposites with uniform ones. Its show that when the compatibilizer was added for melt mixing technique, the density and the size of the aggregates decreased, which indicates that the dispersion of nano clays within the polymer matrix is much better.
[1] Rado R., Zelenak P., 1992, Cross linking of polyethylene , International Polymer Science and Technology 19(6): 33-47.
[2] Thorburn B., 1994, Cross linking techniques for electrical jacketing materials, Proceedings of ANTEC 94 Conference, San Francisco.
[3] Roberts B.E., Verne S., 1984, Applications of different methods of cross linking polyethylene, Plastic and Rubber Processing and Applications 4(2): 135-139.
[4] Kawasumi M., Hasegawa N., Kato M., Usuki A., Okada A., 1997, Preparation and mechanical properties of polypropylene-clay hybrids, Macromolecules 30(20): 6333-6338.
[5] Tan H., Yang W., 1998, Toughening mechanisms of nano-composite ceramics, Mechanics of Materials 30(2): 111-123.
[6] Han Y., Wang Z., Li X., Fu J., Cheng Z., 2001, Polymer-layered silicate nanocomposites: synthesis, characterization, properties and applications, Current Trends in Polymer Science 6(1): 1-16.
[7] Kornmann X., Lindberg H., Berglund L.A., 2001, Synthesis of epoxy-clay nanocomposites: inluence of the nature of the clay on structure, Polymer 42(4): 1303-1310.
[8] Utracki L.A., Kamal M.R., 2002, Clay-containing polymeric nanocomposites, Arabian Journal for Science and Engineering 27(1): 43-67.
[9] Hotta S., Paul D.R., 2004, Nanocomposites formed from linear low density polyethylene and organoclays, Polymer 45(22): 7639-7654.
[10] Zhao K., He K., 2006, Dielectric relaxation of suspensions of nanoscale particles surrounded by a thick electric double layer, Physical Review B 74(20): 1-10.
[11] Awaji H., Nishimura Y., Choi S., Takahashi Y., Goto T., Hashimoto S., 2009, Toughening mechanism and frontal process zone size of ceramics, Journal of the Ceramic Society of Japan 117(65): 623-629.
[12] Chen L., Chen G., 2009, Relaxation behavior study of silicone rubber cross linked network under static and dynamic compression by electric response, Polymer Composites 30(1): 101-106.
[13] Kim P.N., Doss M., Tillotson J.P., 2009, High energy density nanocomposites based on surface-modified BaTiO3 and a ferroelectric polymer, ACS Nano 3(9): 2581-2592.
[14] Zhao C., Qin H., Gong F., Feng M., Zhang S., Yang M., 2005, Mechanical, thermal and flammability properties of polyethylene/clay nanocomposites, Polymer Degradation and Stability 87(1): 183-189.
[15] Huang G., Zhu B., Shi H., 2011, Effect of organics-modified montmorillonite with intumescent flame retardants on thermal stability and ire behavior of polyethylene nanocomposites, Journal of Applied Polymer Science 121(3): 1285-1291.
[16] Meneghetti P., Qutubuddin S., 2006, Synthesis, thermal properties and applications of polymer-clay nanocomposites, Hermo Chimica Acta 442(1): 74-77.
