Free Vibration of Functionally Graded Cylindrical Shell Panel With and Without a Cutout
الموضوعات :
k.S Sai Ram
1
(Department of Civil Engineering RVR&JC College of Engineering Chowdavaram Guntur, India)
K Pratyusha
2
(Department of Civil Engineering RVR&JC College of Engineering Chowdavaram Guntur, India)
P Kiranmayi
3
(Department of Civil Engineering RVR&JC College of Engineering Chowdavaram Guntur, India)
الکلمات المفتاحية: Free vibration, Finite Element Method, Functionally Graded Materials, Higher-order shear deformation theory, Cylindrical shell panel with a cutout,
ملخص المقالة :
The free vibration analysis of the functionally graded cylindrical shell panels with and without cutout is carried out using the finite element method based on a higher-order shear deformation theory. A higher-order theory is used to properly account for transverse shear deformation. An eight noded degenerated isoparametric shell element with nine degrees of freedom at each node is considered. The stiffness and mass matrices are derived based on the principle of minimum potential energy. The stiffness and mass matrices of the element are evaluated by performing numerical integration using the Gaussian quadrature. The effect of volume fraction exponent on the fundamental natural frequency of simply supported and clamped functionally graded cylindrical shell panel without a cutout is studied for various aspect ratios and arc-length to thickness ratios. Results are presented for variation of the fundamental natural frequency of the cylindrical shell panel with cutout size for simply supported and clamped boundary conditions.
[1] Loy C.T., Lam K.Y., Reddy J.N., 1999, Vibration of functionally graded cylindrical shells, International Journal of Solids and Structures 41: 309-324.
[2] Pradhan S.C., Loy C.T., Lan K.Y., Reddy J.N., 2000, Vibration characteristics of functionally graded cylindrical shells under various boundary conditions, Applied Accoustics 61: 11-129.
[3] Yang J., Shen H.S., 2003, Free vibration and parametric resonance of shear deformable functionally graded cylindrical panels, Journal of Sound and Vibration 261: 871-893.
[4] Patel B.P., Gupta S.S., Loknath M.S., Kadu C.P., 2005, Free vibration analysis of functionally graded elliptical cylindrical shells using higher order theory, Composite Structures 69: 259-270.
[5] Pradyumna S., Bandyopadhyay J.N., 2008, Free vibration analysis of functionally graded curved panels using higher order finite element formulation, Journal of Sound and Vibration 318: 176-192.
[6] Matsunaga H., 2009, Free vibration and stability of functionally graded circular cylindrical shells according to a 2-Dimensional higher order deformation theory, Composite Structures 88: 519-531.
[7] Zhao X., Lee Y.Y., Liew K.M., 2009, Thermo elastic and vibration analysis of functionally graded cylindrical shells, International Journal of Mechanical Sciences 51: 694-707.
[8] Tornabene F., Erasmo V., 2009, Free vibrations of four-parameter functionally graded parabolic panels and shells of revolution, European Journal of Mechanics - A/Solids 28: 991-1013.
[9] Kiani Y., Shakeri M., Eslami M.R., 2012, Thermoelastic free vibration and dynamic behavior of FGM doubly curved panel via the analytical hybrid Laplace-Fourier transformation, Acta Mechanica 223: 1199-1218.
[10] Qu Y., Yuan G., Meng G.,2013, A unified formulation for vibration analysis of functionally graded shells of revolution with arbitrary boundary conditions, Composites Part B 50: 381-402.
[11] Fadaee M., Atashipour S.R., Hasnemi S., 2013, Free vibration analysis of Levy-type functionally graded spherical shell panel using a new exact closed-form solution, International Journal of Mechanical Sciences 77: 227-238.
[12] Malekzadeh P., Bahranifard F., Ziaee S., 2013, Thrre-dimensional free vibration analysis of functionally graded cylindrical panels with cutout using Chebyshev-Ritz method, Composite Structures 105: 1-13.
[13] Ebrahimi M.J., Najafizadeh M.M., 2014, Free vibration analysis of 2-Dimensional functionally graded cylindrical shells, Applied Mathematical Modeling 38: 308-324.
[14] Su Z., Jin G., Shi S., Ye T., 2014, A unified accurate solution for vibration analysis of arbitrary functionally graded spherical shell segments with general end restraints, Composite Structures 111: 271-284.
[15] Ye T., Jin G., Su Z., 2014, Three-dimensional vibration analysis of laminated functionally graded spherical shells with general boundary conditions, Composite Structures 116: 571-588.
[16] Su Z., Jin G., Ye T., 2014, Free vibration analysis of moderately thick functionally graded open shells with general boundary conditions, Composite Structures 117: 169-186.
[17] Tornabene F., Nicholas F., Bacciocchi M., 2014, Free vibrations of free-form doubly curved shells made of functionally graded materials using higher-order equivalent single layer theories, Composites Part B 67: 490-509.
[18] Akbari M., Kiani Y., Aghdam M., Eslami M.R., 2014, Free vibration of FGM Levy conical panels, Composite Structures 116: 732-746.
[19] Bahadori R., Najafizadeh M.M., 2015, Free vibration analysis of 2-Dimensional functionally graded axi-symmetric cylindrical shell on Winkler-Pasternak elastic foundation by first order shear deformation theory and using Navier differential quadrature solution methods, Applied Mathematical Modeling 39: 4877- 4894.
[20] Tornabene F., Brischetto S., Fantuzzi N., Viola E., 2015, Numerical and exact models for free vibration analysis of cylindrical and Spherical shell panels, Composites Part B 81: 231-250.
[21] Xie X., Hui Z., Jin G., 2015, Free vibration of four-parameter functionally graded spherical and parabolic shells of revolution with arbitrary boundary conditions, Composites Part B 77: 59-73.
[22] Mirzaei M., Kiani Y., 2016, Free vibration of functionally graded carbon nanotube reinforced composite cylindrical panels, Composite Structures 142: 45-56.
[23] Kiani Y., 2016, Free vibration of carbon nanotube reinforced composite plate on point supports using Lagrangian multipliers, Mechanica 52: 1353-1367.
[24] Kiani Y., 2017, Free vibration of FG-CNT reinforced composite spherical shell panels using Gram-Schmidt shape functions, Composite Structures 159: 368-381.
[25] Cook R.D., Malkus D.S., Plesha M.E., 1989, Concepts and Applications of Finite Element Analysis, John Wiley, New York .
[26] Zienkiewicz O.C.,Taylor R.L.,1991, The Finite Element Method, McGraw-Hill, London.
[27] Sai Ram K.S., Sreedhar Babu T.,2001, Study of bending of laminated composite shells Part I : shells without a cutout, Composite structures 51: 103-116.
[28] Bathe K.J., 1982, Finite Element Procedures in Engineering Analysis, Prentice-Hall, Englewood Cliffs, New Jersey.
[29] Mirzaei M., Kiani Y., 2016, Free vibration of functionally graded carbon-nanotube-reinforced composite plates with cutout, Beilstein Journal of Nanotechnology 7: 511-523.
[30] Liew K.M., Kitipornchai S., Leung A.V.T., Lim C.W., 2003, Analysis of the free vibration of rectangular plates with central cutouts using the discrete Ritz method, International Journal of Mechanical Sciences 45: 941-959.
[31] Lam K.Y., Hung K.C., Chow S.T., 1989, Vibration analysis of plates with cutouts by the modified Rayleigh-Ritz method, Applied Acoustics 28: 49-60.
[32] Mundkur G., Bhat R.B., Neriya S., 1994, Vibration of plates with cutouts using boundary characteristic orthogonal polynomial functions in the Rayleigh-Ritz method, Journal of Sound and Vibration 176: 136-144.
[33] Aksu G., Ali R., 1976, Determination of dynamic characteristics of rectangular plates with cutouts using a finite difference formulation, Journal of Sound and Vibration 44: 147-158.
