Preparation and characterization of iron (III) phthalocyanine chloride to be employed for desulphurization of JP4 jet fuel compared to nickel powder

Subject Areas :

ali eftekhari ¹ (M.Sc. Student in Department of Chemical Engineering, Central Tehran Branch, Islamic Azad University, Tehran, Iran)
reza eskandari sedighi ² (Academic Staff in Strategic Studies and Theoretical Research Center, Shahid Sattari University, Tehran, Iran)
vahid pirouzfar ³ (Assistant Prof. in Department of Chemical Engineering, Central Tehran Branch, Islamic Azad University, Tehran, Iran)
afshar ali hoseini ⁴ (Assistant Prof. in Department of Chemical Engineering, Central Tehran Branch, Islamic Azad University, Tehran, Iran)

Received: 2019-08-22 Accepted : 2019-10-23 Published : 2020-08-22

Keywords: nanocomposite, Phthalocyanine, Nickel powder, desulphurization, JP4 jet fuel,

Abstract :

In this research, C32H16ClFeN8 nanocomposite was synthesized with the use of iron (III) chloride, urea and phthalic anhydride precursors for desulfurization of JP4 jet fuel. Nickel powder was also used in a separate process and its desulphurization ability was compared with Raney nickel alloy and the synthesized nanocomposite. X-ray powder diffraction (XRD) and atomic absorption spectroscopy (AAS), and Fourier transform infrared spectroscopy (FTIR) were used to identify the prepared samples. Scanning electron microscopy (SEM) was used to determine the morphology of the particles. Brunauer–Emmett–Teller (BET) method was applied to determine the surface area, pore volume, and pore diameter of the samples. Desulfurization of JP4 jet fuel in the presence of C32H16ClFeN8 nanocomposite under ultrasonic and a mild condition (temperature: 25-35 °C and atmospheric pressure) was performed. The obtained results indicated that the prepared nanocomposite due to its safety is competitive with nickel powder.

References:

[1] Heilmerier, G.H.; Harrison, S.E.; Physical Review Journals 132, 2010-2018, 1963.
[2] Waychunas, G.A.; Apted, M.J.; Brown, G.E.; Physics and Chemistry of Minerals 10, 1–9, 1983.
[3] Ankudinov, A.L.; Bouldin, C.E.; Rehr, J.J.; Sims, J.; Hung, H.; Phys. Rev. B 65, 104107-104112, 2002.
[4] Li, M.; Robert Scheidt, W.; National Center for Biotechnology Information 12, 380–384, 2014.
[5] Department of Agriculture, Water and the Environment; “Nickel and compounds [Fact Sheets]”, National Pollutant Inventory, Australia, 2012.
[6] Gerhard, E.; Helmut, K.; Preparation of Solid Catalysts 3, 29826-29832, 1997.
[7] Armour, M.A.; Hazardous laboratory chemicals disposal guide 3, 331-337, 2003.
[8] Hauptmann, H.; Wolfgang Ferdinand, W.; Chem. Rev. 62, 347-352, 1962.
[9] Karimi, A.H.; Miranbeigi, A.A.; Zendehnam, A.; Vahid, A.; Journal of Applied Researches in Chemistry, 10(2), 85-95, 2016.
[10] Bazmi, M.; Tajerian, M.; Ghadiri, R.; Naghipour, P.; 2nd Technology Development of Iranian Oil Industry Conference, Tehran, 2004.
[11] Meyers, R.A.; “Handbook of Petroleum Refining Processes”, Second Edition, McGraw-Hill, USA, 1996  
[12] Mazgarov, A.M.; Vil'danov, A.F.; Sukhov, S.N.; Ormiston, R.M.; Chemistry and Technology of Fuels and Oils, 32(6), 277-280, 1996.
[13] Groysman, A.; “Corrosion in Systems for Storage and Transportation of Petroleum Products and Biofuels, Identification, Monitoring and Solutions”, Springer, Netherlands, 2014.

_||_