Subject Areas :

سعید علی اکبری ثانی ¹ (دانشگاه علم و صنعت ایران)
غلامرضا ابراهیمی ² (گروه مهندسی مواد و پلیمر-دانشکده مهندسی-دانشگاه حکیم سبزواری)

Received: 2015-10-18 Accepted : 2015-12-21 Published : 2015-11-22

Keywords:

References:

 

[1]     J. C. Lippold & D. J. Kotecki, “Welding metallurgy and weldability of stainless steels”, New York, 2005.

 

[2]     J. Jonas, “Dynamic recrystallization—scientific curiosity or industrial tool?”, Materials Science and Engineering: A, Vol. 184, pp. 155-165, 1994.

 

[3]     N. Fujita, R. Sahara, T. Narushima & C. Ouchi, “Austenitic grain growth behavior immediately after dynamic recrystallization in HSLA steels and austenitic stainless steel”, ISIJ international, Vol. 48, pp. 1419-1428, 2008.

 

[4]     Q.-Y. Liu, S.-H. Deng, X.-J. Sun, H. Dong & Y.-Q. Weng, “Effect of dissolved and precipitated niobium in microalloyed steel on deformation induced ferrite transformation (DIFT)”, Journal of Iron and Steel Research, International, Vol. 16, pp. 67-71, 2009.

 

[5]     E. Pereloma, B. Crawford & P. Hodgson, “Strain-induced precipitation behaviour in hot rolled strip steel”, Materials Science and Engineering: A, Vol. 299, pp. 27-37, 2001.

 

[6]     M. Akben, I. Weiss & J. J. Jonas, “Dynamic precipitation and solute hardening in AV microalloyed steel and two Nb steels containing high levels of Mn”, Acta Metallurgica, Vol. 29, pp. 111-121, 1981.

 

[7]     F. Humphreys & M. Hatherly, “Recrystallization and Related Annealing Phenomena”, Elsevier, 2004.

 

[8]     M. Akben, B. Bacroix & J. Jonas, “Effect of vanadium and molybdenum addition on high temperature recovery, recrystallization and precipitation behavior of niobium-based microalloyed steels”, Acta Metallurgica, Vol. 31, pp. 161-174, 1983.

 

[9]     S. Vervynckt, K. Verbeken, P. Thibaux & Y. Houbaert, “Recrystallization – precipitation interaction during austenite hot deformation of a Nb microalloyed steel”, Materials Science and Engineering: A, Vol. 528, pp. 5519-5528, 2011.

 

[10] K. Tiitto, G. Fitzsimons & A. DeArdo, “The effect of dynamic precipitation and recrystallization on the hot flow behavior of a Nb-V microalloyed steel”, Acta Metallurgica, Vol. 31, pp. 1159-1168, 1983.

 

[11] S. Vervynckt, K. Verbeken, P. Thibaux, M. Liebeherr & Y. Houbaert, “Austenite Recrystallization–Precipitation Interaction in Niobium Microalloyed Steels”, ISIJ international, Vol. 49, pp. 911-920, 2009.

 

[12] M. Mirzaee, H. Keshmiri, G. R. Ebrahimi & A. Momeni, “Dynamic recrystallization and precipitation in low carbon low alloy steel 26NiCrMoV 14-5”, Materials Science and Engineering: A, Vol. 551, pp. 25-31, 2012.

 

[13] A. Abdollah-Zedeh & D. Dunne, “Effect of Nb on recrystallization after hot deformation in austenitic Fe-Ni-C”, ISIJ international, Vol. 43, pp. 1213-1218, 2003.

 

[14] H. Wu, L. Du & X. Liu, “Dynamic Recrystallization and Precipitation Behavior of Mn-Cu-V Weathering Steel”, Journal of Materials Science & Technology, Vol. 27, pp. 1131-1138, 2011.

 

[15] G. R. Ebrahimi, H. Keshmiri, A. Momeni & M. Mazinani, “Dynamic recrystallization behavior of a superaustenitic stainless steel containing 16% Cr and 25% Ni”, Materials Science and Engineering: A, Vol. 528, pp. 7488-7493, 2011.

 

[16] Z. Zeng, L. Chen, F. Zhu & X. Liu, “Dynamic Recrystallization Behavior of a Heat-resistant Martensitic Stainless Steel 403Nb during Hot Deformation”, Journal of Materials Science & Technology, Vol. 27, pp. 913-919, 2011.

 

[17] G. Ebrahimi, H. Keshmiri, A. Maldad & A. Momeni, “Dynamic recrystallization behavior of 13% Cr martensitic stainless steel under hot working condition”, Journal of Materials Science & Technology, Vol. 28, pp. 467-473, 2012.

 

[18] C. Imbert & H. McQueen, “Dynamic recrystallization of A2 and M2 tool steels”, Materials Science and Engineering: A, Vol. 313, pp. 104-116, 2001.

 

[19] A. Momeni & K. Dehghani, “Characterization of hot deformation behavior of 410 martensitic stainless steel using constitutive equations and processing maps”, Materials Science and Engineering: A, Vol. 527, pp.5467-5473, 2010.

 

[20] T. Sourmail, “Precipitation in creep resistant austenitic stainless steels”, Materials science and technology, Vol. 17, pp. 1-14, 2001.

 

[21] G. V. Voort, “ASM Handbook-Metallography and microstructures”, American Society for Metals, 2004.

 

[22] A. Momeni, H. Arabi, A. Rezaei, H. Badri & S. Abbasi, “Hot deformation behavior of austenite in HSLA-100 microalloyed steel”, Materials Science and Engineering: A, Vol. 528, pp. 2158-2163, 2011.

 

[23] B. Wang, W. Fu, Z. Lv, P. Jiang, W. Zhang & Y. Tian, “Study on hot deformation behavior of 12% Cr ultra-super-critical rotor steel”, Materials Science and Engineering: A, Vol. 487, pp. 108-113, 2008.

 

[24] A. Momeni, K. Dehghani, H. Keshmiri & G. Ebrahimi, “Hot deformation behavior and microstructural evolution of a superaustenitic stainless steel”, Materials Science and Engineering: A, Vol. 527, pp. 1605-1611, 2010.

 

[25] Z.-h. Zhang, Y.-n. Liu, X.-k. Liang & Y. She, “The effect of Nb on recrystallization behavior of a Nb micro-alloyed steel”, Materials Science and Engineering: A, Vol. 474, pp. 254-260, 2008

[26] .

[27] B. Verlinden, J. Driver, I. Samajdar & R. D. Doherty, “Thermo-mechanical processing of metallic materials”, 2007.

 

[28] C. Roucoules, S. Yue & J. Jonas, “Effect of alloying elements on metadynamic recrystallization in HSLA steels”, Metallurgical and Materials Transactions A, Vol. 26, pp. 181-190, 1995.

 

[29] F.-r. XIAO, Y.-b. CAO, G.-y. QIAO, X.-b. ZHANG & B. LIAO, “Effect of Nb Solute and NbC Precipitates on Dynamic or Static Recrystallization in Nb Steels”, Journal of Iron and Steel Research, International, Vol. 19, pp. 52-56, 2012.

 

[30] Y.-b. Cao, F.-r. Xiao, G.-y. Qiao, X.-b. Zhang & B. Liao, “Quantitative research on effects of Nb on hot deformation behaviors of high-Nb microalloyed steels”, Materials Science and Engineering: A, Vol. 530, pp. 277-284, 2011.

 

[31] M. Akben, T. Chandra, P. Plassiard & J. Jonas, “Dynamic precipitation and solute hardening in a titanium microalloyed steel containing three levels of manganese”, Acta Metallurgica, Vol. 32, pp. 591-601, 1984.

 

[32] L. XU, C.-y. WANG, G.-q. LIU & B.-z. BAI, “Hot deformation behavior of medium carbon VN microalloyed steel”, Transactions of Nonferrous Metals Society of China, Vol. 19, pp. 1389-1394, 2009.

 

[33] M. Yazdani, S. Abbasi, A. Momeni & A. Karimi Taheri, “Hot ductility of a Fe–Ni–Co alloy in cast and wrought conditions”, Materials & Design, Vol. 32, pp. 2956-2962, 2011.

 

[34] M. El Wahabi, L. Gavard, F. Montheillet, J. Cabrera & J. Prado, “Effect of initial grain size on dynamic recrystallization in high purity austenitic stainless steels”, Acta materialia, Vol. 53, pp. 4605-4612, 2005.

 

[35] Y.-b. Cao, F.-r. Xiao, G.-y. Qiao, C.-j. Huang, X.-b. Zhang, Z.-x. Wu & B. Liao, “Strain-induced precipitation and softening behaviors of high Nb microalloyed steels”, Materials Science and Engineering: A, Vol. 552, pp. 502-513, 2012.

 

[36] C. Garcıa-Mateo, B. Lopez & J. Rodriguez-Ibabe, “Static recrystallization kinetics in warm worked vanadium microalloyed steels”, Materials Science and Engineering: A, Vol. 303, pp. 216-225, 2001.

 

[37] J.-h. YANG, Q.-y. LIU, D.-b. Sun & X.-y. LI, “Recrystallization behavior of deformed austenite in high strength microalloyed pipeline steel”, Journal of Iron and Steel Research, International, Vol. 16, pp. 75-80, 2009.

 

[38] A. Pandit, A. Murugaiyan, A. S. Podder, A. Haldar, D. Bhattacharjee, S. Chandra & R. Ray, “Strain induced precipitation of complex carbonitrides in Nb–V and Ti–V microalloyed steels”, Scripta materialia, Vol. 53, pp. 1309-1314, 2005.

 

[39] A. DeArdo, J. Gray & L. Meyer, “Fundamental metallurgy of niobium in steel”, Niobium, Vol. pp. 685-759, 1981.

 

[40] Z. Zeng, L. Chen, F. Zhu & X. Liu, “Static recrystallization behavior of a martensitic heat-resistant stainless steel 403 Nb”, Acta Metallurgica Sinica(English Letters), Vol. 24, pp. 381-389, 2011.