Subject Areas :

سعید نادر ¹ (دانشجوی کارشناسی ارشد، دانشکده مهندسی مواد، واحد نجف آباد، دانشگاه آزاد اسلامی، نجف آباد، اصفهان)
مسعود کثیری ² (استادیار، دانشکده مهندسی مواد، واحد نجف آباد، دانشگاه آزاد اسلامی، نجف آباد، اصفهان)
مرتضی شمعانیان ³ (دانشیار، دانشکده مهندسی مواد، دانشگاه صنعتی اصفهان)

Received: 2015-09-15 Accepted : 2015-09-15 Published : 2015-08-23

Keywords:

References:

[1]     Fari, G. F.Batalha, E. F. Prados, R. Magnabosco & S. Delijaicov, “Tool Wear Evaluations in Fraction Stir Processing of Commercial Titanium Ti-6Al-4V”, Science Direct, 2012.

 [2]     M. Kurtulmus, “Friction Stir Spot Welding Parameters For Polpropylene Sheets”, Department of Materials Technology, Vol. 7, pp. 947-956, 2012.

 [3]     M. Kemal Bilici, “Application of Taguchi Approach to optimiz FSSW Parameters of Polypropylene”, Materials and Design, Vol. 35, pp. 113-119, 2012.

 [4]     K. V. Jata, P. R. Subramanian, A. P. Trapp & E. Helder, “Friction stir welding of titanium alloys for aerospace applications: microstructure and mechanical behavior”, international offshore and polar engineering conference, pp. 22-27, 2004.

 [5]     J. Ramirez & M. C. Juhas, “Microstructural evolution in Ti–6Al–4V friction stir welds”, Materials Science and Engineering, pp. 426-432, 2003.

 [6]     M. J. Russell & R. Freeman, “FSW for titanium”, Metal working production, pp. 30, 2007.

 [7]     Z. Feng, M. L. Santella & S. A. David, “Friction Stir Spot Welding of Advanced High-Strength Steels A Feasibility Study”, SAE International, pp. 1–7, 2005.

 [8]     Y. Zhang, Y. Sato, H. Kokawa, S. C. Park & S. Hirano, “Microstructueral characteristics and mechanical properties of Ti-6Al-4V friction stir welds”, Material Science and Engineering, Vol. 485 A, pp. 448-445, 2008.

 [9]     Y. Zhang, Y. Sato, H. Kokawa, S. C. Park & S. Hirano, “Micostructueral characteristics and mechanical properties of Ti-6Al-4V friction stir welds”, Material Science and Engineering, Vol. 485 A, pp. 448-445, 2007.

 [10] H. J. Liu, L. Zhou & Q. W. Liu, “Microstructural characteristics and mechanical properties of friction stir welded joints of Ti-6Al-4V titanium alloy”, Materials and Design, pp. 1650-1655, 2009.

 [11] L. Zhou, H. J. Liu & Q.W. Liu, “Effect of Rotation Speed on Microstructur and mechanical properties of Ti-6Al-4V friction stir welded joints”, Materials and Design, 2009.

 [12] W. B. Lee, C. Y. Lee & W. S. Chang, “Microstructural investigation of friction stir welded pure titanium”, Material Letters, Vol. 59, pp. 3315-3318, 2005.

 [13] M. C. Juhas, G. B. Viswanathan & H. L. Fraser, “Proceeding of the second symposium on friction stir welding, Gothenburg”, Sweden, June, 2000.

 [14] M. C. Juhas, G. B. Viswanathan & H. L. Fraser, in: K. Jata, E. W. Lee, W. Frazier & N. J. Kim (Eds.), “Proceedings of theLightweight Alloys for Aerospace Application”, TMS, Warrendale, PA, USA, pp. 209–217, 2001.

 [15] T. J. Lienert, K. V. Jata, R. Wheeler & V. Seetharaman, in: Proceedings of the Joining of Advanced and SpecialtyMaterials III, ASM, Materials Park, USA, pp. 160, 2001.

 [16]   س. م. هاشمی فشارکی، م. جهازی و ع. خدابنده "بررسی اثر تغییرات سرعت پیشروی ابزار در فرآیند جوشکاری اصطکاکی اغتشاشی بر ریزساختار و خواص مکانیکی آلیاژ Ti-6Al-4V" دوازدهمین کنفرانس ملی جوش و بازرسی، اصفهان، ص 317-308، آبان 1390.

 [17] R. S. Mishra & Z. Y. Ma, “Friction Stir Welding and Processing”, Mater. Sci. Eng, Vol. 50, pp. 1-78, 2008.

 [18] G. Lutjering & J. C. Williams, “Titanium”, Second Edition, Springer-Verlag, Berlin, 2003.