A study on stamping of airliner’s tail connector part through FEM simulation

Subject Areas : Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering

Mohammad Sajjad Mahdieh ¹ , Farshad Nazari ² , Taif Ahmed Mussa ³ , Hossein Torfy Salehi ⁴

1 - Mechanical Dep. Shahid Chamran University of Ahvaz, Iran.
2 - Department of Mechanical Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran
3 - Department of Mechanical Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran
4 - Department of Mechanical Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran

Received: 2023-04-07 Accepted : 2023-08-22 Published : 2023-09-01

Keywords:

References:

 

• Sáenz de Argandoña, E., Galdos, L., Ortubay, R., Mendiguren, J., & Agirretxe, X. (2015). Room temperature forming of AA7075 aluminum alloys: W-temper process. Key Engineering Materials, 651, 199-204.


• Motiei, R., Pirmoradian, M., & Karimpour, H. (2022). The influence of various boundary conditions on dynamic stability of a beam-moving mass system. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 14(4), 13-24.


• Mahdieh, M. S., & Esteki, M. R. (2022). Feasibility Investigation of Hydroforming of Dental Drill Body by FEM Simulation. Journal of Modern Processes in Manufacturing and Production, 11(2), 71-84.


• Mahdieh, M. S., Monjezi, A., & Zare Reisabadi, M. R. (2023). Investigation of an Innovative Cleaning Method for the Vertical Oil Storage Tank by FEM Simulation. Iranian Journal of Materials Forming, 9(4), 5-12.


• Rafati, E., & Mahdieh, M. S. (2013). Investigation of variance of roller burnishing parameters on surface quality by Taguchi approach.


• Saraeian, P., Gholami, M., Behagh, A., Behagh, O., Javadinejad, H. R., & Mahdieh, M. (2016). Influence of vibratory finishing process by incorporating abrasive ceramics and glassy materials on surface roughness of ck45 steel. ADMT Journal, 9(4), 1-6.


• Vakili Sohrforozani, A., Farahnakian, M., Mahdieh, M. S., Behagh, A. M., & Behagh, O. (2019). A study of abrasive media effect on deburring in barrel finishing process. Journal of Modern Processes in Manufacturing and Production, 8(3), 27-39.


• Vakili Sohrforozani, A., Farahnakian, M., Mahdieh, M. S., Behagh, A. M., & Behagh, O. (2020). Effects of abrasive media on surface roughness in barrel finishing process. ADMT Journal, 13(3), 75-82.


• Mahdieh, M. S., Zadeh, H. M. B., & Reisabadi, A. Z. (2023). Improving surface roughness in barrel finishing process using supervised machine learning. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 15(2), 5-15.


• Zeini, M., & Pirmoradian, M. (2021). Design and construction of a unicycle robot controlled by its center of gravity. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(2), 59-73.


• Mahdieh, M. S., & Mahdavinejad, R. (2016). Comparative study on electrical discharge machining of ultrafine-grain Al, Cu, and steel. Metallurgical and Materials Transactions A, 47, 6237-6247.


• Mahdieh, M. S., & Mahdavinejad, R. A. (2017). A study of stored energy in ultra-fined grained aluminum machined by electrical discharge machining. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 231(23), 4470-4478.


• Mahdieh, M. S., & Mahdavinejad, R. (2018). Recast layer and micro-cracks in electrical discharge machining of ultra-fine-grained aluminum. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(3), 428-437.


• Siegert, K., Dannenmann, E., Wagner, S., & Galaiko, A. (1995). Closed-loop control system for blank holder forces in deep drawing. CIRP annals, 44(1), 251-254.


• Bruschi, S., Altan, T., Banabic, D., Bariani, P. F., Brosius, A., Cao, J., ... & Tekkaya, A. E. (2014). Testing and modelling of material behaviour and formability in sheet metal forming. CIRP Annals, 63(2), 727-749.


• Atxaga, G., Arroyo, A., & Canflanca, B. (2022). Hot stamping of aerospace aluminium alloys: Automotive technologies for the aeronautics industry. Journal of Manufacturing Processes, 81, 817-827.


• Yan, Z., Xiao, A., Zhao, P., Cui, X., Yu, H., & Lin, Y. (2022). Deformation behavior of 5052 aluminum alloy sheets during electromagnetic hydraulic forming. International Journal of Machine Tools and Manufacture, 179, 103916.


• Zhang, F., Lin, Y., Huang, Y., Zhang, Z., & Du, L. (2022). Forming characteristics of channel-section CFRP-aluminum hybrid profiles manufactured by inflatable mandrel assisted hot-pressing process. Composite Structures, 296, 115895.


• Deng, L., Wang, X., Jin, J., & Xia, L. (2017). Springback and hardness of aluminum alloy sheet part manufactured by warm forming process using non-isothermal dies. Procedia engineering, 207, 2388-2393.


• Hua, L., Zhang, W., Ma, H., & Hu, Z. (2021). Investigation of formability, microstructures and post-forming mechanical properties of heat-treatable aluminum alloys subjected to pre-aged hardening warm forming. International Journal of Machine Tools and Manufacture, 169, 103799.


• J Jia, F., Zhao, J., Kamali, H., Li, Z., Xie, H., Ma, L., ... & Jiang, Z. (2022). Experimental study on drawability of aluminium-copper composite in micro deep drawing. Journal of Materials Processing Technology, 307, 117662.


• Bueno, M., Galdos, L., de Argandoña, E. S., Weiss, M., Rolfe, B., Lou, Y., & Mendiguren, J. (2020). Strain rate effect on the fracture behavior of the AA5754 aluminum alloy. Procedia Manufacturing, 47, 1264-1269.


• Attar, H. R., Li, N., & Foster, A. (2021). A new design guideline development strategy for aluminium alloy corners formed through cold and hot stamping processes. Materials & Design, 207, 109856.


• Kandasamy, J., Subrahmanyam, K. V. R. K., & Kumar, D. K. (2019). Finite Element Simulation and Experimental Investigations on Flow behavior of Aluminum Alloys in Equal Channel Angular Pressing. Materials Today: Proceedings, 18, 5515-5522.


• Mahdieh, M. S., & Zare-Reisabadi, S. (2019). Effects of electro-discharge machining process on ultra-fined grain copper. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233(15), 5341-5349.


• Mahdieh, M. S. (2020). The surface integrity of ultra-fine grain steel, Electrical discharge machined using Iso-pulse and resistance–capacitance-type generator. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 234(4), 564-573.


• Mahdieh, M. S. (2020). Recast layer and heat-affected zone structure of ultra-fined grained low-carbon steel machined by electrical discharge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 234(5), 933-944.


• Ma, W. P., Wang, B. Y., Xiao, W. C., Yang, X. M., & Kang, Y. (2019). Springback analysis of 6016 aluminum alloy sheet in hot V-shape stamping. Journal of Central South University, 26(3), 524-535.