Subject Areas : journal of New Materials

حسن شریفی ¹ (استادیار، گروه مهندسی مواد، دانشکده فنی و مهندسی، دانشگاه شهرکرد)
مهدی حیدری ² (کارشناسی ارشد مهندسی مواد، دانشکده مهندسی مواد و متالورژی، دانشگاه علم و صنعت ایران)
مهدی دیواندری ³ (دانشیار، دانشکده مهندسی مواد و متالورژی، دانشگاه علم و صنعت ایران.)
علیرضا خاوندی ⁴ (دانشیار، دانشکده مهندسی مواد و متالورژی، دانشگاه علم و صنعت ایران.)

Received: 2015-12-17 Accepted : 2015-12-17 Published : 2013-06-22

Keywords:

References:

1- B. Venkataraman, and G. Sundararajan,"Correlation between the characteristics of themechanically mixed layer and wear behaviourof aluminum Al-7075 alloy and Al-MMCs",Wear, 245, 22–38, 2000.

2- یزدانی، ع. "تولید کامپوزیت های نانوساختار آلومینیوم-کاربید بور به روش اتصال تجمعی نورد" مجله مواد نوین ، دورهاول، شماره سوم، بهار90 ، ص 23 .

3- A. Meyveci, "Pin-on-disc characterizationof 2xxx and 6xxx aluminum alloys aged byprecipitation age hardening", Journal of Alloysand Compounds, 491, 278–283, 2010.

4- Y. Sahin, "Wear behavior of aluminumalloy and its composites reinforced by SiCparticles using statistical analysis", Materialsand Design, 24, 95–103, 2003.

5- S. C. Sharma, and B. M. Satish, "Drysliding wear of short glass fiber reinforcedzinc–aluminum composites", TribologyInternational, 31, 183–188, 1998.

6- L. J. Yang, "Wear coefficient equation foraluminum-based matrix composites againststeel disc", Wear, 255, 579–592, 2003.

7- J. Chen, C. Hao, and J. Zhang, "Fabricationof 3D-SiC network reinforced aluminum–matrix composites by pressureless infiltration",Materials Letters, 60, 2489-2492, 2006.

8- S. M. R. Mousavi Abarghouie, and S.M.Seyed Reihani, "Investigation of friction andwear behaviors of 2024 Al and 2024 Al/SiCpcomposite at elevated temperatures", Journalof Alloys and Compounds, 501, 326-332,2010.

9- F. Gul, and M. Acilar, "Effect of thereinforcement volume fraction on the drysliding wear behavior of Al-10Si/SiCp

composition produced by vacuum infiltrationtechnique", Composites Science andTechnology, 64, 1959–1970, 2004.

10- L. Babout, Y. Brechet, and E. Maire, "Onthe competition between particle fracture andparticle decohesion in metal matrixcomposites", Acta Materialia, 52, 4517–4525,2004.

11- P. H. Shipway, A. R. Kennedy, and A. J.Wilkes, "Sliding wear behavior of aluminumbasedmetal matrix composites produced by anovel liquid route", wear, 216, 160-171, 1998.

12- M.T. Abou El-Khair, and A. Abdel Aal,"Erosion – corrosion and surface protection ofA356 Al/ZrO2 composites produced by vortexand squeeze casting", Materials Science andEngineering A, 454-455, 156-163, 2007.

13- H. Chang, J. Binner, and R. Higginson,"Dry sliding wear behavior of Al(Mg)/Al2O3interpenetrating composites produced by apressureless infiltration technique", Wear, 268,166-171, 2010.

14- B. N. Pramila Bai,"Dry sliding wear ofA356-Al-SiC, composites", Wear, 157, 295-304, 1992.

15- H. Sharifi, M. Divandari, A. Khavandi, andM. H. Idris, "Effect of Al Powder and SilicaSol on the Structure and Mechanical Propertiesof Al2O3-ZrO2 Foams", Acta Metall. Sin., Vol.23, No.3, 1-8, 2010.

16- H. Sharifi, A. R. Khavandi, M. Divandari,M. and I. Hasbullah, "Effect of Magnesiumand Nickel Coating on the Wetting Behavior ofAlumina Toughened Zirconia by Molten Al –Mg", International Journal of Minerals,Metallurgy and Materials, Vol.19, No. 1, 77-82, 2012.