Subject Areas : journal of New Materials

میثم زرچی ¹ (عضو هیئت علمی دانشگاه آزاد اسلامی واحد دزفول، گروه مهندسی مواد، دزفول، ایران)

Received: 2015-12-17 Accepted : 2015-12-17 Published : 2013-06-22

Keywords:

References:

 1- L.T. Anderson, The Benefits of newrength low-alloy steel ,welding journal, P1-25, May 1997.

2- K.E. Easterling, Introduction to thePhysical Metallurgy of Welding. 8ed.(London): Butterworths Monograps in

Materials, 231p, 1995.

3- S. Liu, and J.E. Indacochea, Weldability of Steels, Metals Handbook, 14ed.(Ohio). American Society for Metals.

2006.

4- Linnert, Welding Metallurgy , AWS pub, volume 4. 1999.

5- Materials & Processing Databook ’91.Metal Progress. American Society forMetals, Vol. 234. No. 1 ,2001.

6- E.R. Bueno, “Welding ProcedureDevelopment of the AISI 4140 Steel WithPost-Weld Heat Treatment,” M.Sc. Thesis,

Universidad Federal de Santa Catharine,2004.

7- H. Avener Sideney, introduction tophysical metallurgy.2 Ed,. Mc graw-hill,1994 .

8- American Welding Society (AWS),Structural Welding Steel. Section 3.5.2. pp.58 and 66. Code D1.1/D1.1M:2006.

9- W. Galvery, Industrial press weldingessentials: 2 Ed, oxford university press,2003.

10- A. Aloraier, R.N. Ibrahim, and J.Ghojel, post-weld heat treatment in repairwelding by temper bead technique: role

bead sequence in metallurgical changes. J.Mater. Proc. Techno., 133–134, pp. 390–

398, 2008.

11- B. Irving, The challenge of weldingheat treatable alloy steels. Weld. J., 84(3),pp. 43–48,1999.

12- American Association of StateHighway and Transportation Officials(AASHTO)/AWS D1.5M/D1.5:, Bridge

Welding Code. C-12.14 Preheat and interpass temperature control. 387, 2008.

 13- C.E. Nino, “Developing Weld RepairProcedures Specifications With Post weldHeat Treating – Tempering Effects by

Thermal Cycles,” Ph.D. Thesis,Universidad Federal de Santa Catharine,2003.

14- ASTM International, 03.01 E140(Tables 4 and 5): 2009.

15- G.S. Mills, Fundamentals of preheat.Welding Innovation, Vol.XLX, No 2,Australasion award, 2002.