Investigation of corrosion behavior nanocrystalline Nickel-Cobalt coating by electrodeposition

Subject Areas : journal of New Materials

هادی مرادی ¹ , مهدی کاظمی خالدی ² , احمدعلی آماده ³

1 - کارشناس ارشد مهندسی مواد پژوهشکده علوم و فناوری مهام
2 - کارشناس ارشد مهندسی مواد دانشکده مهندسی مواد و متالورژی پردیس دانشکده های فنی دانشگاه تهران
3 - دانشیار دانشکده مهندسی مواد پردیس دانشکده های فنی دانشگاه تهران

Received: 2015-12-30 Accepted : 2015-12-30 Published : 2010-09-23

Keywords: Corrosion Rate, Polarization Test, nanocrystalline coatings, Nickel-Cobalt,

Abstract :

In the present study, nanocrystalline Nickel-Cobalt coating was electrodeposited by pulse current from a Watts bath. Electrodeposition was carried out in the current densities of 2, 4, 6 A/dm² at different frequencies and on-time periods in the baths containing of 0.5, 1, 3 g/l saccharin. Morphology, analysis and crystallography of the coating were studied by means of SEM, EDS and XRD methods, respectively. The grain size of the coating was also calculated from XRD patterns using Scherrer equation. The results of polarization tests carried out in 3.5% NaCl solution indicated that by increasing the cobalt content in the coating, although the corrosion potential slightly shifted to more negative values, but the corrosion rate decreased, which can be related to more activity of cobalt with respect to nickel. A decrease in grain size of the coating increased the corrosion rate and shifted the corrosion potential to more positive values.

References:

1- Qiao, G., Jing, T., Wang, N., Y. Gao, Zhao, X., Zhou, J., and Wang, W., 2005. High-Speed Jet Electro Deposition and Microstructure of Nanocrystalline Ni-Co alloys. Electrochimica Acta. 51:85–92.

2- Karimpor, A., 2001. Mechanical Properties of  Bulk Nanocrystalline Hexagonal Cobalt Electrodeposits.  M.S. Thrsis, Toronto University, Department of Materials Science and Engineering.

3-Handbook of Deposition Technologies for Films and Coatings. second edition, University of California at Los Angeles, 1994.

4- Kim, S. H., 2004. Corrosion properties of Nanocrystalline Ni and Co electrodeposits. PhD Thesis, University of Toronto.