Assessment of the Impacts of Increasing Cavity Depth and Floor Numbers on Energy Performance of Different Types of Double Skin Facade in Office Buildings of Cold Climate in 36 Different Scenarios (Case Study: An Office Building in Tabriz)

Subject Areas : Architecture and urbanism

Shirin Nourivand ¹ , Lida Balilan ² , Lida Balilan ³ , Maziar Asefi ⁴

1 - Ph.D. Candidate, Department of Art & Architecture, Tabriz Branch, Islamic Azad University, Tabriz, Iran.
2 - Association Professor, Department of Art & Architecture, Tabriz Branch, Islamic Azad University, Tabriz, Iran. *(Corresponding Author)
3 - Association Professor, Department of Art & Architecture, Tabriz Branch, Islamic Azad University, Tabriz, Iran.
4 - Association Professor, Department of Architecture, Tabriz, Islamic Art University, Tabriz, Iran.

Received: 2020-07-07 Accepted : 2021-02-21 Published : 2021-09-23

Keywords: Double skin façade, Energy performance, Environment, Simulation,

Abstract :

Background and Objective: As a result of the rising awareness of environmental issues and the increase in the cost of energy, building professionals increasingly have to consider the sustainability and energy performance of their designs by using building energy performance simulation tools. The aim of the current study is to optimize energy consumption of office buildings in cold climate of Tabriz and providing optimal model of double skin façade (DSF) in this climate.Material and Methodology:  The research method in this paper is based on causal research and simulation. The research tool in this paper is Design Builder software. The energy performance of DSF is studied in 36 scenarios under 4 types of DSFs in an office building in cold climate of Tabriz in three cavity depths of 0/7, 1 and 1/3m in three modes: 5,10 and 15-story to achieve minimum energy consumption.Findings: The results indicate that, the 5-story box window type with a depth of 1/3m has a minimum electricity consumption and the 15-story multi-story type with a depth of 0/7m has a minimum gas consumption. In a fixed cavity depth, electricity consumption will increase and gas consumption will decrease by increasing the numbers of floors. Electricity consumption also increases with the increase of cavity depth. The 15-story multi-story DSF with a cavity depth of 1m has the lowest total energy consumption and the 5-story corridor DSF with a cavity depth of 0/7m has the highest total energy consumption.Discussion and Conclusion: Due to the high heating needs of the cold climate and energy efficiency of DSF facades, it is necessary to choose the appropriate type for this region.

References:

1. Cho, S., Na, S., 2017. The reduction of co2 emissions by application of high-strength reinforcing bars to three different structural systems in South Korea, Sustainability, 9(9):1.


2. https://www.iea.org/data-and-statistics?country=IRAN&fuel=CO2%20emissions&indicator= CO2 %20emissions%20by%20sector.


3. Avazalipour, Sh., Taghizadeh, Y., Zabihi, H. 2019. Designing a native pattern in arid climate to reduce energy consumption in housing sector (Case study: Yazd), Journal of Environmental Science and Technology (JEST), 3(21):236. (In Persian)


4. http://www.moe.gov.ir/


5. Bahadorinehad, M., Yaghubi, M. 2011. Natural ventilation and cooling in traditional Iranian buildings, University Publication Center, Tehran. (In Persian)


6. Panas, A. Pantouvakis, J. P., 2010. Evaluating research methodology in construction productivity studies, The Built & Human Environment Review J, 3(1): 70.


7. Nasrollahi, F., 2010. Window area in office buildings from the viewpoint of energy efficiency, Berlin University of technology, Building technology and design, Young cities, Germany.


8. Radhia, H., Sharples, S., Fikiry, F.,2013. Will multi-facade systems reduce cooling energy in fully glazed buildings? A scoping study of UAE buildings; Energy and Buildings, (56): 179–188.


9. Groat, L., Wang, D., 2002. Architectural Research methods. John Wiley & Sons.


10. Hadianpour, M., Zarkash, A., Mahdavinezhad, M. 2014. How to use double skin facade symbols in order to make optimal use of energy in buildings, Daneshnema, Specialized technical journal of Isfahan Province Building Engineering System Organization, Special issue: Building facilities and energy consumption optimization, 23(3). (In Persian)


11. Loncour, X., Deneyer, A., Blasco, M., Flamant, G., Wouters, P.,2004. Ventilated Double Façades, Classification & Illustration of Façade Concepts, Belgian, Building Research Institute.


12. Dooley, K., 2002. Simulation research methods, Baum, J (ed.), Companion to Organizations, Blackwell, London, pp. 829-830.


13. Gasparia, J. Fabbrib, K. Cancellaric, T. Corazzic, G, and Vodolac, V., 2017. Building Simulation & ICT, The use of building performance simulation to support architectural design, CISBAT International Conference Future Buildings & Districts Energy Efficiency from Nano to Urban Scale, La, Switzerland.