The Influence of Boron Additions on Microstructure and Dry Sliding Wear of Cast FeAl-Based Alloys

Subject Areas : Journal of Environmental Friendly Materials

M Paryab ¹ , M Ghanbari Haghighi ²

1 - Mining and Metallurgical Engineering Department, Amirkabir University, Tehran, Iran
2 - Advanced Materials Engineering Research Center, Karaj Branch, Islamic Azad University, Karaj, Iran

Received: 2021-09-02 Accepted : 2021-12-10 Published : 2021-12-01

Keywords: Microstructure, Casting, Wear Properties, Iron Aluminide- FeAl, Boron Content,

References:

[1] Z. Zhang and W. Liu, Mater. Sci. Eng., A, 423, (2006), 343. 

[2]  J. Wang, , J. Xing, Z. Qiu, X. Zhi and L. Cao, J. Alloys Compd., 488, (2009), 117.

[3] K. Han, I. Ohnuma and R. Kainuma, J. Alloys Compd., 668, (2016), 97.

[4] G. Sauthoff, Intermetallics, VCH Verlagsgesellschaft,  Weinheim, 1995.  

[5] W. C. Luu amd J. K. Wu, Mater. Chem. and Phys., 70, (2001), 236.

[6] J. H. Westbrook and R. L. Fleischer, Intermetallic Compounds, Chichester, John Wiley & Sons Ltd, 2. (1994), 199.

[7] D. D. Risanti and G. Sauthoff, Intermetallics, 19, (2011), 1727.

[8] D. G. Morris and M. A. Muñoz-Morris, Mater. Sci. Eng., A, 462, (2007), 45.

[9] M. Palm, Intermetallics, 13, (2005), 1286.

[10] R. Krein, A. Schneider, G. Sauthoff and G. Frommeyer, Intermetallics, (2007), 15, 1172.

[11] P. Kratochvíl, P.  Kejzlarb, R.  Krála and V. Vodicková, Intermetallics, 20, (2012), 39.

[12] P. Kratochvíl, F. Dobeš, J.  Pešička, P.  Málek, J.  Buršík, V.  Vodičková and P.  Hanus, Mater. Sci. Eng. A, 548, (2012), 175.

[13] X. Li, P. Prokopčáková and M.  Palm, Micro. Mater. Sci. Eng., A, 611, (2014), 234.

[14] F. Stein, M. Palm and G. Sauthoff,  Intermetallics, 13, (2005), 1275.

[15] P. Kratochvíl, P. Málek, M. Cieslar, P. Hanus, J. Hakl and T. Vlasák, Intermetallics, 15, (2007), 333.                                                                                                     

[16] A. Wasilkowska, M.  Bartsch, F. Stein, M. Palm, K. Sztwiertnia, G. Sauthoff and U. Messerschmidt, Mater. Sci. Eng., A, 380, (2004), 9.

[17] P. Lejček and A. Fraczkiewicz, Intermetallics, 11, (2003), 1053.

[18] J. W. Cohron, Y. Lin, R. H. Zee and E. P. George, Acta Mater., 46, (1998), 6245.

[19] F. Stein, A. Schneider and G. Frommeyer, Intermetallics, 11, (2003), 71.

[20] D. A. Alven and N. S.  Stoloff, Mater. Sci. Eng., A, (1997), 239-240, 362-368.

[21] D. A. Alven and N. S. Stoloff, Scr. Mater., 34, 1996, 1937.

[22] Y. D. Huang, W. Y. Yang and Z. Q. Sun, Intermetallics, 9, (2001), 119.

[23] L. Anthonya and B. Fultz, Acta Metall. Mater., (1995), 43, 3885.

[24] D. G. Morris and M. A. Muñoz-Morris, Intermetallics, 13, 2005, 1269.

[25] H. Xiao and I. Baker, Scr. Metall. Mater., 28, (1993), 1411.

[26] J. T. Guo, O.  Jin, W. M. Yin and T. M. Wang, Scr. Metall. Mater. (1993), 29, 783.

[27] K. Yoshimi, S. Hanada and M. H. Yoo, Acta Metall. Mater., (1995), 43, 4141.

[28] M. Zamanzade and A. Barnoush, Proc. Mater. Sci., (2014), 3, 2016.

[29] M. A.  Martin, J. A. Fenske, S. L.  Liu, P. Sofronis and I. M.  Robertson, Acta Mater.,(2011), 59, 1601.