Behavior Analysis of Cold Expanded-Bolt Clamped AL2024-T3 Plate

Subject Areas : Mechanical Engineering

M. Sayah Badkhor ¹ , A. R. Naddaf Oskouei* ² , H. Mohammadi Hooyeh ³ , F. Shirbakht ⁴

1 - Department of Engineering, University of Eyvanekey, Iran
2 - Department of Engineering, University of Eyvanekey, Iran
3 - Department of Engineering, University of Eyvanekey, Iran
4 - Department of Engineering, University of Eyvanekey, Iran

Received: 2017-01-05 Accepted : 2017-03-08 Published : 2017-08-24

Keywords:

References:

[1]       Ball, D. L., Lowry, D. R., “Experimental Investigation on the Effects of Cold Expansion of Fastener Holes”, Fatigue & Fracture of Engineering Materials & Structures, Vol. 21, 1998, pp. 17-34.

[2]       Chakherlou, T. N., Vogwell, J., “The Effect of Cold Expansion on Improving the Fatigue Life of Fastener Holes”, Engineering Failure Analysis, Vol. 10, 2003, pp. 13-24.

[3]       Zhang, Y., Fitzpatrick, M. E., and Edwards, L., “Analysis of the Residual Stress around a Cold-expanded Fastener Hole in a Finite Plate”, Strain, Vol. 41, 2005, pp. 59-70.

[4]       Nadai, A., “Theory of the Expanding of Boiler and Condenser Tube Joints Through Rolling”, Trans. ASME, Vol. 65, 1943, pp. 865-880.

[5]       Hsu, Y. C., Forman, R. G., “Elastic-Plastic Analysis of an Infinite Sheet Having a Circular Hole Under Pressure”, Journal of Applied Mechanics, Vol. 42, 1975, pp. 347-352.

[6]       Rich, D., Impellizzeri, L., “Fatigue Analysis of cold-Worked and Interference Fit Fastener Holes”, Cyclic Stress-strain and Plastic Deformation Aspects of Fatigue Crack Growth, ASTM International, 1977.

[7]       Guo, W., “Elastic-Plastic Analysis of a Finite Sheet with a Cold-Worked Hole”, Engineering Fracture Mechanics, Vol. 46, 1993, pp. 465-472.

[8]       Chakherlou, T. N., Shakouri, M., Akbari, A., and Aghdam, A. B., “Effect of Cold Expansion and Bolt Clamping on Fretting Fatigue Behavior of Al 2024-T3 in Double Shear Lap Joints”, Engineering Failure Analysis, Vol. 25, 2012, pp. 29-41.

[9]       Naddaf, O. A., Elhami, M. R., and Karami, F. I., “Analytical Investigation of Rupture Phenomena in Sheet Hydro-forming Process by Hemispherical Punch”, International Journal of Advanced Design and Manufacturing Technology, Vol 7, No 3, 2014, pp 37-43.

[10]    Gao, X-L., “Strain Gradient Plasticity Solution for an Internally Pressurized Thick-walled Spherical Shell of an Elastic–plastic Material”, Mechanics Research Communications 30, Vol. 5,  2003, pp. 411-420.

[11]    Mendelson, A., “Plasticity theory and application”, The Macmillan Company, New York, 1968, Chaps. 7.

[12]    Gao, X. L., “An Exact Elasto-Plastic Solution for an Open-Ended Thick-Walled Cylinder of a Strain-Hardening Material”, International Journal of Pressure Vessels and Piping, Vol. 52, 1992, pp. 129-144.

[13]    Gao, X. L., “Analytical Solution of a Borehole Problem Using Strain Gradient Plasticity”, Journal of Engineering Materials and Technology, Vol. 124, 2002, pp. 365-370.

[14]    Gao, X. L., Rowlands, R. E., “Analytical Solution for the Plane Strain Inclusion Problem of an Elastic Power-Law Hardening Matrix Containing an Elastic Cylindrical Inclusion”, International Journal of Pressure Vessels and Piping, Vol. 76, 1999, pp. 291-297.

[15]    Budynas, R., Nisbett, J., “Mechanical Engineering Design”, Eighth ed., McGraw-Hill Primis, New York, 2006, Chaps. 3.

[16]    O'Brien, E. W., “Beneficial Residual Stress from the Cold Expansion of Large Holes in Thick Light Alloy Plate”, The Journal of Strain Analysis for Engineering Design, Vol. 35, 2000, pp. 261-276.

[17]    Stephens, R. I., Fatemi, A., Stephens, R. R., and Fuchs, H. O., “Metal Fatigue in Engineering”, 2nd ed., John Wiley & Sons, New York, 2000, Chaps. 10. 

[18]    Tamarin, Y., “Atlas of Stress Strain Curves”, Second ed., ASM International, 2002, pp 319-331-332.