Developing a control strategy for AFM nano- micro manipulation
Subject Areas : Mechanical EngineeringH. RaeisiFard 1 , A. K. Hoshiar 2
1 - Faculty of Industrial and Mechanical Engineering,
Islamic Azad University, Qazvin Branch, Qazvin, Iran
2 - Faculty of Industrial and Mechanical Engineering,
Islamic Azad University, Qazvin Branch, Qazvin, Iran
Keywords:
Abstract :
[1] Stroscio, J. A, Eigler, D. M., “Atomic and Molecular Manipulation with the Scanning Tunneling Microscope”, Science, Vol. 254, No. 5036, 1996, pp. 1322-1326.
[2] Schaefer, D. M, Reifenberger, R., “Fabrication of two-dimensional of Nanometer –size clusters with the atomic force microscope”, Applied Physics Letters, Vol. 66, No. 8, 1995, pp. 1012-1014.
[3] Junno, T., Deppert, K., and Montelius, L., “Controlled Manipulation of Nanoparticles with an Atomic Force Microscope”, Applied Physics Letters, Vol. 66, No. 3627, 1995, pp. 3627-3629.
[4] Sitti, M., Hashimoti, H., “Controlled Pushing of Nanoparticles: Modeling and Experiments”, IEEE/ASME Transaction On Mechatronics, Vol. 5, No. 2, 2000, pp. 199-211.
[5] Sitti, M., “Survey of Nanomanipulation Systems”, IEEE Nanotechnology Conference, Maui, 2001, pp. 75 - 80.
[6] Tafazzoli, A., Sitti, M., “Dynamic behavior and simulation of Nanoparticle sliding during Nanoprobe based positioning”, ASME International Mechanical Engineering Congress, California, 2004, pp. 965-972.
[7] Korayem, M. H., Hoshiar, A. K, “Modeling and simulation of dynamic modes in the manipulation of nanorods, Micro & Nano letters”, Vol. 8, No. 6, 2013, pp. 284-287.
[8] Korayem, M. H., Hoshiar, A. K., “Dynamic 3D modeling and simulation of nanoparticles manipulation using an AFM nanorobot”, Robotica, Vol. 32, No. 4, 2014, pp. 625–641.
[9] Li, G., Xi, N., Chen, H., Saeed, A., and Yu, M., “Assembly of nanostructure using AFM based nanomanipulation system”, International Conference on Robotics and Automation (ICRA), Shanghai, Vol. 1, 2011, pp. 428-433.
[10] Hou, J., Liu, L., Wang, Z., Wang, Z., Xi, N., Wang, Y., Wu, C., Dong, Z., and Yuan, S., “AFM-Based robotic nano-hand for stable manipulation at nanoscale”, Transaction on automation science and engineering, Vol. 10, No.2, 2013, pp. 285-295.
[11] Sri Muthu Mrinalini, R., Sriramshankar, R., and Jayanth, G. R., “Direct Measurement of Three-Dimensional Forces in Atomic Force Microscopy”, IEEE/ASME Transaction on mechatronics, Vol. PP, No. 99, 2014, pp. 4674-4679.
[12] Falvo, M. R, Clary, G, Hesler, A., and Paulson, S., “Nanomanipulation experiments exploring friction and mechanical properties of carbon Nanotube”, Micros Microanal, Vol. 4, No. 5, 1999, pp. 504-512.
[13] Jiangbo, Z., Guangyong, L., and Xi, N., “Modeling and Control of Active End Effectors for the AFM Based Nano Robotic Manipulators”, International Conference on Robotics and Automation IEEE, Barcelona, 2005, pp. 163-168.
[14] Lianqing, L., Xi, N., Yilun, L., Jiangbo, Z., and Guangyong, L., “Real-time Position Error Detecting in Nanomanipulation Using Kalman Filter”, Proceedings of the 7th IEEE International Conference on Nanotechnology, Hong Kong, 2007, pp. 100-105.
[15] Lianqing, L., Peng, Y., Xiaojun, T., Yuechao, W., Zaili, D., and Xi, N., “Force Analysis of Top-Down Forming CNT Electrical Connection Using Nanomanipulation Robot”, IEEE International Conference on Mechatronics and Automation, Luoyang, 2006, pp. 113-117.
[16] Wang, Zh., Liu, L., Hou, Ji., Wang, Zh., Yuan, Sh, and Dong, Z., “Virtual nano-hand: A stable pushing strategy in AFM based sensorless nanomanipulation”, IEEE International Conference on Robotics and Biomimetics (ROBIO), Phuket, 2011, pp. 1409–1414.
[17] Fang, Y., Zhang, Y, Qi, N., and Dong, Xi., “AM-AFM System Analysis and Output Feedback Control Design With Sensor Saturation”, IEEE Transactions on Nanotechnology, Vol. 12, No. 2, 2013, pp. 190-202.
[18] Polyakov, B., Vlassov, S., Dorogin, L.M., Butikova, J., Antsov, M., Oras, S., Lõhmus, R., and Kink, I., “Manipulation of nanoparticles of different shapes inside a scanning electron microscope”, Beilstein Journal of Nanotechnology, Vol. 5, 2014, pp. 133–140.
[19] Kumar, S., Das, M., Singh, R. P., Datir, S., Chauhan, D. S., and Jain, S., “Mathematical models for the oxidative functionalization of multiwalled carbon nanotubes”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 419, 2013, pp. 156-165.
[20] Sun, Z., Song, B., Xi, N., Yang, R., Hao, L., and Chen, L., “Scan range adaptive hysteresis/creep hybrid compensator for AFM based nanomanipulations”, American Control Conference, Portland 2014, pp. 1619–1624.
[21] Zhao, J., Song, B., Xi, N., “Non-vector space stochastic control for nano robotic manipulations”, IEEE/RSJ International Conference on Intelligent Robots and Systems, Chicago, 2014, pp. 852–857.
[22] Amari, N., Folio, D., and Ferreira, A., “Robust Nanomanipulation Control based on Laser Beam Feedback”, IEEE/RSJ International Conference on Intelligent Robots and Systems, Chicago, 2014, pp. 4674–4679.
[23] Korayem, M. H., Hoshiar, A. K., and Kordi, F., “Dynamic Modeling and Simulation of Cylindrical Nanoparticles in Liquid Medium” International Journal of Advanced Manufacture Technology, 2014, Vol. 75, pp. 197-208.
[24] Korayem, A. H., Hoshiar, A. K., Ashtiani, N. N., and Korayem, M. H., “Using a Virtual Reality Environment to Simulate the Pushing of Cylindrical Nanoparticles” International Journal of Nanoscience Nanotechnology, 2014, Vol. 10, pp. 133-144.
[25] Korayem, A. H., Hoshiar, A. K., and Korayem, M. H., “Modeling and simulation of critical forces in the manipulation of cylindrical nanoparticles”, International Journal of Advanced Manufacture Technology, 2015, Vol. 79, pp. 1505-1517.
