Evaluation of S/N Diagram in Welded Joints Based on Different Fatigue Failure Criteria

Subject Areas : stress analysis

Saeed Jouzdani ¹ , Ali Heidari ²

1 - Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr/Isfahan, Iran
2 - Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr/Isfahan, Iran

Received: 2019-12-13 Accepted : 2020-05-18 Published : 2020-09-01

Keywords:

References:

[1]     Marin, T., Nicoletto, G., Fatigue Design of Welded Joints using the Finite Element Method and the 2007 Asme Div. 2 Master Curve, Fracture and Structural Integrity, Vol. 3, No. 9, 2009, pp. 76–84.

[2]     Carpinteri, A., Spagnoli, A., and Vantadori, S., Multiaxial Fatigue Life Estimation in Welded Joints Using the Critical Plane Approach, International Journal of Fatigue, Vol. 31, No. 1, 2009, pp. 188–196.

[3]     Livieri, P., Lazzarin, P., Fatigue Strength of Steel and Aluminum Welded Joints Based on Generalized Stress Intensity Factors and Local Strain Energy Values, International Journal of Fracture, Vol. 133,No. 3, 2005, pp. 247–276.

[4]     Maddox, S. J., Fatigue Strength of Welded Structures: Woodhead publishing, 1991.

[5]     Kong, F., Ma, J., and Kovacevic, R., Numerical and Experimental Study of Thermally Induced Residual Stress in the Hybrid Laser–GMA Welding Process, Journal of Materials Processing Technology, Vol. 211, No. 6, 2011, pp. 1102–1111.

[6]     Chang, P. H., Teng, T. L., Numerical and Experimental Investigations On the Residual Stresses of The Butt-Welded Joints, Computational Materials Science, Vol. 29, No. 4, 2004, pp. 511–522.

[7]     Messler, R. W., Principles of Welding: Processes, Physics, Chemistry, and Metallurgy: John Wiley & Sons, 2008.

[8]     Asadi, M., Goldak, J. A., Nielsen, J., Zhou, J., Tchernov, S., and Downey, D., Analysis of Predicted Residual Stress in a Weld and Comparison with Experimental Data Using Regression Model, Int J Mech Mater Des, No. 5, 2009, pp. 353–364.

[9]     Bruder, T., Störzel, K., Baumgartner, J., and Hanselka, H., Evaluation of Nominal and Local Stress Based Approaches for the Fatigue Assessment of Seam Welds, International Journal of Fatigue, Vol. 34, No. 1, 2012, pp. 86-102.

[10]  Bokesjö, M., Al-Emrani, M., and Svensson, T., Fatigue Strength of Fillet Welds Subjected to Multi-Axial Stresses, International Journal of Fatigue, Vol. 44, 2012, pp. 21–31.

[11]  BS7608, Code of Practice for Fatigue Design aand Assessment of Steel Structures: British Standards Institution, 1993.

[12]  Hobbacher, A., Recommendations for Fatigue Design of Welded Joints and Components: OH: Welding Research Council Shaker Heights, 2009.

[13]  Sonsino, C. M., Overview of the State of the Art On Multiaxial Fatigue of Welds, European Structural Integrity Society, Vol. 25, 1999, pp. 195–217.

[14]  Sonsino, C. M., Multiaxial Fatigue Assessment of Welded Joints–Recommendations for Design Codes, International Journal of Fatigue, Vol. 31, No. 1, 2009, pp. 173–187.

[15]  Bae, D., Sohn, I., and Hong, J., Assessing the Effects of Residual Stresses On the Fatigue Strength of Spot Welds, Welding Journal, Vol. 82, 2003, pp. 18–23.

[16]  Krasovsky, S., Sonnichsen, S., and Bachmann, D., On the Residual Stresses in Multi- Pass Welds: Coupling of Welding Simulation and Fatigue Analysis, Procedia Engineering, Vol. 10, 2011, pp. 506- 511.

[17]  Socie, D., Marquis, G., Multiaxial Fatigue: Warrendale, Society of Automotive Engineers Inc, 2000.

[18]  Vasantharaja, P., Maduraimuthu, V., Vasudevan, M., and Palanichamy, P., Assessment of Residual Stresses and Distortion in Stainless Steel Weld Joints, Materials and Manufacturing Processes, Vol. 27, No. 12, 2012, pp. 1376– 1381.

[19]  Yuguang, C., Zhanbin, M., Shihua, Z., and Haiqing, T., FEM Study On the Stress Concentrationfactors of K-Joints with Welding Residual Stress, Applied Ocean Research, Vol. 43, 2013, pp. 195–205.

[20]  Ganesh, K., Vasudevan, M., Balasubramanian, K., Chandrasekhar, N., and Vasantharaja, P., Thermo-Mechanical Analysis of TIG Welding of AISI 316 LN Stainless Steel, Materials and Manufacturing Processes, Vol. 29, No. 8, 2014, pp. 903– 909.

[21]  Vasantharaja, P., Vasudevan, M., and Palanichamy, P., Effect of Welding Processes On the Residual Stress and Distortion in Type 316LN Stainless Steel Weld Joints, Journal of Manufacturing Processes, Vol. 19, 2014, pp. 187- 193.

[22]  Bhatti, A. A., Barsoum, Z., Murakawa, H., and Barsoum, I., Influence of Thermo-Mechanical Material Properties of Different Steel Grades On Welding Residual Stresses and Angular Distortion, Materials and Design, Vol. 65, 2015, pp. 878–889.

[23]  Lopez-Jauregi, A., Esnaola, J. A., Ulacia, I., Urrutibeascoa, I., and Madariaga, A., Fatigue Analysis of Multipass Welded Joints Considering Residual Stresses, International Journal of Fatigue, Vol. 79, 2015, pp. 75- 85.

[24]  Lopez-Jauregi, A., Ulacia, I., Esnaola, J. A., Ugarte, D., and Torca, I., Procedure to Predict Residual Stress Pattern in Spray Transfer Multipass Welding, the International Journal of Advanced Manufacturing Technology, Vol. 76, No. 9-12, 2014, pp. 2117-2129.

[25]  Wang, D., Zhang, H., Gong, B., and Deng, C., Residual Stress Effects On Fatigue Behaviour of Welded T-Joint: A Finite Fracture Mechanics Approach, Materials and Design, Vol. 91, 2016, pp. 211- 217.

[26]  Forouzan, M. R., Heidari, A., and Golestaneh, S. J., FE Simulation of Submerged arc Welding of API 5L-X70 Straight Seam Oil and Gas Pipes, Journal of Computational Methods in Engineering (ESTEGHLAL), Vol. 28, No. 1, 2009, pp. 93-110.

[27]  Forouzan, M. R., MirfalahNasiri, S. M., Mokhtari, A., Heidari, A., and Golestaneh, S. J., Residual Stress Prediction in Submerged arc Welded Spiral Pipes, Materials & Design, Vol. 33, 2012, pp. 384-394.