A Novel Approach for Optimization of Vehicle Noise Insulators

Subject Areas : Mechanical Engineering

S.Hamed Tabatabaei ¹ , Saeed Moradi Haghighi ² , Kasra Ghasemian ³ , Amir Hossein Kiani ⁴

1 - Department of Mechanical Engineering, Islamic Azad University, South Tehran Branch, Iran
2 - Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran
3 - Department of Mechanical Engineering, University of Science and Technology, Tehran, Iran
4 - Department of Mechanical Engineering, University of Science and Technology, Tehran, Iran

Received: 2019-11-29 Accepted : 2020-04-07 Published : 2020-09-01

Keywords:

References:

[1]     Pang, J., Noise and Vibration Control in Automotive Bodies, First ed, John Wiley & Sons, Inc., Hoboken, New Jersey, 2018, pp. 217.

[2]     Duval, A., Rondeau, J. F., Bischoff, L., Deshayes, G., and Dejaeger, L., Generalized Lightweight Concepts: Improving the Acoustic Performance of Less than 2500 g/m2 Insulators, SAE Technical Paper No. 2009-01-2136, 2009.

[3]     Zhang, J., Zhu, G., Zhang, X., Liu, H., and Liu, C., The Vehicle NVH Development and Engineering Application of the Lightweight Sound Package, in Proceedings of SAE-China Congress 2014: Selected Papers, 2015, pp. 291-300.

[4]     Li, C., Cazzolato, B., and Zander, A., Acoustic Impedance of Micro Perforated Membranes: Velocity Continuity Condition at the Perforation Boundary, The Journal of the Acoustical Society of America, Vol. 139, No. 1, 2016, pp. 93-103.

[5]     Shin, H., Bolton, J. S., The Identification of Minimum-Weight Sound Packages, Noise Control Engineering Journal, Vol. 66, No. 6, 2018, pp. 523-540.

[6]     Parrett, A. V.,et al., Application of Micro-Perforated Composite Acoustic Material to a Vehicle Dash Mat, SAE Technical Paper No.2011-0148-7191, 2011.

[7]     Li, L., Gang, X., Liu, Y., Zhang, X., and Zhang, F., Numerical Simulations and Experiments on Thermal Viscous Power Dissipation of Perforated Plates, AIP Advances, Vol. 8, No. 10, 2018, pp. 105-221.

[8]     Liu, Z., Zhan, J., Fard, M., and Davy, J. L., Acoustic Measurement of a 3d Printed Micro-Perforated Panel Combined with a Porous Material, Measurement, Vol. 104, 2017, pp. 233-236.

[9]     Du, A. M., Wei, N., and Shao, J. W., Optimization of Sound Package for Automotive Dash Panel, Applied Mechanics and Materials 2014 (Vol. 670, pp. 1098-1101). Trans Tech Publications Ltd.

[10]  Seppi, M., Castagnetti, C., and Ravinath, V., Optimisation of a Hybrid Sound Package with Statistical Energy Analysis, ATZ Worldwide 114, No. 9, 2012, pp. 44-48.

[11]  Jain, S., Shravage, P., Joshi, M., and Karanth, N., Acoustical design of Vehicle Dash Insulator, SAE Technical Paper No. 2011-0148-7191, 2011.

[12]  Jain, S., Shravage, P., and Karanth, N., Sound Package Materials for Vehicle Interior NVH Refinement, Automotive Material Conference,  2010.

[13]  Marzbanrad, J., Hafezian, M., and Mozaffarikhah, M., Automotive Interior Cabin Noise Analysis and Optimization Using SEA and RSM, International Journal of Automotive Engineering, Vol. 9, No. 1, 2019, pp. 2887-2894.

[14]  Heutschi, K., Lecture Notes on Acoustics I, Institute for Signal- and Informationprocessing, ISI Swiss Federal Institute of Technology, Zurich, Swiss, 2013, chaps. 1.

[15]  Allard, J., Atalla, N., Propagation of Sound in Porous Media: Modelling Sound Absorbing Materials, 2^nd edition, John Wiley & Sons, Hoboken, New Jersey, 2009, pp. 2-3.

[16]  Chevillotte, F., Jaouen, L., and Bécot, F. X., On the Modeling of Visco-Thermal Dissipations in Heterogeneous Porous Media, The Journal of the Acoustical Society of America, Vol. 138, No. 6, 2015, pp. 3922-3929.

[17]  Liu, Z., Zhan, J., Fard, M., and Davy, J. L., Acoustic Properties of Multilayer Sound Absorbers with a 3D Printed Micro-Perforated Panel, Applied Acoustics, Vol. 121, 2017, pp. 25-32.

[18]  Zwikker, C., Kosten, C. W., Sound Absorbing Materials, Elsevier Publishing Company, Amsterdam, 1949.

[19]  Villamil, H. R., Acoustic Properties of Microperforated Panels and Their Optimization by Simulated Annealing, Ph. D. Dissertation, Universidad Politecnica de Madrid, Madrid, Spain, 2012.

[20]  Dah-You, M., General Theory and Design of Microperforated-Panel Absorbers, Chinese Journal,No. 3, 1997, pp. 03.

[21]  Lee, D., Kwon, Y., Estimation of the Absorption Performance of Multiple Layer Perforated Panel Systems by Transfer Matrix Method, Journal of Sound and Vibration, Vol. 278, No. 4-5, 2004, pp. 847-86.

[22]  Liu, Z., Zhan, J., Fard, M., and Davy, J. L., Acoustic Measurement of a 3D Printed Micro-Perforated Panel Combined with a Porous Material, Measurement, Vol. 104, 2017, pp. 233-236.

[23]  Musser, C. T., Manning, J. E., and Peng, G. C., Predicting Vehicle Interior Sound with Statistical Energy Analysis, Sound & Vibration, Vol. 46, No. 12, 2012, pp. 8-14.

[24]  Egab, L., Wang, X., Fard, M., and Jazar, R., Prediction of Interior Trim Sound Absorption Using Statistical Energy Analysis, 25th International Conference on Noise and Vibration engineering, Vol. 5, 2012, pp. 3881-3890.

[25]  Golota, A., Acoustic Simulation of Power Unit Encapsulation for Construction and Mining Applications, Master's Thesis, chalmers university of technology, Gothenburg, Sweden, 2012.

[26]  Pan, J., Semeniuk, B., Ahlquist, J., and Caprioli, D., Optimal Sound Package Design Using Statistical Energy Analysis, SAE Technical Paper No, 0148-7191, 2003.

[27]  Yu ,Z., Raveendra, S.  T., Mo, H., and Mollo, C., Development of General SEA Templates for Four-Door Passenger Cars, SAE Transactions, 2003, pp. 1860-1870

[28]  Edathute, S., Nalla, T., Bhangale, R., and Kumbhar, M., Application of Dual Density Light Weight Dash Acoustic Insulators in SUVs, SAE Technical Paper No. 0148-7191, 2009.