Numerical Analysis of The Crater Diameter and Penetration Depth of The Target Due to The Impact of Short-Rod Segmented Projectiles at High Velocity

Subject Areas : Mechanical Engineering

Behnam Yasemi ¹ , Hamid Soleimanimehr ² , Hossein Khodarahmi ³ , sadegh rahmati ⁴ , Najmeh khazraiyan ⁵

1 - Department of mechanical engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
2 - Department of mechanical engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
3 - Department of Mechanical Engineering, Imam Hossein University, Tehran, Iran
4 - Faculty of Medical Sciences and Technologies, Science and Research Branch, Islamic Azad University, Tehran, Iran
5 - Engineering faculty, Islamshahr Branch, Islamic Azad University, Tehran, Iran

Received: 2022-03-10 Accepted : 2022-07-21 Published : 2022-09-01

Keywords:

References:

• Zukas, J. A., High Velocity Impact Dynamics, 1st ed, John Wiley&Sons, New York, 1990, pp. 431-433.


• Franzen, R. R., Walker, J. D., Orphal, D. L., and Anderson, C. E., An upper Limit for The Penetration Performance of Segmented Rods with Segment-L/D 1, International Journal of  Impact Engineering, Vol. 15, No. 5, 1994, pp. 661-668.


• Naz, P., Lehr, H., the Crater Formation Due to Segmented Rod Penetrators, International Journal of Impact Engineering, Vol. 10, 1990, pp. 413-425.


• Christman, D., Gehring, J., Analysis of High Velocity Projectile Penetration Mechanics, Journal of Applied Physics, Vol. 37,1966, pp. 1579-1587, DOI. 10.1063/1.1708570.


• Lee, M., Normandia, M. J., Successive Impact of Segmented Rods at High-Velocity, KSME International Journal, Vol. 13, No. 4, 1999, pp. 312-320.


• Holland, P. M., Gordon, J. T., Menna, T. L., and Charters, A. C., Hydrocode Results for The Penetration of Continuous, Segmented and Hybrid Rods Compared with Ballistic Experiments, International Journal of Impact Engineering, Vol. 10, 1990, pp. 241-250.


• Mchenry, M. R., Choo, Y., and Orphal, D. L., Numerical Simulations of Low L/D Rod Aluminum into Aluminum Impacts Compared to The Tate Cratering Model, International Journal of Impact Engineering, Vol. 23,1999, pp. 621-628.


• Lee, M., A Numerical Comparison of The Ballistic Performance of Unitary Rod and Segmented-Rods Against Stationary and Moving Oblique Plates, International Journal of Impact Engineering, Vol. 26, 2001, pp. 399-407.


• Aly, S., Li Q., Numerical Investigation of Penetration Performance of Non-Ideal Segmented-Rod Projectiles. Transactions of Tianjin University, Vol. 14, 2008, pp. 391-395, DOI 10.1007/s12209-008-0067-x.


• Wang, X., Zhao, G., High Velocity Impact of Segmented Rods with An Aluminum Carrier Tube, International Journal of Impact Engineering, Vol. 17, 1995, pp. 915-923.


• Hegde, G. S., Narasimha, Murthy H. N., and Krishna, M., The Analytical Study on The Optimal Ballistic Performance Using Interface Theory, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 41, 2010, pp. 112-123.


• Cao, Z. S., Deng, Y. F., and Zhang, W., Numerical Investigation of Penetration Performance of Segmented Rod Projectiles with Various Connectors, in Key Engineering Materials, Vol. 452-453, 2011, pp. 185-188, doi:10.4028/www.scientific.net/KEM.452-453.185.


• Presnell, M. B., Rajendran, A. M., A Computational Study of Segmented Tungsten Rod Penetration into A Thick Steel Target Plate at High Velocities, in AIP Conference Proceedings, 2012, American Institute of Physics, https://doi.org/10.1063/1.3686226.


• Zolfaghari, M., Miraghaie, V., A New Mathematical Model for The Penetration of Segmented Rod into Ceramic Semi-Infinite Target, Journal of Energetic Materials, 12, No. 1, 2017, pp. 55-67


• Arjangi, A., Soleimanimehr, H., and Mirzaei, M., Simulation of Rock Drilling Process Using Smoothed-Particle Hydrodynamics Method, Advanced Journal of Science and Engineering, Vol. 1, 2020, pp. 52-58, DOI: 10.22034/AJSE.2012052.


• Hedayati, E., Vahedi, M., Numerical Investigation of Penetration in Ceramic/Aluminum Targets Using Smoothed Particle Hydrodynamics Method and Presenting a Modified Analytical Model, Computer Modeling in Engineering & Sciences, Vol. 113, No. 3, 2017, pp. 295-323.


• Frissane, H., Taddei, L., Lebaal, N., and Roth, S., 3D Smooth Particle Hydrodynamics Modeling for High Velocity Penetrating Impact Using GPU: Application to a Blunt Projectile Penetrating Thin Steel Plates, Computer Methods in Applied Mechanics and Engineering, Vol. 357, 2019, https://doi.org/10.1016/j.cma.2019.112590.


• Giannaros, E., Kotzakolios, A., Kostopoulos, V., and Campoli, G., Hypervelocity Impact Response of CFRP Laminates Using Smoothed Particle Hydrodynamics Method: Implementation and Validation, International Journal of Impact Engineering, Vol. 123, 2019, pp. 56-69, https://doi.org/10.1016/j.ijimpeng.2018.09.016.


• Liu, M., Liu, G., Smoothed Particle Hydrodynamics (SPH): an Overview and Recent Developments, Archives of computational methods in engineering, Vol. 17, 2010, pp. 25-76, DOI. 10.1007/s11831-010-9040-7.


• Bonet, J., Lok, T. S. L., Variational and Momentum Preservation Aspects of Smooth Particle Hydrodynamic Formulations, Computer Methods in applied mechanics and engineering, Vol. 180, 1999, pp. 97-115, https://doi.org/10.1016/S0045-7825(99)00051-1.


• Biniyazan F, Soleimanimehr H., Improving both strength and ductility of Al-7075 by combining dual equal channel lateral extrusion with aging heat treatment, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Vol. 45, 2021, pp. 727-739,https://doi.org/10.1007/s40997-020-00416-y.