Investigating the Effect of Separation Speed and Image Cross-Section Geometry on The Separation Force in DLP Method using FEP and PP Polymer Membranes

Subject Areas : additive manufacturing

Siavash Moayedi Manizani ¹ , Jamal Zamani ² , Mohammad Salehi ³ , Mohammad Taghi shayesteh ⁴

1 - Department of Mechanical Engineering, University of KNTU, Iran
2 - Department of Mechanical Engineering, University of KNTU, Iran
3 - Department of Mechanical Engineering, University of KNTU, Iran
4 - Department of Mechanical Engineering, University of KNTU, Iran

Received: 2022-10-10 Accepted : 2023-02-21 Published : 2023-09-01

Keywords:

References:

• Ge, Q., Li, Z., Wang, Z., Kowsari, K., Zhang, W., He, X., and et al, Projection Micro Stereolithography Based 3d Printing and Its Applications, International Journal of Extreme Manufacturing, Vol. 2, No. 2, 2020, pp. 022004, DOI: https://doi.org/10.1088/2631-7990/ab8d9a.


• Zhang, B., Kowsari, K., Serjouei, A., Dunn, M. L., and Ge, Q., Reprocessable Thermosets for Sustainable Three-Dimensional Printing, Nature communications, Vol. 9, No. 1, 2018, pp. 1831, DOI: https://doi.org/10.1038/s41467-018-04292-8


• Choo, S., Jin, S., and Jung, J., Fabricating High-Resolution and High-Dimensional Microneedle Mold Through the Resolution Improvement of Stereolithography 3D printing, Pharmaceutics, Vol. 14, No. 4, 2022, pp. 766, DOI: https://doi.org/10.3390/pharmaceutics14040766.


• Hazeveld, A., Slater, J. J. H., and Ren, Y., Accuracy and Reproducibility of Dental Replica Models Reconstructed by Different Rapid Prototyping Techniques, American Journal of Orthodontics and Dentofacial Orthopedics, Vol. 145, No. 1, 2014, pp. 108-15, DOI: https://doi.org/10.1016/j.ajodo.2013.05.011.


• Kadry, H., Wadnap, S., Xu, C., and Ahsan, F., Digital Light Processing (DLP) 3D-Printing Technology and Photoreactive Polymers in Fabrication of Modified-Release Tablets, European Journal of Pharmaceutical Sciences, Vol. 135, 2019, pp. 60-7, DOI: https://doi.org/10.1016/j.ejps.2019.05.008.


• Razavi Bazaz, S., Rouhi, O., Raoufi, M. A., Ejeian, F., Asadnia, M., Jin, D., and et al., 3D Printing of Inertial Microfluidic Devices, Scientific Reports, Vol. 2, No. 1, 2020, pp. 5929. DOI: https://doi.org/10.1038/s41598-020-62569-9.


• Skoog, S. A., Goering, P. L., and Narayan, R. J. Stereolithography in Tissue Engineering, Journal of Materials Science: Materials in Medicine, Vol. 25, 2014, pp. 845-56, DOI: https://doi.org/10.1007/s10856-013-5107-y.


• Truxova, V., Safka, J., Seidl, M., Kovalenko, I., Volesky, L., and Ackermann, M., Ceramic 3D Printing: Comparison of SLA and DLP Technologies, MM Sci. J., Vol. 2020, pp. 3905-11, DOI: http://dx.doi.org/10.17973/MMSJ.2020_06_2020006.


• Stansbury, J. W., Idacavage, M. J., 3D Printing With Polymers: Challenges Among Expanding Options and Opportunities, Dental Materials, Vol. 32, No. 1, 2016, pp. 54-64, DOI: https://doi.org/10.1016/j.dental.2015.09.018.


• Lin, Y. S., Yang, C. J., Spring Assisting Mechanism for Enhancing The Separation Performance of Digital Light Process 3D Printers, IEEE Access, Vol. 7, 2019, pp. 71718-29, DOI: https://doi.org/10.1109/ACCESS.2019.2920004.


• Huang, Y. M., Jiang, C. P., On-Line Force Monitoring of Platform Ascending Rapid Prototyping System, Journal of Materials Processing Technology, Vol. 159, No. 2, 2005, pp. 257-64, DOI: https://doi.org/10.1016/j.jmatprotec.2004.05.015.


• Liravi, F., Das, S., Zhou, C., Editors, Separation Force Analysis Based on Cohesive Delamination Model for Bottom-Up Stereolithography Using Finite Element Analysis, 2014 International Solid Freeform Fabrication Symposium, University of Texas at Austin, 2014.


• Tijing, L. D., Dizon, J. R. C., Ibrahim, I., Nisay, A. R. N., Shon, H. K., and Advincula, R. C., 3D Printing for Membrane Separation, Desalination and Water Treatment, Applied Materials Today, Vol.18, 2020, 100486, DOI: https://doi.org/10.1016/j.apmt.2019.100486.


• Wu, X., Xu, C., and Zhang, Z., Flexible Film Separation Analysis of LCD Based Mask Stereolithography, Journal of Materials Processing Technology, Vol. 288, 2021, pp. 116916, DOI: https://doi.org/10.1016/j.jmatprotec.2020.116916.


• Ye, H., Venketeswaran, A., Das, S., and Zhou, C., Investigation of Separation Force for Constrained-Surface Stereolithography Process From Mechanics Perspective, Rapid Prototyping Journal, Vol. 23, No. 4, 2017, pp. 696-710, DOI: https://doi.org/10.1108/RPJ-06-2016-0091.


• Pan, Y., He, H., Xu, J., and Feinerman, A., Study of Separation Force in Constrained Surface Projection Stereolithography, Rapid Prototyping Journal, Vol. 23, No. 2, 2017, pp. 353-61, DOI: http://dx.doi.org/10.1108/RPJ-12-2015-0188.


• Wu, J., Guo, J., Linghu, C., Lu, Y., Song, J., Xie, T., and et al., Rapid Digital Light 3D Printing Enabled By a Soft and Deformable Hydrogel Separation interface, Nature Communications, Vol. 12, No. 1, 2021, pp. 6070, DOI: https://doi.org/10.1038/s41467-021-26386-6.


• Springer, S., UV and Visible Light Filtering Window Films, WAAC Newsletter, Vol. 30, No. 2, 2008, pp. 16-23, Electronic Publications.


• ETEC 2022, 3D Printers|Desktop, Professional and Industrial|EnvisionTEC, [online] Available at: <https://envisiontec.com/aria-desktop-3d-printer/> 2022.