Investigating the Effect of Joint Geometry of the Gas Tungsten Arc Welding Process on the Residual Stress and Distortion using the Finite Element Method
Subject Areas : Engineering
A Shiri
1
(Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Isfahan, Iran)
A Heidari
2
(Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Isfahan, Iran)
Keywords:
Abstract :
[1] Rajabi H., Heidari A., 2018, Analysis and presenting an optimum post weld heat treatment cycle to maximum reduction of residual stresses of electron beam welding, Journal of Mechanical Engineering and Vibration 9(2): 55-65.
[2] Zubairuddin M., Albert S. K., Vasudevan M., Mahadevan S., Chaudhari V., Suri V. K., 2017, Numerical simulation of multi-pass GTA welding of grade 91 steel, Journal of Manufacturing Processes 27: 87-97.
[3] Forouzan M.R., Mirfalah Nasiri S.M., Mokhtari A., Heidari A., Golestaneh S.J., 2012, Residual stress prediction in submerged arc welded spiral pipes, Materials & Design 33: 384-394.
[4] Portelette L., Roux J.-C., Robin V., Feulvarch E., 2017, A Gaussian surrogate model for residual stresses induced by orbital multi-pass TIG welding, Computers & Structures 183: 27-37.
[5] Chaudhary S., Sahu S.A., Singhal A., 2018, On secular equation of SH waves propagating in pre-stressed and rotating piezo-composite structure with imperfect interface, Journal of Intelligent Material Systems and Structures 29(10): 2223-2235.
[6] Cho S.H., Kim J.W., 2002, Analysis of residual stress in carbon steel weldment incorporating phase transformations, Science and Technology of Welding and Joining 7(4): 212-216.
[7] Chang P.-H., Teng T.-L., 2004, Numerical and experimental investigations on the residual stresses of the butt-welded joints, Computational Materials Science 29(4): 511-522.
[8] Yajiang L., Juan W., Maoai C., Xiaoqin S., 2004, Finite element analysis of residual stress in the welded zone of a high strength steel, Bulletin of Materials Science 27(2): 127-132.
[9] Vasudevan M., 2007, Computational and Experimental Studies on Arc Welded Austenitic Stainless Steel, Ph.D. Thesis, Indian Institute of Technology, Madras, India.
[10] Palanichamy P., Vasudevan M., Jayakumar T., 2009, Measurement of residual stresses in austenitic stainless steel weld joints using ultrasonic technique, Science and Technology of Welding and Joining 14(2): 166-171.
[11] Tseng K.-H., Hsu C.-Y., 2011, Performance of activated TIG process in austenitic stainless steel welds, Journal of Materials Processing Technology 211(3): 503-512.
[12] Ganesh K.C., Vasudevan M., Balasubramanian K.R., Chandrasekhar N., Mahadevan S., Vasantharaja P., Jayakumar T., 2014, Modeling, prediction and validation of thermal cycles, residual stresses and distortion in Type 316 LN stainless steel weld joint made by TIG welding process, Procedia Engineering 86: 767-774.
[13] Bhatti A.A., Barsoum Z., Murakawa H., Barsoum I., 2015, Influence of thermo-mechanical material properties of different steel grades on welding residual stresses and angular distortion, Materials & Design 65: 878-889.
[14] Vasantharaja P., Vasudevan M., Palanichamy P., 2015, Effect of welding processes on the residual stress and distortion in type 316LN stainless steel weld joints, Journal of Manufacturing Processes 19: 187-193.
[15] Varma Prasad V.M., Joy Varghese V.M., Suresh M.R., Siva Kumar D., 2016, 3D simulation of residual stress developed during TIG welding of stainless steel pipes, Procedia Technology 24: 364-371.
[16] Bajpei T., Chelladurai H., and Ansari M. Z., 2016, Mitigation of residual stresses and distortions in thin aluminium alloy GMAW plates using different heat sink models, Journal of Manufacturing Processes 22: 199-210.
[17] Sahu S.A., Singhal A., Chaudhary S., 2018, Surface wave propagation in functionally graded piezoelectric material: An analytical solution, Journal of Intelligent Material Systems and Structures 29(3): 423-437.
[18] Wen S.W., Hilton P., Farrugia D.C. J., 2001, Finite element modelling of a submerged arc welding process, Journal of Materials Processing Technology 119(1-3): 203-209.
[19] Golestaneh S.J., Ismail N., Ariffin M.K.A.M., Tang S.H., Forouzan M.R., Maghsoudi A.A., Firoozi Z., 2014, Minimization of residual stresses in submerged arc welding process of oil and gas steel pipes by committee machine, Applied Mechanics and Materials 564: 519-524.
[20] Forouzan M.R., Heidari A., Golestaneh S.J., 2009, FE simulation of submerged arc welding of API 5L-X70 straight seam oil and gas pipes, Journal of Computational Methods in Engineering 28(1): 93-110.
[21] Singh M.K., Sahu S.A., Singhal A., Chaudhary S., 2018, Approximation of surface wave velocity in smart composite structure using Wentzel–Kramers–Brillouin method, Journal of Intelligent Material Systems and Structures 29(18): 3582-3597.
[22] Gery D., Long H., Maropoulos P., 2005, Effects of welding speed, energy input and heat source distribution on temperature variations in butt joint welding, Journal of Materials Processing Technology 167(2-3): 393-401.
[23] Mazruei G., Heidari A., 2016, A new plan to connect aluminum tubes of subsurface structures, Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering 9(3): 455-466.
[24] Da Nóbrega J., Diniz D., Silva A., Maciel T., de Albuquerque V., Tavares J., 2016, Numerical evaluation of temperature field and residual stresses in an API 5L X80 steel welded joint using the finite element method, Metals 6(2): 28.
[25] Jia X., Xu J., Liu Z., Huang S., Fan Y., Sun Z., 2014, A new method to estimate heat source parameters in gas metal arc welding simulation process, Fusion Engineering and Design 89(1): 40-48.
[26] Nasim K., Arif A.F.M., Al-Nassar Y.N., Anis M., 2015, Investigation of residual stress development in spiral welded pipe, Journal of Materials Processing Technology 215: 225-238.
[27] Shen J., Chen Z., 2014, Welding simulation of fillet-welded joint using shell elements with section integration, Journal of Materials Processing Technology 214(11): 2529-2536.
