Large Deformation Hermitian Finite Element Coupled Thermoelasticity Analysis of Wave Propagation and Reflection in a Finite Domain
Subject Areas : Mechanics of SolidsM Mirparizi 1 , M Shariyat 2 , A.R Fotuhi 3
1 - Department of Mechanical Engineering, Yazd University, Yazd, Iran
2 - Faculty of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran
3 - Department of Mechanical Engineering, Yazd University, Yazd, Iran
Keywords:
Abstract :
[1] Melan E., Parkus H., 1953, Wärmespannungen in Platten, Wärmespannungen, Springer.
[2] Nowacki W., 1970, Problems of thermoelasticity, Progress in Aerospace Sciences 10: 1-63.
[3] Nowacki W., 1986, Thermoelasticity, Polish Scientific Publishers, Warsaw, and Pergamon Press, Oxford.
[4] Nowacki W., 1975, Dynamic Problems of Thermoelasticity, Springer Science & Business Media.
[5] Danilovskaya V.I., 1950, Thermal stresses in an elastic half-Space arising after a sudden heating of its boundary, Pelageya Yakovlevna Kochina 14(3): 316-318.
[6] Manoach E., Ribeiro P., 2004, Coupled, thermoelastic, large amplitude vibrations of Timoshenko beams, International Journal of Mechanical Sciences 46(11): 1589-1606.
[7] Vujošević L., Lubarda V., 2002, Finite-strain thermoelasticity based on multiplicative decomposition of deformation gradient, Theoretical and Applied Mechanics 28-29: 379-399.
[8] Abo-El-Nour N., Ghaleb A., Maugin G., 1994, Harmonic wave generation in nonlinear thermoelasticity, International Journal of Engineering Science 32(7): 1103-1116.
[9] Slemrod M., 1981, Global existence, uniqueness, and asymptotic stability of classical smooth solutions in one-dimensional non-linear thermoelasticity, Archive for Rational Mechanics and Analysis 76(2): 97-133.
[10] Rawy E., Iskandar L., Ghaleb A., 1998, Numerical solution for a nonlinear, one-dimensional problem of thermoelasticity, Journal of Computational and Applied Mathematics 100(1): 53-76.
[11] Sweilam N., 2007, Harmonic wave generation in non linear thermoelasticity by variational iteration method and Adomian's method, Journal of Computational and Applied Mathematics 207(1): 64-72.
[12] Rogovoi A., Stolbova O., 2008, Evolutionary model of finite-strain thermoelasticity, Journal of Applied Mechanics and Technical Physics 49(3): 500-509.
[13] Kocakaplan S., Tassoulas J.L., 2019, Wave propagation in initially-stressed elastic rods, Journal of Sound and Vibration 443: 293-309
[14] Marzani A., Viola E., Bartoli I., Scalea F.L., Rizzo P., 2008, A semi-analytical finite element formulation for modeling stress wave propagation in axisymmetric damped waveguides, Journal of Sound and Vibration 318: 488-505.
[15] Mirparizi M., Fotuhi A.R., Shariyat M., 2020, Nonlinear coupled thermoelastic analysis of thermal wave propagation in a functionally graded finite solid undergoing finite strain, Journal of Thermal Analysis and Calorimetry 139: 2309-2320.
[16] Shariyat M., Khaghani M., Lavasani S.M.H., 2010, Nonlinear thermoelasticity, vibration, and stress wave propagation analyses of thick FGM cylinders with temperature-dependent material properties, European Journal of Mechanics - A/Solids 29(3): 378-391.
[17] Shariyat M., 2009, A rapidly convergent nonlinear transfinite element procedure for transient thermoelastic analysis of temperature-dependent functionally graded cylinders, Journal of Solid Mechanics 1(4):313-327.
[18] Shariyat M., 2012, Nonlinear transient stress and wave propagation analyses of the FGM thick cylinders, employing a unified generalized thermoelasticity theory, International Journal of Mechanical Sciences 65(1):24-37.
[19] Parkus H., 1976, Thermoelasticity, Springer, New York.
[20] Eslami M.R., Hetnarski R.B., Ignaczak J., Noda N., Sumi N., Tanigawa Y., 2013, Theory of Elasticity and Thermal Stresses, Springer.
[21] Hetnarski R.B., Eslami M.R., 2009, Thermal Stresses, Springer.
[22] Eslami M.R., 2014, Finite Elements Methods in Mechanics, Springer International Publishing Switzerland.
[23] Shariyat M., Behzad H., Shaterzadeh A.R., 2018, 3D thermomechanical buckling analysis of perforated annular sector plates with multiaxial material heterogeneities based on curved B-spline elements, Composite Structures 188: 89-103.
[24] Shariyat M., Niknami A., 2016. Impact analysis of strain-rate-dependent composite plates with SMA wires in thermal environments: Proposing refined coupled thermoelasticity, constitutive, and contact models, Composite Structures 136: 191-203.
[25] Niknami A., Shariyat M., 2016, Refined constitutive, bridging, and contact laws for including effects of the impact-induced temperature rise in impact responses of composite plates with embedded SMA wires, Thin-Walled Structures 106: 166-178.
[26] Shariyat M., Ghafourinam M., 2019, Hygrothermomechanical creep and stress redistribution analysis of thick-walled FGM spheres with temperature and moisture dependent material properties and inelastic radius changes, International Journal of Pressure Vessels and Piping 169: 94-114.
[27] Shariyat M., Jahanshahi S., Rahimi H., 2019, Nonlinear Hermitian generalized hygrothermoelastic stress and wave propagation analyses of thick FGM spheres exhibiting temperature, moisture, and strain-rate material dependencies, Composite Structures 229: 111364.
[28] Shariyat M., Ghaznavi A., Hosseini S.H., 2020, On inefficiency of the shape memory alloys in dynamically loaded sandwich plates with structural damping: New 3D zigzag-viscoelasticity theory and asymmetric transformations, Thin–Walled Structures 155: 106879.
[29] Shariyat M., Lavasani S.M.H., Khaghani M., 2010, Nonlinear transient thermal stress and elastic wave propagation analyses of thick temperature-dependent FGM cylinders, using a second-order point-collocation method, Applied Mathematical Modelling 34: 898-918.
[30] Youssef M., Lehaibi E., 2007, State-space approach of two-temperature generalized thermoelasticity, International Journal of Solids and Structures 44(5): 1550-1562.
[31] Shariyat M., 2009, A nonlinear Hermitian transfinite element method for transient behavior analysis of hollow functionally graded cylinders with temperature-dependent materials under thermo-mechanical loads, International Journal of Pressures Vessels and Piping 86: 280-289.
[32] Azadi M., Shariyat M., 2010, Nonlinear transient transfinite element thermal analysis of thick-walled FGM cylinders with temperature-dependent material properties, Meccanica 45(3): 305-18.
[33] Alipour M.M., Shariyat M., 2018, Analytical layerwise stress and deformation analysis of laminated composite plates with arbitrary shapes of interfacial imperfections and discontinuous lateral deflections, Composite Structures 200: 88-102.
[34] Shariyat M., Eslami M.R., 1996, Isoparametric finite-element thermoelasto-plastic creep analysis of shells of revolution, International Journal of Pressures Vessels and Piping 68(3): 249-59.
[35] Ting E., Chen H., 1982, A unified numerical approach for thermal stress waves, Computers & Structures 15(2): 165-175.
[36] Lee T.W., Sim W.J., 1992, Efficient time-domain finite element analysis for dynamic coupled thermoelasticity, Computers & Structures 45(4): 785-93.
[37] Stailess Steel, Table of Technical Properties, Materials and Applications Series, 2007, http://www.euro-inox.org.
[38] Gould P.L., 1998, Analysis of Shells and Plates, Prentice Hall.