Semi Analytical Analysis of FGM Thick-Walled Cylindrical Pressure Vessel with Longitudinal Variation of Elastic Modulus under Internal Pressure

Subject Areas : Engineering

M Shariati ¹ , H Sadeghi ² , M Ghannad ³ , H Gharooni ⁴

1 - Department of Mechanical Engineering, Ferdosi University
2 - Department of Mechanical Engineering, Shahrood University
3 - Department of Mechanical Engineering, Shahrood University
4 - Department of Mechanical Engineering, Shahrood University

Received: 2015-02-15 Accepted : 2015-04-03 Published : 2015-06-30

Keywords:

References:

[1] Fukui Y., Yamanaka N., 1992, Elastic analysis for thick-walled tubes of functionally graded materials subjected to internal pressure, JSME International Journal Series I 35(4): 891-900.
[2] Tutuncu N., Ozturk M., 2001, Exact solution for stresses in functionally graded pressure vessel, Composites Part B: Engineering 32: 683-686.
[3] Jabbari M., Sohrab pour S., Eslami M.R., 2002, Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads, International Journal of Pressure Vessel and Piping 79: 493-497.
[4] Eipakchi H.R., Khadem S.E., Rahimi G.H., 2008, Axisymmetric stress analysis of a thick conical shell with varying thickness under nonuniform internal pressure, Journal of Engineering Mechanics 134: 601-610.
[5] Eslami M.R., Babaei M.H., Poultangari R., 2005, Thermal and mechanical stresses in a functionally graded thick sphere, International Journal of Pressure Vessel and Piping 82: 522-527.
[6] Dai H.L., Fu Y.M., Dong Z.M., 2006, Exact solutions for functionally graded pressure vessels in a uniform magnetic field, International Journal of Solids and Structures 43: 5570-5580.
[7] Naghdabadi R., Kordkheili S.A., 2005, A finite element formulation for analysis of functionally graded plates and shells, ASME Journal of Applied Mechanics 74: 375-386.
[8] Hongjun X., Zhifei S., Taotao Z., 2006, Elastic analyses of heterogeneous hollow cylinders, Mechanics Research Communications 33(5): 681-691.
[9] Zhifei S., Taotao Z., Hongjun X., 2007, Exact solutions of heterogeneous elastic hollow cylinders, Composite Structures 79: 140-147.
[10] Tutuncu N., 2007, Stresses in thick-walled FGM cylinders with exponentially-varying properties, Engineering Structures 29: 2032-2035.
[11] Ghannad M., Nejad M.Z., 2010, Elastic analysis of pressurized thick hollow cylindrical shells with clamped-clamped ends, Mechanika 5(85): 11-18.
[12] Ghannad M., Rahimi G.H., Zamani Nejad M., 2012, Determination of displacements and stresses in pressurized thick cylindrical shells with variable thickness using perturbation technique, Mechanika 18(1): 14-21.
[13] Gharooni H., Ghannad M., 2012, Analytical solution of rotary pressurized FGM cylinder by the usage of first order shear deformation theory, 11th Conference of Iranian Aerospace Society 15024: 195.
[14] Liu L., Li J., Ding M., Yang X., 2007, Development of SiC/(W, Ti)C gradient ceramic nozzle materials for sand blasting surface treatments, International Journal of Refractory Metals and Hard Materials 25(2): 130-137.
[15] Liu L., Deng J., 2008, Study on erosion wear mechanism of SiC/(W,Ti)C gradient ceramic nozzle material, Journal of Key Engineering Materials 375(376): 440-444.
[16] Asemi K., Salehi M., Akhlaghi M., 2011, Elastic solution of a two-dimensional functionally graded thick truncated cone with finite length under hydrostatic combined loads, Acta Mechanica 217(1-2): 119-134.
[17] Masoud Asgari M., Akhlaghi M., 2010, Transient thermal stresses in two-dimensional functionally graded thick hollow cylinder with finite length, Archive of Applied Mechanics 80(4): 353-376.
[18] Ghannad M., Rahimi G.H., Zamani Nejad M., 2013, Elastic analysis of pressurized thick cylindrical shells with variable thickness made of functionally graded materials, Composites: Part B 45: 388-396.