Measurement of Variation in Fracture Strength and Calculation of Stress Concentration Factor in Composite Laminates with Circular Hole

Subject Areas : Engineering

A.R Ghasemi ¹ , I Razavian ²

1 - Department of Mechanical Engineering, University of Kashan
2 - Department of Mechanical Engineering, University of Kashan

Received: 2012-06-13 Accepted : 2012-08-15 Published : 2012-09-29

Keywords:

References:

[1] Rooijen R.V., Sinke J., De-Veris T. J., Zwaag S.V.D., 2004, Property optimization in fiber metal laminates, Journal of Applied Composite Materials 11(2): 63-76.

[2] Hagenbeek M., Hengel C., Bosker O.J., Vermeeren C.A.J.R., 2003, Static properties of fiber metal laminates, Journal Of Applied Composite Materials 10(4): 207-222.

[3] Nuismer R.J., Whitney J.M., 1976, Uniaxial fracture of composite laminates containing stress concentrations, Fracture Mechanics of Composites ASTM STP 593:117-142.

[4] Pipes R.B., Wetherhold R.C., Gillespie J.W., 1979, Notched strength of composite materials, Journal of Composite Materials 13: 148-160.

[5] Tan S.C., 1987, Laminated composites containing an elliptical opening. Approximate stress Analyses and fracture models, Journal of Composite Materials 21: 925-948.

[6] Chang F.K., Chang K.Y., 1987, A progressive damage model for laminated composites containing stress concentrations, Journal of Composite Materials 21: 834-855.

[7] Waddoups M.E., Eisenmann J.R., Kaminski B.E., 1971, Macroscopic fracture mechanics of advanced composite materials, Journal of Composite Materials 5: 446-454.

[8] Mar J.W., Lin K.Y., 1979, Characterization of splitting process in graphite/epoxy composites, Journal of Composite Materials 13: 278-287.

[9] Backlund J., 1981, Fracture analysis of notched composites, Computer and Structure 13: 145-154.

[10] Ericsson I., Aronsson C.G., 1990, Strength of tensile loaded graphite/ epoxy laminates containing cracks, open and filled holes, Journal of Composite Materials 24: 456-482.

[11] Shin C.S., Wang C.M., 2004, An improved cohesive zone model for residual notched strength prediction of composite laminates with different orthotropic lay-up, Journal of Composite Materials 38(9): 713-736.

[12] Khatibi A., Ye L., 1997, Residual strength simulation of fibre reinforced metal laminates containing a circular hole, Journal of Composite Materials 31(9): 142-163.

[13] Spotts M. F., 1998, Design of Machine Elements, Prentice Hall.

[14] Ansys Help System, Analysis Guide and Theory Reference, ver10.

[15] ASTM, 2003, Standard Test Method For Tensile Properties of Polymer Matrix Composite Materials, Designation D 3039.

[16] Wu G., Tan Y., Yang J.M., 2007, Evaluation of residual strength of notched fiber metal laminates, Journal of Materials Science and Engineering, Part A 457: 338-349.