Effect of Temperature Changes on Dynamic Pull-in Phenomenon in a Functionally Graded Capacitive Micro-beam

Subject Areas : Engineering

B Mohammadi-Alasti ¹ , G Rezazadeh ² , M Abbasgholipour ³

1 - Department of Agricultural Machinery Engineering, Bonab Branch, Islamic Azad University
2 - Department of Mechanical Engineering, Urmia University
3 - Department of Agricultural Machinery Engineering, Bonab Branch, Islamic Azad University

Received: 2012-07-21 Accepted : 2012-09-26 Published : 2012-09-30

Keywords:

References:

[1] Simsek M., 2010, Vibration analysis of a functionally graded beam under a moving mass by using different beam theories, Composite Structures 92: 904–917.

[2] Sankar B.V., 2001, An elasticity solution for functionally graded beams, Composite Science and Technology 61(5): 689–696.

[3] Zhong Z., Yu T., 2007, Analytical solution of a cantilever functionally graded beam, Composites Science and Technology 67: 481-488.

[4] Chakraborty A., Gopalakrishnan S., Reddy J.N., 2003, A new beam finite element for the analysis of functionally graded materials, International Journal of Mechanic Science 45(3): 519–539.

[5] Chakraborty A., Gopalakrishnan S., 2003, A spectrally formulated finite element for wave propagation analysis in functionally graded beams, International Journal of Solids and Structures 40(10): 2421–2448.

[6] Kapuria S., Bhattacharyya M., Kumar A.N., 2008, Bending and free vibration response of layered functionally graded beams: A theoretical model and its experimental validation, Composite Structures 82(3): 390-402.

[7] Aydogdu M., Taskin V., 2007, Free vibration analysis of functionally graded beams with simply supported edges, Material Design 28(5): 1651–1656.

[8] Gharib A., Salehi M., Fazeli S., 2008, Deflection control of functionally graded material beams with bonded piezoelectric sensors and actuators, Materials Science and Engineering 498: 110-114.

[9] Piovan T., Sampaio R., 2008, Vibrations of axially moving flexible beams made of functionally graded materials, Thin-Walled Structures 46: 112-121.

[10] Xiang H.J., Shi Z.F., 2009, Static analysis for functionally graded piezoelectric actuators or sensors under a combined electro-thermal load, European Journal of Mechanics A/Solids 28: 338-346.

[11] Ying J., Lü C.F., Chen W.Q., 2008, Two-dimensional elasticity solutions for functionally graded beams resting on elastic foundations, Composite Structures 84(3): 209–219.

[12] Sina S.A., Navazi H.M., Haddadpour H., 2009, An analytical method for free vibration analysis of functionally graded beams, Materials and Design 30(3): 741–747.

[13] Simsek M., Kocatürk T., 2009, Free and forced vibration of a functionally graded beam subjected to a concentrated moving harmonic load, Composite Structures 90(4): 465-473.

[14] Simsek M., 2010, Non-linear vibration analysis of a functionally graded Timoshenko beam under action of a moving harmonic load, Composite Structures 92(10): 2532-2546.

[15] Simsek M., 2010, Fundamental frequency analysis of functionally graded beams by using different higher-order beam theories, Nuclear Engineering and Design 240: 697-705.

[16] Khalili S.M.R., Jafari A.A., Eftekhari S.A., 2010, A mixed Ritz-DQ method for forced vibration of functionally graded beams carrying moving loads, Composite Structures 92(10): 2497-2511.

[17] Mahi A., Adda B.E.A., Tounsi A., Mechab I., 2010, An analytical method for temperature-dependent free vibration analysis of functionally graded beams with general boundary conditions, Composite Structures 92(8): 1877-1887.

[18] Craciunescu C.M., Wuttig M., 2003, New ferromagnetic and functionally grade shape memory alloys, Journal of Optoelectron Advance Material 5(1): 139–146.

[19] Fu Y.Q., Du H.J., Zhang S., 2003, Functionally graded TiN/TiNi shape memory alloy films, Journal of Materials Letters 57(20): 2995–2999.

[20] Fu Y.Q., Du H.J., Huang W.M., Zhang S., Hu M., 2004, TiNi-based thin films in MEMS applications: a review, Journal of Sensors and Actuators A 112(2–3): 395–408.

[21] Witvrouw A., Mehta A., 2005, The use of functionally graded poly-SiGe layers for MEMS applications, Journal of Functionally Graded Materials VIII 492–493: 255–260.

[22] Lee Z., Ophus C., Fischer L.M., Nelson-Fitzpatrick N., Westra K.L., Evoy S., et al., 2006, Metallic NEMS components fabricated from nanocomposite Al–Mo films, Journal of Nanotechnology 17(12): 3063–3070.

[23] Rahaeifard M., Kahrobaiyan M.H., Ahmadian M.T., 2009, Sensitivity analysis of atomic force microscope cantilever made of functionally graded materials, Proceedings of the 3rd international conference on micro-and nanosystems (MNS3), San Diego, CA, USA.

[24] Senturia S., 2001, Microsystem Design, Norwell, MA: Kluwer.

[25] Sadeghian H., Rezazadeh G., Osterberg P., 2007, Application of the generalized differential quadrature method to the Study of Pull-In Phenomena of MEMS switches, Journal of Micro Electromechanical System IEEE/ASME 16(6): 1334-1340.

[26] Rezazadeh G., Khatami F., Tahmasebi A., 2007, Investigation of the torsion and bending effects on static stability of electrostatic torsional micromirrors, Journal of Microsystem Technologies 13(7): 715-722.

[27] Sazonova V., 2006, A Tunable Carbon Nanotube Resonator, Ph.D. Thesis, Cornell University.

[28] Rezazadeh G., Tahmasebi A., Zubtsov M., 2006, Application of piezoelectric layers in electrostatic MEM actuators: controlling of Pull-in Voltage, Journal of Microsystem Technologies 12(12): 1163-1170.

[29] Bao M., Wang W., 1996, Future of Micro Electromechanical Systems (MEMS), Sensors and Actuators A: Physical 56: 135-141.

[30] Mehdaoui A., Pisani M.B., Tsamados D., Casset F., Ancey P., Ionescu A.M., 2007, MEMS tunable capacitors with fragmented electrodes and rotational electro-thermal drive, Journal of Microsystem Technologies 13(11): 1589-1594.

[31] Zhang Y., Zhao Y., 2006, Numerical and analytical study on the pull-in instability of micro- structure under electrostatic loading, Journal of Sensors and Actuators A: Physical 127: 366-367.

[32] Nguyen C.T.C., Katehi L.P.B., Rebeiz G.M., 1998, Micromachined devices for wireless communications, Proceedings of the IEEE 86(8): 1756-1768.

[33] Hasanyan D.J., Batra R.C., Harutyunyan S., 2008, Pull-in instabilities in functionally graded micro-thermo electromechanical systems, Journal of Thermal Stresses 31: 1006–1021.

[34] Jia X.L., Yang J., Kitipornchai S., 2010, Characterization of FGM micro-switches under electrostatic and Casimir forces, Materials Science and Engineering 10: 012178.

[35] Zhou L., Tang D., 2007, A functionally graded structural design of mirrors for reducing their thermal deformations in high-power laser systems by finite element method, Optics & Laser Technology 39: 980–986.

[36] Noda N., Jin Z.J., 1993, Steady thermal stresses in an infinite nonhomogenous elastic solid containing a crack, Thermal Stresses 16: 116–181.

[37] Erdogan F., Wu B.H., 1996, Crack problems in FGM layers under thermal stresses, Journal of Thermal Stresses 19: 237–265.

[38] Asghari M., Ahmadian M.T., Kahrobaiyan M.H., Rahaeifard M., 2010, On the size-dependent behavior of functionally graded micro-beams, Journal of Materials and Design 31: 2324–2329.

[39] Martin H., 2009, Sadd, Elasticity, Theory, Applications, and Numerics, Academic Press, second Edition.

[40] Mohammadi-Alasti B., Rezazadeh G., Borgheei A.M., Minaei S., Habibifar R., 2011, On the mechanical behavior of a functionally graded micro-beam subjected to a thermal moment and nonlinear electrostatic pressure, Composite Structures 93: 1516–1525.

[41] Sun Y., Fang D., Soh A.K., 2006, Thermoelastic damping in micro-beam resonators, International Journal of Solids and Structures 43: 3213-3229.

[42] Younis M., Nayfeh A.H., 2003, A study of the nonlinear response of a resonant micro-beam to an electric actuation, Journal of Nonlinear Dynamics 31: 91–117.

[43] Neubrand A., Chung T.J., Steffler E.D., Fett T., Rodel J., 2002, Residual stress in functionally graded plates, Journal of Material Research 17(11): 2912–2920.

[44] Bin J., Wanji C., 2010, A new analytical solution of pure bending beam in couple stress elasto-plasticity, Theory and applications, International Journal of Solids and Structures 47: 779–785.

[45] Abbasnejad B., Rezazadeh G., 2012, Mechanical behavior of a FGM micro-beam subjected to a nonlinear electrostatic pressure, International Journal of Mechanics and Materials in Design, 8:381–392 .

[46] Rezazadeh G., Pashapour M., Abdolkarimzadeh F., 2011, Mechanical behavior of a bilayer cantilever microbeam subjected to electrostatic force, mechanical shock and thermal moment, International Journal of Applied Mechanics, 3(3): 543–561.

[47] Rezazadeh G., Fathalilou M., 2011, Pull-in Voltage of electrostatically-actuated microbeams in terms of lumped model Pull-in Voltage using novel design corrective coefficients, sensing and imaging, AnInternational Journal 12(3-4):117-131.

[48] Bhangale R.K., Ganesan N., Padmanabhan C., 2006, Linear thermoelastic buckling and free vibration behavior of functionally graded truncated conical shells, Journal of Sound and Vibration 292: 341–371.

[49] Yang J., Liew K.M., Wu Y.F., Kitipornchai S., 2006, Thermo-mechanical post-buckling of FGM cylindrical panels with temperature-dependent properties, International Journal of Solids Structures 43: 307–324.

[50] Ke L.L., Yang J., Kitipornchai S., 2010, Nonlinear free vibration of functionally graded carbon nanotube-reinforced composite beams, Composite Structures 92: 676–683.

[51] Alibeigloo A., 2010, Thermoelasticity analysis of functionally graded beam with integrated surface piezoelectric layers, Composite Structures 92: 1535–1543.

[52] Anandakumar G., Kim J.H., 2010, On the modal behavior of a three-dimensional functionally graded cantilever beam: Poisson’s ratio and material sampling effects, Composite Structures 92: 1358–1371.

[53] Azizi S., 2008, Design of micro accelerometer to use as airbag activator, MSc thesis, Mechanical Engineering Department, Tarbiat Modares University, Tehran, Iran, 53–54, (in Persian).

[54] Seydel R., 2009, Practical Bifurcation and Stability Analysis, Springer-Verlag New York, LLC, Third Edition.

[55] Kuznetsov Y.A., 1998, Elements of Applied Bifurcation Theory, Springer-Verlag, New York, Second Edition.