Design and Analysis of Graded Honeycomb Shock Absorber for Increasing the Safety of Passengers in Armored Vehicles Exposed to Mine Explosion

Subject Areas : Engineering

S. A Galehdari ¹ , H Khodarahmi ² , A Atrian ³

1 - Modern Manufacturing Technologies Research Center, Najafabad Branch, Islamic Azad University, Najafabad, Iran
2 - Department of Mechanical Engineering, I H University, Tehran, Iran
3 - Modern Manufacturing Technologies Research Center, Najafabad Branch, Islamic Azad University, Najafabad, Iran

Received: 2017-03-10 Accepted : 2017-05-08 Published : 2017-06-30

Keywords:

References:

[1] Test Methodology for Protection of Vehicle Occupants against Anti-Vehicular Landmine Effects, Technical Report, NATO, 2007.
[2] Final Report of HFM-090 Task Group 25 on Test Methodology for Protection of Vehicle Occupants against Anti-Vehicular Landmine Effects, NATO, 2007.
[3] Chen Q., Pugno N.M., 2013, In-plane elastic properties of hierarchical nano-honeycombs: The role of the surface effect, European Journal of Mechanics A/Solids 37: 248-255.
[4] Nakamoto H., Adachi T., Araki W., 2009, In-plane impact behavior of honeycomb structures randomly filled with rigid inclusions, International Journal of Impact Engineering 36: 73-80.
[5] Tanaka K., Nishida M., Ueki G., 2009, Shock absorption of aluminum honeycombs for in-plane impacts, 28th International Congress on High-Speed Imaging and Photonics.
[6] Atli-Veltin B., 2009, Effect of Geometric Parameters on the In-Plane Crushing Behavior of Honeycombs and Honeycombs with Facesheets, PhD thesis, The Pennsylvania State University.
[7] Stromsoe J.D., 2011, Modeling of In-Plane Crushed Honeycomb Cores with Applications to Ramp Down Sandwich Structure Closures, Ms thesis, San Diego State University.
[8] Asadi M., Walker B., Shirvani H., 2009, An investigation to compare the application of shell and solid element honeycomb model in ODB, 7th European LS-Dyna Conference.
[9] Menna C., Zinno A., Asprone D., Prota A., 2013, Numerical assessment of the impact behavior of honeycomb sandwich structures, Composite Structures 106: 326-339.
[10] Radzai Said M., Tan C.F., 2008, Aluminum honeycomb under quasi-static compressive loading: an experimental investigation, Suranaree Journal of Science and Technology 16: 1-8.
[11] Chao L.B., Ping Z.G., Jian L.T., 2012, Low strain rate compressive behavior of high porosity closed-cell aluminum foams, Science China Technological Sciences 55: 451-463.
[12] Shariyat M., Moradi M., Samaee S., 2012, Nonlinear finite element eccentric low-velocity impact analysis of rectangular laminated composite plates subjected to in-phase/anti-phase biaxial preloads, Journal of Solid Mechanics 4(2): 177-194.
[13] Rezaei Pour Almasi A., Fariba F., Rasoli S., 2015, Modifying stress-strain curves using optimization and finite elements simulation methods, Journal of Solid Mechanics 7(1): 71-82.
[14] Galehdari S. A., Kadkhodayan M., Hadidi-Moud S., 2015, Analytical, experimental and numerical study of a graded honeycomb structure under in-plane impact load with low velocity, International Journal of Crashworthiness 20(4): 387-400.
[15] Muhammad A., 2007, Study of a Compact Energy Absorber, PhD Thesis, Iowa State University.
[16] Galehdari S. A., Kadkhodayan M., Hadidi-Moud S., 2015, Analytical numerical and experimental study of energy absorption of graded honeycomb structure under in-plane low velocity impact, Modares Mechanical Engineering 14(15): 261-271.
[17] Galehdari S. A., Kadkhodayan M., 2015, Study of graded honeycomb structure under in-plane and out of plane impact loading, 17th International Mechanical Engineering Conference (ISME 2015), Amirkabir University of technology, Tehran, Iran.
[18] Galehdari S. A., Kadkhodayan M., Hadidi-Moud S., 2015, Low velocity impact and quasi-static in-plane loading on a graded honeycomb structure; experimental, analytical and numerical study, Aerospace Science and Technology 47: 425-433.
[19] Tabiei A., Nilakantan G., 2014, Reduction of acceleration induced injuries from mine blasts under infantry vehicles, 6th European Ls-Dyna Users’ Conference, Gothenburg, Sweden.
[20] Sławiński G., Dziewulski P., Niezgoda T., 2015, Investigation of human body exposed to blast wave derived from improvised explosive devices, Journal of Kones Powertrain and Transport 22(4): 287-294.
[21] Khodarahmi H., 2014, Investigation, Analysis Tactical Armored Vehicle, Advanced Ground Defense Technology Research Center, Imam Hossein University .
[22] Huang H.H., 2009, Controller Design for Stability and Rollover Prevention of Multi-Body Ground Vehicles with Uncertain Dynamics and Faults, PhD Thesis, The Ohio State University.
[23] Michelin Cargoxbib and Xp 27, 2014, Technical Documentation, Michelin Manufacturing Company.
[24] Wong J.Y., 2001, Theory of Ground Vehicles, John Wiley and Sons.
[25] Halderman J.D., 2012, Automotive Technology, Pearson.
[26] 49 CFR 571.208 – Standard No. 208, 2012, Occupant Crash Protection, Cornell University Law School.
[27] Owen P.L., 2004, Procedures for Using the Amanda Model in Acceleration Response Studies (Tutorial by Example), Army Research Laboratory.
[28] Panowicz R., Sybilski K., Koodziejczyk D., 2011, Numerical analysis of effects of IDE side explosion on crew of light armored wheeled vehicle, Journal of Kones Powertrain and Transport 18(4): 331-339.