Creep and Stress Redistribution Analysis of Thick-Wall FGM Spheres Subjected to Mechanical Load and Heat Flux – An Analytical Approach
Subject Areas : ThermomechanicalAli Ziaei-Asl 1 , Mohammad Reza Saviz 2 , Javad Pourabdollah 3
1 - Department of Mechanical Engineering, Engineering Faculty, Azarbaijan Shahid Madani University, Tabriz, Iran
2 - Department of Mechanical Engineering, Engineering Faculty, Azarbaijan Shahid Madani University, Tabriz, Iran
3 - Department of Mechanical Engineering, East Azarbaijan Science and Research Branch, Islamic Azad University, Tabriz, Iran
Keywords:
Abstract :
[1] H.-S. Shen, Functionally graded materials: Nonlinear analysis of plates and shells, ed., CRC Press, 2016,
[2] A. Amiri Delouei, A. Emamian, S. Karimnejad, H. Sajjadi, A. Tarokh, "On 2d asymmetric heat conduction in functionally graded cylindrical segments: A general exact solution", Int. J. Heat Mass Transfer, Vol. 143, No. 2019, pp. 118515.
[3] A.H. Sofiyev, N. Kuruoğlu, "The stability of fgm truncated conical shells under combined axial and external mechanical loads in the framework of the shear deformation theory", Compos. B. Eng., Vol. 92, No. 2016, pp. 463-476.
[4] M. Niino, "Functionally gradient materials as thermal barrier for space plane", J. Jpn. Compos Mater., Vol. 13, No. 1987, pp. 257-264.
[5] N. Oxman, "Structuring materiality: Design fabrication of heterogeneous materials", Arch. Design, Vol. 80, No. 4, 2010, pp. 78-85.
[6] S.H. Mathes, H. Ruffner, U. Graf-Hausner, "The use of skin models in drug development", Adv. Drug Deliv. Rev., Vol. 69, No. 2014, pp. 81-102.
[7] G. Udupa, S.S. Rao, K. Gangadharan, "Functionally graded composite materials: An overview", Procedia Mater. Sci., Vol. 5, No. 2014, pp. 1291-1299.
[8] F.V. Tahami, A.H. Daei-Sorkhabi, F.R. Biglari, "Creep constitutive equations for cold-drawn 304l stainless steel", Mater. Sci. Eng.: A , Vol. 527, No. 18, 2010, pp. 4993-4999.
[9] J.T. Boyle, J. Spence, Stress analysis for creep, ed., Elsevier, 2013,
[10] V. Daghigh, H. Daghigh, A. Loghman, A. Simoneau, "Time-dependent creep analysis of rotating ferritic steel disk using taylor series and prandtl–reuss relation", Int. J. Mech. Sci., Vol. 77, No. 2013, pp. 40-46.
[11] Q. Cen, D.K.L. Tsang, Y. Lu, "Creep damage analysis of thin-walled pressure vessel based on continuum damage model under static loading", Int. J. Press. Vessel. Pip., Vol. 177, No. 2019, pp. 103994.
[12] D. Pathania, G. Verma, "Temperature and pressure dependent creep stress analysis of spherical shell", Int. J. Appl. Mech. Eng., Vol. 24, No. 1, 2019, pp. 105-115.
[13] M. Eslami, M. Babaei, R. Poultangari, "Thermal and mechanical stresses in a functionally graded thick sphere", Int. J. Press. Vessel. Pip., Vol. 82, No. 7, 2005, pp. 522-527.
[14] Y. Bayat, M. Ghannad, H. Torabi, "Analytical and numerical analysis for the fgm thick sphere under combined pressure and temperature loading", Arch. Appl. Mech., Vol. 82, No. 2, 2012, pp. 229-242.
[15] E.-S. Habib, M.A. El-Hadek, A. El-Megharbel, "Stress analysis for cylinder made of fgm and subjected to thermo-mechanical loadings", J. Met., Vol. 9, No. 1, 2019, pp. 4.
[16] A. Loghman, A. Ghorbanpour Arani, S.M.A. Aleayoub, "Time-dependent creep stress redistribution analysis of thick-walled functionally graded spheres", Mech. Time Depend. Mater., Vol. 15, No. 4, 2011, pp. 353-365.
[17] J. Jafari Fesharaki, A. Loghman, M. Yazdipoor, S. Golabi, "Semi-analytical solution of time-dependent thermomechanical creep behavior of fgm hollow spheres", Mech. Time Depend. Mater., Vol. 18, No. 1, 2014, pp. 41-53.
[18] Y.Y. Yang, "Time-dependent stress analysis in functionally graded materials", Int. J. Solids Struct., Vol. 37, No. 51, 2000, pp. 7593-7608.
[19] K. Daneshjou, M. Bakhtiari, R. Alibakhshi, M. Fakoor, "Transient thermal analysis in 2d orthotropic fg hollow cylinder with heat source", Int. J. Heat Mass Transfer, Vol. 89, No. 2015, pp. 977-984.
[20] A. Amiri Delouei, A. Emamian, S. Karimnejad, H. Sajjadi, D. Jing, "Two-dimensional analytical solution for temperature distribution in fg hollow spheres: General thermal boundary conditions", INT. COMMUN. HEAT MASS, Vol. 113, No. 2020, pp. 104531.
[21] M.Z. Nejad, M.D. Kashkoli, "Time-dependent thermo-creep analysis of rotating fgm thick-walled cylindrical pressure vessels under heat flux", Int. J. Eng. Sci., Vol. 82, No. 2014, pp. 222-237.
[22] S.R. Holdsworth, M. Askins, A. Baker, E. Gariboldi, S. Holmström, A. Klenk, M. Ringel, G. Merckling, R. Sandstrom, M. Schwienheer, S. Spigarelli, "Factors influencing creep model equation selection", Int. J. Press. Vessel. Pip., Vol. 85, No. 1, 2008, pp. 80-88.
[23] V. Kobelev, "Some basic solutions for nonlinear creep", Int. J. Solids Struct., Vol. 51, No. 19, 2014, pp. 3372-3381.