Empirical and Numerical Study of Gas Turbine Disks under Mechanical Stress and Temperature Gradient

Subject Areas :

Rasoul Yari Yari ¹ , Hamid Zarepour ² , Aazam Ghassemi ³

1 - Department of Mechanical Engineering, Faculty of Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Isfahan, Iran|Modern Manufacturing Technologies Research Center (MMTRC), Najafabad Branch, Islamic Azad University, Najafabad, Iran
2 - Department of Mechanical Engineering, Faculty of Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Isfahan, Iran|Modern Manufacturing Technologies Research Center (MMTRC), Najafabad Branch, Islamic Azad University, Najafabad, Iran
3 - Department of Mechanical Engineering, Faculty of Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Isfahan, Iran|Modern Manufacturing Technologies Research Center (MMTRC), Najafabad Branch, Islamic Azad University, Najafabad, Iran

Received: 2019-10-12 Accepted : 2020-02-03 Published : 2019-05-01

Keywords:

References:

[1] Bar, W., Orkisz, M. and Moustapha, H. 2014. Multidisciplinary Design and Optimization of Gas Turbine Engine Low Pressure Turbine at Preliminary Design Stage. Journal of KONES Powertrain and Transport. 21(3): 15-22. 

[2] Liu, J. S., Parks, G. T. and Clarkson, P. J. 2002. Optimization of Turbine Disk Profiles by Metamorphic Development. Journal of Mechanical Design. 124(2): 192-200.

[3] Eraslan, A. and Orcan, Y. 2002. Elastic–plastic Deformation of a Rotating Solid Disk of Exponentially Varying Thickness. Mechanics of Material. 34(7): 423-432.

[4] Eraslan, A. N. and Argeso, H. Limit Angular Velocities of Variable Thickness Rotating Disks. 2002. International Journal of Solids and Structures. 39(12): 3109-3130.

[5] Seireg, A. and Surana, K. S. 1992. Optimum Design of Rotating Disks. ASME. 92: 1- 10.

[6] Ray, G.S., Sinha, B.K. 1992. Profile Optimization of Variable Thickness Rotating Disc. Computers and Structures.  42(5): 809-813.

[7] Chern, J. M. and Prager, W. 1970. Optimum Design of Rotating Disks for Given Radial Displacement of Edge, Journal of Optimization Theory and Applications. 6: 161-170.

[8] Fox, R. L. 1970. Optimization Method for Engineering. Addison - Wesley, London.

[9] Cheu, T. C. 1990. Procedures for Shape Optimization of Gas Turbine Disks. Computers & Structures. 34(1): 1-4.

[10] Luchi, M. L. Poggiali, A. and Persiani, F. 1980. An Interactive Optimization Procedure Applied to the Design of Gas Turbine Discs. Computers & Structures. 11(6): 629-637.

[11] Farshi, B., Jahed, H. and Mehrabian, A. 2004. Optimum Design of Inhomogeneous Non-Uniform Rotating Discs. Computers and Structures. 82(9-10): 773-779.

[12] Jahed, H., Farshi, B. and Bidabadi, J. 2005. Minimum Weight Design of Inhomogeneous Rotating Discs. 2005. International Journal of Pressure Vessels and Piping. 82: 35-41.

[13] Brujic, D., Ristic, M., Mattone, M., Maggiore, P. and De Poli, G. P. 2010. CAD Based Shape Optimization for Gas Turbine Component Design. Structural and Multidisciplinary Optimization. 41(4): 647-659.

[14] S. Derakhshan, S. N. Kasaeian. Design and Optimization of Axial Turbine for Small Hydropower, Journal of Mechanical Engineerin (University of Tabriz), 43(2), pp. 31-40, 2013.

[15] Gutzwiller, D. P. and Turner, M. G. 2010. Rapid Low Fidelity Turbomachinery Disk Optimization. Advances in Engineering Software. 41: 779–791.

[16] Gunston, B. 2009. The Cambridge Aerospace Dictionary, 2nd ed. Cambridge University Press.

[17] Meisl, C. J. 1988. Life-Cycle-Cost Considerations for Launch Vehicle Liquid Propellant Rocket Engine. Journal of Propulsion and Power. 4(2): 26-118.

[18] Zhan, H., Zhao, W. and Wang, H. 2000. Manufacturing Turbine Blisks. Aircraft Engineering and Aerospace Technology. 72(3): 247-251.

[19] Feiner, D. M. and Griffin, J. H. 2004. Mistuning Identification of Bladed Disks Using a Fundamental Mistuning Model-Part II: Application, Journal of Turbomachinery. ASME 126(1): 159-165.

[20] Kostyuk, A. and Forlov, V. 1988. Steam and Gas Turbines, Translated from the Russian by V. Afanasyev, Mir Publishers Moscow.

[21] Rosyid, A., Es-Saheb, M. and Yahia, J. H. 2014. Stress Analysis of Nonhomogeneous Rotating Disc with Arbitrarily Variable Thickness Using Finite Element Method. Journal of Applied Sciences, Engineering and Technology. 15: 3114-3125.

[22] Zharfi, H. and Ekhteraei Toussi H. 2016. Effect of Temperature and Particle Distribution on Creep Behavior of FGM Rotating Discs (In Persian). Journal of Mechanical Engineering. 75(2): 51-59.

[23] EN 1993-1-2: Eurocode 3: Design of Steel Structures - Part 1-2: General Rules - Structural Fire Design.

[24] Stump, F. V. Silva, E. C. N. and Paulino, G. H. 2007. Optimization of Material Distribution in Functionally Graded Structures with Stress Constraints. Communications in Numerical Methods in Engineering. 23(6): 535–551.