Machining of Makrana White Marble Surfaces by Abrasive Water Jet Machining

Subject Areas :

Vishal Gupta ¹ , M.P. Garg Garg ² , N.K. Batra ³ , Arjun S. Wadwa ⁴

1 - Indian Institute of Technology Delhi, Delhi, India
2 - Mechanical Engineering Department, M. M. University, Mullana, India
3 - Mechanical Engineering Department, M. M. University, Mullana, India
4 - École de Technologie Supérieure, Montreal, Canada

Received: 2022-07-15 Accepted : 2022-08-05 Published : 2022-05-01

Keywords:

References:

[1] Domiaty, A. A., Shabara, M. A., Abdel-Rahman, A. A. and AI-Sabeeh, A. K. 1996. On the Modelling of Abrasive Waterjet Cutting. International Journal Advance Manufacturing Technology. 12: 255-265.

[2] Mazurkiewicz, M. 2000. A manufacturing tool for a new century. Journal of Materials Processing Technology 106:112-118.

[3] Akkurt, A., Kulekc¸i, M.K., Seker, U. and Ercan, F. 2004. Effect of feedrate on surface roughness in abrasive waterjet cutting applications. Journal of Materials Processing Technology. 147:389–396.

[4] Momber, A. and Kovacevic, R. 1998. Principles of Abrasive Waterjet Machining. Springer–Verlag, London.

[5] Hashish, M. 1991. Optimization factors in abrasive waterjet machining. Transact. ASME Journal of Engineering for Industry. 113: 29–37.

[6] Nalbant, M., G¨ okkaya, H. and Sur, G. 2007. Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning. Materials & Design. 28: 1379–1385.

[7] Rahmah, A., Khan, A.A. and Ramulu, M. 2003. A study of abrasive waterjet machining of Kevlar composite.  Proceedings of the 12th U.S. Water Jet Conference, 4-F.

[8] Schwetz, K.A., Sigl, L.S., Greim, J. and Knoch, H. 1995. Wear of boron carbide ceramics by abrasive waterjets. 10th International Conference on Wear of Materials. 181-183:148-155.

[9] Conner, I., Hashish, M. and Ramulu, M. 2003. Abrasive waterjet machining of aerospace structural sheet and thin plate materials. Proceedings of the 12th U.S. Water Jet Conference, 1-G.

[10] Wang, J., Wong and W.C.K. 1999. A study of abrasive water jet cutting of metallic coated sheet steels. International Journal of Machine Tools & Manufacture. 39: 855–870.

[11] Hocheng, H., Tsai, H.Y., Shiue, J.J. and Wang, B. 1997. Feasibility study of abrasive-waterjet milling of fibre-reinforced plastics. Journal of Manufacturing Science and Engineering. 119:133–142.

[12] Selvan, M., Chithirai Pon, R. and N. Sundara, M. 2012. Analysis of surface roughness in abrasive waterjet cutting of cast iron. International Journal of Science, Environment and Technology. 1:174-182.

[13] Wang, J. 1999. A machinability study of polymer matrix composites using abrasive water jet cutting technology. Journal of Materials Processing Technology. 94:30–35.

[14] Azmira, M.A., and Ahsan, A.K. 2009. A study of abrasive water jet machining process on glass/epoxy composite laminate. Journal of Materials Processing Technology. 209:6168–6173.