Optimizing the vacuum gas oil hydrocracking process temperature in the presence of Ni-Mo/γ-Al2O3-SiO2 catalyst
محورهای موضوعی : Iranian Journal of Catalysis
Ehsan Taghizadeh Yusefabad
1
(School of Chemistry, College of Science, University of Tehran, Tehran, Iran.)
Ahmad Tavasoli
2
(School of Chemistry, College of Science, University of Tehran, Tehran, Iran.)
Yahya Zamani
3
(Research Institute of Petroleum Industry (RIPI), Tehran, Iran.)
کلید واژه: VGO, Hydrocracking, Discrete lumping model,
چکیده مقاله :
A suitable model for predicting the product quality of vacuum gas oil (VGO) catalytic hydrocracking is developed. Data were obtained using an experimental catalytic hydrocracking reactor loaded with the Ni-Mo/Al2O3-SiO2 catalyst. A set of experimental runs was conducted under various operating temperatures from 380 to 450 ℃. Three distribution models were used to develop the predictive model. By the discrete lumping model, distillation curves of the cracked products (naphtha, kerosene, diesel, and gas) were obtained using the simulated distillation test. Model validation results showed that the proposed models are capable of predicting the distillation curves of the hydrocracked products accurately. Accuracy and simplicity of the developed model make it suitable to estimate the conversion and also the product distribution of hydrocracking units in refineries.
[1] T.C. Ho, Modeling of Reaction Kinetics for Petroleum Fractions, In C.S. Hsu, P.R. Robinson (Eds.), Practical Advances in Petroleum Processing, Springer, New York, 2006.
[2] J. Ancheyta, S. Sánchez, and M.A. Rodríguez, Catal. Today 109 (2005) 76–92.
[3] J. Thompson, The Synthesis and Evaluation of Molybdenum-Based Ultra-Dispersed Hydroprocessing Catalysts. M.Sc. Thesis, University of Calgary, Alberta, 2008.
[4] M.S. Rana, V. Sámano, J. Ancheyta, and J.A.I. Diaz, Fuel 86 (2007) 1216–1231.
[5] P.M. Rahimi, T. Gentzis, The Chemistry of Bitumen and Heavy Oil Processing, In C.S. Hsu, P.R. Robinson (Eds.), Practical Advances in Petroleum Processing, Springer, New York, 2006.
[6] B.E. Stangeland, Ind. Eng. Chem. Process Des. Dev. 13 (1974) 71–76.
[7] C.S. Laxminarasimhan, R.P. Verma, P.A. Ramachandran, AIChE J. 42 (1996) 2645–2653.
[8] A. Barkhordari, S. Fatemi, M. Daneshpayeh, H. Zamani, Int. J. Chem. React. Eng. 8 (2010) A81.
[9] G. Astarita, R. Ocone, AIChE J. 34 (1988)1299–1309.
[10] G. Astarita, AIChE J. 35 (1989) 529–532.
[11] I. Elizalde, J. Ancheyta, Fuel Process. Technol. 123 (2014) 114–121.
[12] P.J. Becker, N. Serrand, B. Celse, D. Guillaume, H. Dulot, Fuel 165 (2016) 306–315.
[13] S. Sánchez, M.A. Rodríguez, J. Ancheyta, Ind. Eng. Chem. Res. 44 (2005) 9409–9413.
[14] H. Hassanzadeh J. Abedi, Fuel 89 (2010) 2822–2828.
[15] H. Loria, G. Trujillo-Ferrer, C. Sosa-Stull, P. Pereira-Almao, Energy Fuels 25 (2011) 1364–1372.
[16] J. Martínez, J. Ancheyta, Fuel 100 (2012) 193–199.
[17] J.R. Restrepo-Garcia, V.G. Baldovino-Medrano, S.A. Giraldo, Appl. Catal. A 510 (2016) 98–109.
[18] J.W. Ward, Fuel Process. Technol. 35 (1993) 55–85.
[19] P.Y. Looi, A.R. Mohamed, C.T. Tye, Chem. Eng. J. 181 (2012) 717–724.
[20] A. Gutiérrez, J.M. Arandes, P. Castaño, M. Olazar, A. Barona, J. Bilbao, Chem. Eng. Technol. 35 (2012) 653–660.
[21] N. Panariti, A. Del Bianco, G. Del Piero, M. Marchionna, P. Carniti, Appl. Catal. A 204 (2000) 215–222.
[22] J. Mosio-Mosiewski, I. Morawski, Appl. Catal. A 283 (2005) 147–155.
