Investigation into Aging Effect on Wear Behavior of Titanium Alloy

محورهای موضوعی : فصلنامه شبیه سازی و تحلیل تکنولوژی های نوین در مهندسی مکانیک

امیر قیصریان ¹ , محمود عباسی ²

1 - کارشناس ارشد، شناسایی و انتخاب مواد مهندسی، دانشگاه کاشان، کاشان، ایران.
2 - استادیار دانشکده مهندسی، گروه مهندسی مواد و متالورژی، دانشگاه کاشان، کاشان، ایران.

تاریخ دریافت : 1395/01/16 تاریخ پذیرش : 1395/05/24 تاریخ انتشار : 1395/08/01

کلید واژه: Ti-6Al-4V, wear resistance, Aging, Annealing,

چکیده مقاله :

Ti-6Al-4V titanium alloy has great application in medicine and military industries due to its capabilities, namely high strength to weight ratio and corrosion resistance. In the current research, the effect of aging treatment on microstructure and wear behavior of Ti-6Al-4V titanium alloy was investigated. Pin on disk wear test was applied to assess the wear behavior. Specimens were first solution treated at 950 C and 1050 C and then were quenched and aged. Some specimens were annealed before aging at 700 C. The results showed that aging treatment resulted in the hardness increase and the wear resistance decrease. It was also observed that annealing treatment before aging, enhanced the martensite decomposition and the formation of 2 particles, and correspondingly resulted in more hardness and lower wear resistance. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses confirmed that presence of hard phase 2 particles within soft beta phase was the main reason for wear resistance decrease.

چکیده انگلیسی:

  با توجه به ویژگیهای مورد توجه آلیاژ تیتانیوم Ti-6Al-4V از قبیل نسبت استحکام به وزن بالا و مقاومت به خوردگی مناسب، این آلیاژ استفاده زیادی در صنایع نظامی و پزشکی دارد. در این تحقیق، به بررسی اثر عملیات پیرسازی بر ریزساختار و رفتار سایشی آلیاژ Ti-6Al-4V با استفاده از آزمون سایش پین بر دیسک پرداخته شد. نمونههایی از آلیاژ مورد مطالعه در دو دمای مختلف، 950 و 1050 درجه سانتیگراد مورد عملیات انحلالی قرار گرفتند و سپس نمونهها سرد و پیرسازی شدند. بعضی از نمونهها پیش از پیرسازی، در دمای C 700 آنیل شدند. نتایج نشان داد که رفتار سایشی آلیاژ تیتانیوم مورد مطالعه از قانون آرچارد تبعیت نکرد و پیرسازی علیرغم افزایش سختی، سبب کاهش مقاومت به سایش شد. همچنین مشاهده شد که انجام آنیل میانی پیش از پیرسازی اگرچه سبب تسریع تجزیه فاز مارتنزیت تشکیل شده در مرحله کوئنچ و تشکیل ذرات فاز آلفا (α2) شد و در نتیجه سختی پس از پیرسازی را افزایش داد اما در نهایت کاهش مقاومت به سایش را سبب شد. بررسی میکروسکوپ الکترون روبشی (SEM) و پراش اشعه ایکس (XRD) نشان داد که مهمترین دلیل کاهش مقاومت به سایش با انجام پیرسازی، حضور فاز سخت آلفا (α2) در کنار فاز نرم بتا در ریزساختار نمونه پیرسازی شده بود.

منابع و مأخذ:

[1] Tsuji, N., Tanaka, S. and Takasugi, T., Effect of combined plasma-carburizing and deep-rolling on notch fatigue property of Ti-6Al-4V alloy, Materials Science and Engineering: A, Vol. 499, 2009, pp. 482-488.

[2] Guan, R.G., et al., Effect of microstructure on deformation behavior of Ti–6Al–4V alloy during compressing process, Materials & Design, Vol. 36, 2012, pp. 796-803.

[3] López, J.G., et al., Effect of small temperature variations on the tensile behaviourof Ti-6Al-4V, Procedia Engineering, Vol. 10, 2011, pp. 2330-2335.

[4] Matsumoto, H., et al., Room-temperature ductility of Ti–6Al–4V alloy with α′ martensite microstructure, Materials Science and Engineering: A, Vol. 528, 2011, pp. 1512-1520.

[5] Semiatin, S. L., Bieler, T.R., The effect of alpha platelet thickness on plastic flow during hot working of Ti–6Al–4V with a transformed microstructure, Acta Materialia, Vol. 49, 2001, pp. 3565-3573.

[6] Adamus, J., Lacki, P., Forming of the titanium elements by bending, Computational Materials Science, Vol. 50, 2011, pp. 1305-1309.

[7] Shidid, D.P., et al., Study of effect of process parameters on titanium sheet metal bending using Nd: YAG laser, Optics & Laser Technology, Vol. 47, 2013, pp. 242-247.

[8] Knezevic, M., et al., Modeling bending of α-titanium with embedded polycrystal plasticity in implicit finite elements, Materials Science and Engineering: A, Vol. 564, 2013, pp. 116-126.

[9] Young, L., et al., Dry sliding wear of Ti-6Al-4V alloy in air and vaccum, Transaction of Nonferrous Metals Society of China, Vol. 13, 2003, pp. 1137-1140.

 

[10] Özyürek, D., Tekeli, S., Wear properties of titanium and Ti6Al4V titanium alloy by mechanical milling, High Temperature Materials and Processes, Vol. 30, 2011, pp. 175-180.

[11] Straffelini, G., Molinari, A., Dry sliding wear of Ti–6Al–4V alloy as influenced by the counterface and sliding conditions, Wear, Vol. 236, 1999, pp. 328-338.

[12] Borgioli, F., et al., Improvement of wear resistance of Ti–6Al–4V alloy by means of thermal oxidation, Materials Letters, Vol. 59, 2005, pp. 2159-2162.

[13] Fidan, S., et al., Effect of heat treatment on erosive wear behaviour of Ti6Al4V alloy, Materials Science and Technology, Vol. 29, 2013, pp. 1088-1094.

[14] Molinari, A., et al., Dry sliding wear mechanisms of the Ti6Al4V alloy, Wear, Vol. 208, 1997, pp. 105-112.

[15] Zum Gahr, K.H., Wear by hard particles, Tribology International, Vol. 31, 1998, pp. 587-596.

[16] ASTM E3-01, Standard Practice for Preparation of Metallographic Specimens, ASTM International, West Conshohocken, PA, 2001.

[17] ASTM G99-05(2010), Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, ASTM International, West Conshohocken, PA, 2010.

[18] Froes, F.H., Titanium: Physical metallurgy, processing, and applications, ASM International, 2015, pp. 145.

[19] Yu, H., et al., Influence of heat treatment on hot-rolled sheet forming of Ti6Al4V alloy, International Conference on Materials Science and Application (ICMSA 2015), Thailand, 2015, pp. 65-72.

[20] Gu, K., et al., Effect of cryogenic treatment and aging treatment on the tensile properties and microstructure of Ti6Al4V alloy, Materials Science and Engineering: A, Vol. 584, 2013, pp. 170-176.

[21] Cvijović-Alagić, I., et al., Influence of the heat treatment on the tribological characteristics of the Ti-based alloy for biomedical applications, Tribology in Industry, Vol. 31, 2009, pp. 17-22.

[22] Archard, J., Contact and rubbing of flat surfaces, Journal of Applied Physics, Vol. 24, 1953, pp. 981-988.

[23] Hadke, S., et al., Microstructure evolution and abrasive wear behavior of Ti-6Al-4V alloy, Journal of Materials Engineering and Performance, Vol. 24, 2015, pp. 3969-3981.

[24] Sahoo, R., Jha, B.B., Sahoo, T.K., Dry sliding wear behaviour of Ti–6Al–4V alloy consisting of bimodal microstructure, Transactions of the Indian Institute of Metals, Vol. 67, 2014, pp. 239-245.

[25] Suh, N.P., Sridharan, P., Relationship between the coefficient of friction and the wear rate of metals, Wear, Vol. 34, 1975, pp. 291-299.

[26] Jahanmir, S., Suh, N.P., Mechanics of subsurface void nucleation in delamination wear, Wear, Vol. 44, 1977, pp. 17-38.

[27] Suh, N.P., The delamination theory of wear, Wear, Vol. 25, 1973, pp. 111-124.

[28] Ashby, M.F., Work hardening of dispersion-hardened crystals, Philosophical Magazine, Vol. 14, 1966, pp. 1157-1178.