Evaluating a Novel Approach of Finite Volume Method for Discretization of Seepage Equation in Embankment Dams, Case study: Sonboleroud dam
محورهای موضوعی : Research paperArmin Jalalzadeh 1 , Hamid Reza Vosoughifar 2 , Kamyar Mirabi 3
1 - Department of Civil Engineering, Islamic Azad University, Arbabil-Sarein Branch, Ardabil, Iran
2 - Department of Civil Engineering, Islamic Azad University, South Tehran Branch, Tehran, Iran
3 - Department of Civil Engineering, Islamic Azad University, South Tehran Branch, Tehran, Iran
کلید واژه: Finite volume method, Seepage, Embankment dam, unstructured mesh, Voronoi mesh,
چکیده مقاله :
: This paper was concerned to simulate seepage phenomena (problems) via a novel approach. A high-resolution finite volume method (FVM) was employed to solve the two-dimensional (2D) seepage equations (SEs) using an unstructured grids. Voronoi mesh generation method has been exploited for grid generation method due to its special advantages. In this attempt, to reach to a proper accuracy, solving method obtained on even-odd steps was applied.The model named V-Seep (with MATLAB software) was run under different seepage conditions and then verified by comparing the model outputs with results obtained from different models and measured seepage. The Phase2-2D and Seep-W software which are based on FEM and a code based on FVM with triangular grids. Due to a precise agreement between those output and other software results, the V-Seep could be considered as a reliable method for dealing with seepage problems, especially in embankment dams. In addition, statistical observations indicated a good conformity between the V-Seep and measured data from a case study. The results indicated a higher efficiency and precision of the discrete equations resulted from the Voronoi mesh. Thus, it could be recommended to utilize the Voronoi mesh in the numerical discrete equations.
Abrahim GMS, Parker ,RJ. (2008). Assessment of heavymetal enrichment factors and the degree of contamination in marine sediments from Tamaski Estuary,Auckland,New Zeland. Environment Monitoring Assessment,136:227-238
Afkhami F, Karbassi AR, Nasrabadi T, Vosoogh A. (2013). Impact of oil excavation activities on soil metallic pollution, case study of an Iran southern oil field. Environ Earth Sci, 70:1219–1224.
Allen HH, Chia-Wei H, Tsai-Chi K, Wei- Cheng Wu. (2009). Risk evaluation of green components to hazardous substance using FMEA and FAHP", Expert Systems with Applications, 36: 7142-7147.
Asgharpour M. (2008). multi-criteria decision-making,'Radford Army Ammunition Plant's Environmental Failure Mode and Effects Analysis (EFMEA) process has been developed to provide for the systematic identification, Tracking and communication of environmental risks at the "task level." Tehran University Press, VII, 5.
Dinmohammadi M, Shafiee M. (2013). Fuzzy-FMEA Risk Assessment Approach for Offshore Wind Turbines, International Journal of Prognostics and Health Management, ISSN, PP. 2153-2648.
Hosseinzadeh Kalkhoran M, Hosseinzadeh Sh, Fataei E. (2017). Performing Sensitivity Analysis of Municipal Wastewater Treatment Process Using AHP, Anthropogenic Pollution Journal, Journal of Environmental Science and Technology, 19(4): 283-294.
Josie, SA, Farokhi P. (2012). Environmental Risk Management Kavian Ahvaz Steel Company by using FMEA, Journal of Environmental Planning and Management, 2: 36-25.
Karbassi, AR, Monavari SM, Nabi Bidhendi GR, Nouri J, Nematpour K. ( 2008). Metal pollution assessment of sediment and water in the Shur River. Environmenta Monitoring and Assessment, 147(1-3), 107-116.
Sołek-Podwika, K, Ciarkowska K, Dorota K. (2016). Assessment of the risk of pollution by sulfur compounds and heavy metals in soils located in theproximity of a disused for 20 years sulfur mine (SE Poland). Journal of Environmental ,180:45-458.
Qudsi Pour Sh. (2009). The analytic hierarchy process AHP, Amir Kabir University (Tehran Polytechnic), 230
