Finite Element Analysis and Experimental Factors Influencing Human Face Profile Shaping in Single-Point Gradual Sheet Forming
محورهای موضوعی : Manufacturing process monitoring and controlHamid Mozafari 1 , Mojtaba Moravej 2 , Mahdi Karami Khorramabadi 3
1 - Department of Mechanical Engineering, Faculty of Engineering, Payame Noor University, Tehran, Iran
2 - Department of Mechanical Engineering, Faculty of Engineering, Payame Noor University, Tehran, Iran
3 - Department of Mechanical Engineering, Khorramabad Branch, Islamic Azad University, Khorramabad, Iran
کلید واژه: Finite Element Method (FEM), Gradual Forming Process, Experimental Testing, Tool Path Optimization,
چکیده مقاله :
This article presents a finite element and experimental analysis of the parameters influencing the shaping of the human face profile during the single-point gradual forming process of sheet metal. Single-point progressive forming is a non-traditional technique widely utilized in rapid prototyping and custom part manufacturing. A significant challenge in this process is achieving a greater wall angle while maintaining sufficient depth. The primary objective of this research is to identify and investigate the key factors affecting the accuracy and quality of the forming process. Using finite element analysis software, we conducted detailed modeling of the human face profile and examined the effects of parameters such as sheet material, thickness, and applied forces on the shaping process. The experimental results from practical tests were compared and analyzed against the numerical simulations. This study demonstrates that optimizing these parameters can significantly enhance the quality and accuracy of human face profile shaping, thereby providing a foundation for advancements in the design and production of complex parts. The findings serve as a valuable reference for engineers and designers in industries related to sheet forming and human profile design.
This article presents a finite element and experimental analysis of the parameters influencing the shaping of the human face profile during the single-point gradual forming process of sheet metal. Single-point progressive forming is a non-traditional technique widely utilized in rapid prototyping and custom part manufacturing. A significant challenge in this process is achieving a greater wall angle while maintaining sufficient depth. The primary objective of this research is to identify and investigate the key factors affecting the accuracy and quality of the forming process. Using finite element analysis software, we conducted detailed modeling of the human face profile and examined the effects of parameters such as sheet material, thickness, and applied forces on the shaping process. The experimental results from practical tests were compared and analyzed against the numerical simulations. This study demonstrates that optimizing these parameters can significantly enhance the quality and accuracy of human face profile shaping, thereby providing a foundation for advancements in the design and production of complex parts. The findings serve as a valuable reference for engineers and designers in industries related to sheet forming and human profile design.
[1] Ndip-Agbor, E., Cheng, P., Moser, N., Ehmann, K. and Cao, J. 2019. Prediction of Rigid Body Motion in Multi-pass Single Point Incremental Forming. Journal of Materials Processing Technology. 269: 117-127. doi:10.1016/j.jmatprotec.2019.02.007.
[2] Esmailian, M. and Khalili, K. 2020. Prediction of Tool Force in Two Point Incremental Forming by Slab Analysis. International Journal of Engineering, Transactions B: Applications. 33(11): 2399-2407. doi:10.5829/ije.2020.33.11b.30.
[3] Shakir, G., Hengan, O. and Graham, M. C. 2016. Review on the Influence of Process Parameters in Incremental Sheet Forming. The International Journal of Advanced Manufacturing Technology. 87: 479–499. doi:10.1007/s00170-016-8426-6.
[4] Hou, Y., Myung, D., Park, J. K., Min, J., Lee, H., El-Aty, A. and Lee, M. 2023. A Review of Characterization and Modelling Approaches for Sheet Metal Forming of Lightweight Metallic Materials. Materials. 16: 836-842. doi:10.3390/ma16020836.
[5] Julie, D., White, I., Sahin, N., Ryan, J., Hanne, H. and Jasmien, R. 2021. Insights into the Genetic Architecture of the Human Face. Nature Genetics. 53(1): 45–53. doi:10.1038/s41588-020-00741-7.
[6] Memicoglu, P., Music, O. and Karadogan, C. 2017. Simulation of Incremental Sheet Forming Using Partial Sheet Models. Procedia Engineering, 207: 831-835. doi:10.1016/j.proeng.2017.10.837.
[7] Adams, D. and Jeswiet, J. 2015. Design Rules and Applications of Single-point Incremental Forming. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture. 229(5): 754-760. doi:10.1177/0954405414531426.
[8] Kim, H., Park, T., Esmaeilpour, R. and Pourboghrat, F. 2018. Numerical Study of Incremental Sheet Forming Processes. IOP Conference Series: Journal of Physics. 1063:12017. doi:10.1088/1742-6596/1063/1/012017.
[9] Gupta, P. and Jeswiet, J. 2018. Effect of Temperatures during Forming in Single Point Incremental Forming. International Journal of Advanced Manufacturing Technology. 95 (9-12): 3693-3706. doi:10.1007/s00170-017-1400-0.
[10] Wang, J., Li, L., Zhou, P., Wang, X. and Sun, S. 2019. Improving Formability of Sheet Metals in Incremental Forming by Equal Diameter Spiral Tool Path. The International Journal of Advanced Manufacturing Technology. 101(1-4): 225-234. doi:10.1007/s00170-018-2911-z.
