Mitigation Potential for Improving the Life Cycle of Plastic Products in Indonesia

Iwan Guntoro ¹ ( Research Center for Sustainable Production System and Life Cycle Assessment-National Research and Innovation Agency (BRIN), South Tangerang, Indonesia )
Abdul Rahman ² ( Research Center for Sustainable Production System and Life Cycle Assessment-National Research and Innovation Agency (BRIN), South Tangerang, Indonesia )
Nugraheni Setiastuti ³ ( Research Center for Sustainable Production System and Life Cycle Assessment-National Research and Innovation Agency (BRIN), South Tangerang, Indonesia )
Ari Widiarto ⁴ ( Research Center for Sustainable Production System and Life Cycle Assessment-National Research and Innovation Agency (BRIN), South Tangerang, Indonesia )
Fitri Kurniawati ⁵ ( Research Center for Advanced Materials, National Research and Innovation Agency (BRIN), South Tangerang, Indonesia )
Fathiah Ulfah ⁶ ( Research Center for Sustainable Production System and Life Cycle Assessment-National Research and Innovation Agency (BRIN), South Tangerang, Indonesia )
Robby Marlon Brando ⁷ ( National Research and Innovation Agency )
Surat Indrijarso ⁸ ( Research Center for Sustainable Production System and Life Cycle Assessment-National Research and Innovation Agency (BRIN), South Tangerang, Indonesia )
Amar Makruf Tinulad Fil Ardli ⁹ ( The Energy Conversion and Conservation Research Center, National Research and Innovation Agency (BRIN), South Tangerang, Indonesia )
Adi Akhmadi Pamungkas ¹⁰ ( Directorate for Technology Transfer and Audit System, National Research and Innovation Agency (BRIN), Central Jakarta, Indonesia )
Muhammad Amirullah Makmunsyah Oktaufik ¹¹ ( Research Center for Sustainable Production System and Life Cycle Assessment-National Research and Innovation Agency (BRIN), South Tangerang, Indonesia )

تاریخ ارسال : 1403/08/21 تاریخ تایید : 1403/12/19

کلید واژه: Improvement of plastic product life cycle, Life Cycle Engineering (LCE), Hotspot Causes, Mitigation Potential,

چکیده مقاله :

The widespread use of plastic products in society has been proven to have severe impacts, such as global warming and other toxic impacts. Life cycle improvement can reduce the environmental impact of manufactured products. Life cycle improvement is an effort to reduce the amount and quality of emissions generated from raw material extraction to post-use product disposal. Mitigation efforts to improve the life cycle of manufactured products can contribute to achieving the SDGs. This study aims to find the potential for mitigating improvements to the life cycle of Indonesian plastic products using the Life Cycle Engineering (LCE) approach. Product life cycle hotspot data was identified from a review of 20 selected articles containing the results of the Life Cycle Assessment (LCA) study of Indonesian plastic products through the Systematic Literature Review (SLR). The life cycle of plastic products can be improved by tracking hotspot causes and finding mitigation options in an integrated manner. The life cycle of Indonesian plastic products analyzed can be identified in cycle components: collection, shredding, raw materials, transportation, pelletizing, production, packaging, distribution, EOL handling, and production avoidance. The results show that hotspot causes include the nature of plastic raw materials, electricity use, fuel oil (BBM) use, and unmanaged plastic waste. The potential for mitigation of improving the life cycle of Indonesian plastic products is identified in 16 options in five groups, namely: changing raw materials, efficiency of electricity use, efficiency of fuel use, improvement of plastic waste handling, and demand control.

چکیده انگلیسی :

منابع و مأخذ:

Abidin, A. Z., Steven, S., Trirahayu, D. A., Yemensia, E. V., Soekotjo, E. S. A., Sasongko, N. A., & Nathania, M. (2023). Is bio-labeled material always environmentally friendly? Investigation of 5 types of shopping bags in Indonesia by impact assessment. IOP Conference Series: Earth and Environmental Science, 1268(1), 012039. https://doi.org/10.1088/1755-1315/1268/1/012039

Alting, L. (1995). Life Cycle Engineering and Design.

Amirudin, A., Inoue, C., & Grause, G. (2022). Analyzing Polyethylene Terephthalate Bottle Waste Technology Using an Analytic Hierarchy Process for Developing Countries: A Case Study from Indonesia. Recycling, 7(4), 58. https://doi.org/10.3390/recycling7040058

Chen, M., Li, R., Runge, T., Feng, J., Hu, S., & Shi, Q.-S. (2019). Degradable polymeric package from whole cell wall biomass. Materials Today Sustainability, 3–4, 100008. https://doi.org/10.1016/j.mtsust.2019.100008

Deng, J., Du, L., Xia, J., Li, Y., & Cai, X. (2021). Eco-Design Learning Framework on Integrating Life Cycle Assessment Into Engineering Courses for Sustainability Competency Enhancement. IEEE Access, 9, 160596–160606. https://doi.org/10.1109/ACCESS.2021.3132335

Erdiwansyah, E., Mahidin, M., Husin, H., Nasaruddin, N., Khairil, K., Zaki, M., & Jalaluddin, J. (2021). Investigation of availability, demand, targets, and development of renewable energy in 2017–2050: A case study in Indonesia. International Journal of Coal Science & Technology, 8(4), 483–499. https://doi.org/10.1007/s40789-020-00391-4

Evangelista, A. (2019). Evaluasi Dampak Lingkungan Pada Proses Produksi Air Minum Dalam Kemasan (Amdk) Ayia Dengan Metode Life Cycle Assessment (Lca).

Firdaus Pambudi, N., Dowaki, K., & Adhiutama, A. (2016). Integrated Index in Consideration of Appropriate Plastic Recycling System in Waste Bank Operation. MATEC Web of Conferences, 78, 01018. https://doi.org/10.1051/matecconf/20167801018

Fitri S, A., M, B. A. J., Armisan, C., Putrawan, D., Ramadhan, G., Pratama, P., W, R. C., Aminah, S., H, T. E., & S, L. E. (2024). Pengelolaan Sampah Plastik Melalui Pembentukan Lembaga Bank Sampah Di Desa Kidang Lombok Tengah. Jurnal Wicara Desa, 2(2), 21–26. https://doi.org/10.29303/wicara.v2i2.4205

Fivga, A., & Dimitriou, I. (2018). Pyrolysis of plastic waste for production of heavy fuel substitute: A techno-economic assessment. Energy, 149, 865–874. https://doi.org/10.1016/j.energy.2018.02.094

Ghaffar, Z. M. A., Syamsih, M., Widyati, N. A., & Wasonowati, C. (2021). Pengelolahan Bank Sampah dalam Meningkatkan Perekonomian Masyarakat di Desa Banangkah Kecamatan Burneh Kabupaten Bangkalan.

Hauschild, M. Z., Kara, S., & Røpke, I. (2020). Absolute sustainability: Challenges to life cycle engineering. CIRP Annals, 69(2), 533–553. https://doi.org/10.1016/j.cirp.2020.05.004

Ibnu, A. S. (2019). Evaluation On Productivity And Environmental Impact Of Polyethylene Terephtalate (Pet) Drinking Bottle Production Process Using Life Cycle Assessment And Optimizing Using Eco-Efficiency In Economic Mindset (At Pt. Tirta Investama – Aqua Danone).

Ilhamdika, M. (2017). UNIVERSITAS BRAWIJAYA FAKULTAS TEKNIK MALANG 2017.

Irwanto, I., & Wibowo, T. U. S. H. (2023). Sosialisasi Dalam Pengelolaan Sampah Plastik Melalui Bank Sampah Desa Panamping Kecamatan Bandung Kabupaten Serang. Prosiding Seminar Nasional Pengabdian Masyarakat, 1. https://doi.org/10.61142/psnpm.v1.69

Irzalinda, A. D., & Ardi, R. (2020). Environmental Impact Evaluation of Flexible Plastic Packaging using Life Cycle Assessment Approach. Proceedings of the 3rd Asia Pacific Conference on Research in Industrial and Systems Engineering 2020, 198–202. https://doi.org/10.1145/3400934.3400971

Jamwal, A., Agrawal, R., & Sharma, M. (2021). Life cycle engineering: Past, present, and future. In Sustainable Manufacturing (pp. 313–338). Elsevier. https://doi.org/10.1016/B978-0-12-818115-7.00012-2

Janahi, N. A., Durugbo, C. M., & Al-Jayyousi, O. R. (2021). Eco-innovation strategy in manufacturing: A systematic review. Cleaner Engineering and Technology, 5, 100343. https://doi.org/10.1016/j.clet.2021.100343

Jeswiet, J. (2003). A definition for life cycle engineering. SPringer.

Jupesta, J. (2010). Impact of the Introduction of Biofuel in the Transportation Sector in Indonesia. Sustainability, 2(6), 1831–1848. https://doi.org/10.3390/su2061831

Kara, S., Herrmann, C., & Hauschild, M. (2023). Operationalization of life cycle engineering. Resources, Conservation and Recycling, 190, 106836. https://doi.org/10.1016/j.resconrec.2022.106836

Karuana, F., Kaddihani, W., Ghazidin, H., Wimada, A. R., Solikhah, M. D., Komalasari, C., Pratomo, T. B., Prida, H., & Kuswa, F. M. (2020). Pengaruh Penggunaan Campuran Biodiesel (B30) Terhadap Konsumsi Bahan Bakar Pada Kendaraan Di Atas > 3.5 Ton.

Kasznik, D. (2023). The end of plastic? The EU’s directive on single-use plastics and its implementation in Poland.

kellens, karel. (2018). Life Cycle Engineering. In: Chatti, S., Tolio, T. (eds). CIRP Encyclopedia of Production Engineering. https://doi.org/10.1007/978-3-642-35950-7_6609-

Khairona, M. A. (2019). Analisis Kategori Dampak Lingkungan Proses Pembuatan Cup Polystyrene Menggunakan Metode Life Cycle Assessment.

Kuclourya, T., Monroy, R., Cuan-Urquizo, E., Roman-Flores, A., & Ahmad, R. (2022). Scientometric analysis and critical review of fused deposition modeling in the plastic recycling context. Cleaner Waste Systems, 2, 100008. https://doi.org/10.1016/j.clwas.2022.100008

Laurence, & Kasena, J. (2018). Case study of life cycle assessment on battery container. E3S Web of Conferences, 74, 05005. https://doi.org/10.1051/e3sconf/20187405005

Lundquist, L. (2002). Life cycle engineering of plastics technology, economy, and the enviroment. In Life cycle engineering of plastics technology, economy, and the enviroment (1st ed., Vol. 1). Elsevier.

Martini, T., Octavian, A., Mumpuni, T., Abimanyu, H., Susanto, H., Purwendah, E. K., Rahman, T., Susilawati, H. L., Oktaufik, M. A., & Erny, F. M. (2024). Circular Economy for Sustainable Management of Plastic Waste to Produce Liquid Fuel and the Environmental Impact of the Whole Life Cycle (Case Study). 11(03).

Mutiara, S. D. (2018). Penerapan Lean Thinking Dan Life Cycle Assessment (Lca) Untuk Meningkatkan Eco-Efficiency Pada Produk Backsheet Diapers.

Nashir, A. K., Hendrayani, Y., & Ma’arif, D. (2020). Ipteks Bagi Masyarakat (Ibm) Pemberdayaan Masyarakat Dalam Pengelolaan Bank Sampah Plastik Di Lingkungan Yayasan Al Kamilah Serua Depok. Abdimas Unwahas, 5(1). https://doi.org/10.31942/abd.v5i1.3338

Neo, E. R. K., Soo, G. C. Y., Tan, D. Z. L., Cady, K., Tong, K. T., & Low, J. S. C. (2021). Life cycle assessment of plastic waste end-of-life for India and Indonesia. Resources, Conservation and Recycling, 174, 105774. https://doi.org/10.1016/j.resconrec.2021.105774

Nicholson, S. R., Rorrer, N. A., Carpenter, A. C., & Beckham, G. T. (2021). Manufacturing energy and greenhouse gas emissions associated with plastics consumption. Joule, 5(3), 673–686. https://doi.org/10.1016/j.joule.2020.12.027

Ningrum, D. A. P., & Afiuddin, A. E. (2018). Kajian Dampak Lingkungan pada Proses Extruder Menggunakan Metode Life Cycle Assessment (LCA) (PT X Sidoarjo). 2623.

Noya, M. C. G. (2018). UNIVERSITAS BRAWIJAYA FAKULTAS TEKNIK MALANG 2018.
Pengesahan Rencana Usaha Penyediaan Tenaga Listrik PT.Perusahaan Listrik Negara Tahun 2021 Sampai Dengan Tahun 2030, 188.K/HK/02/MEM.L/2021 (2021).

Peta Jalan Pengurangan Sampah oleh Produsen, P.75/MENLHK/SETJEN/KUM.1/2019 54 (2019).

Pimenta, S., & Pinho, S. T. (2011). Recycling carbon fibre reinforced polymers for structural applications: Technology review and market outlook. Waste Management, 31(2), 378–392. https://doi.org/10.1016/j.wasman.2010.09.019

Puspita, S. D., Sodri, A., & Utomo, S. W. (2022). Environmental Impact Assessment on Plastic Waste Recycling Business in Bengkulu City, Indonesia. IOP Conference Series: Earth and Environmental Science, 1111(1), 012022. https://doi.org/10.1088/1755-1315/1111/1/012022

Rahayuningtyas, C. M., Sodri, A., & Astuti, L. T. M. (2023). Peran Bank Sampah Dalam Pengelolaan Sampah Plastik Di Depok. EnviroScienteae, 19(2), 114. https://doi.org/10.20527/es.v19i2.15163

Rosmiati, V. & Hadiyanto. (2020). Life Cycle Assessment and Energy Efficiency from Industry of Plastic Waste Recycling. E3S Web of Conferences, 202, 06015. https://doi.org/10.1051/e3sconf/202020206015

Saputra, A., Satwikanitya, P., Ajie, B., & Pramitaningrum, E. (2023). Comparative life cycle assessment of plastic jerry cans: A case study production in plastic workshop of Politeknik ATK Yogyakarta. 060004. https://doi.org/10.1063/5.0105685

Saputra, S. Y., & Hanafi, J. (2017). The Importance of Data Quality in Using LCA Approach as A Decision Supporting Tool: Comprative Case Study between Injection Moulding Machines in Processing Polypropylene. Indonesian Journal of Life Cycle Assessment and Sustainability, 1(2). https://doi.org/10.52394/ijolcas.v1i2.30

Semba, T., Sakai, Y., Sakanishi, T., & Inaba, A. (2018). Greenhouse gas emissions of 100% bio-derived polyethylene terephthalate on its life cycle compared with petroleum-derived polyethylene terephthalate. Journal of Cleaner Production, 195, 932–938.
https://doi.org/10.1016/j.jclepro.2018.05.069

Setiastuti, N., Guntoro, I., Rahman, A., & Hutapea, R. (2023). eLife Cycle Assessment (LCA) of Plastic Products to Support the Sustainable Develepment Goals/SDGS in Indonesia: Literature Review. In T. Proceedings of the International Conference of Tropical Studies and Its Applications (ICTROPS 2022) (Vol. 31, pp. 219–232). Atlantis Press International BV. https://doi.org/10.2991/978-94-6463-180-7_24

Sinaga, R. Y. H., Mulyono, Vicarneltor, D., & Radini, F. A. (2023). Environmental impact study on conversion of multilayer metallized packaging to paving blocks with a Life Cycle Assessment (LCA) approach. IOP Conference Series: Earth and Environmental Science, 1201(1), 012036. https://doi.org/10.1088/1755-1315/1201/1/012036

Sirait, M. (2017). Evaluasi Penggunaan Energi dan Emisi Gas CO2 pada Rantai Pasok Daur Ulang Sampah Plastik.

Subagyo, S., Moh. Yanuar, J. P., Bambang, P. N., & Saleh, A. (2021). Substitution of energy needs with renewable energy sources. IOP Conference Series: Earth and Environmental Science, 927(1), 012032. https://doi.org/10.1088/1755-1315/927/1/012032

Sutanto, H., & Rumende, K. (2022). Life Cycle Assessment of Plastic Componentsin the Production of Automotive Filter. Polish Journal of Environmental Studies, 31(3), 2851–2860. https://doi.org/10.15244/pjoes/144100

Tiogana, V. (2020). LIFE CYCLE ASSESSMENT (LCA) SAMPAH PLASTIK DI JAKARTA.

Ulfah, M., Widodo, S., Cholifah, N., & Patonah, S. (2023). Inovasi Program Bank Sampah Hasil Makmur Jaya Karangtempel Melalui Pengolahan Sampah Plastik sebagai Proses Community Based Participation. E-Dimas: Jurnal Pengabdian kepada Masyarakat, 14(1), 195–200. https://doi.org/10.26877/e-dimas.v14i1.14669

Utami, A. W., Supartono, W., & Wikarta, J. M. (2015). LIFE CYCLE ASSESSMENT PADA PRODUKSI BENANG POLYESTER. LIFE CYCLE ASSESSMENT.

Wahono, J., Djamari, D. W., Nurhadiyanto, M. A., & Azmi, A. L. S. (2021). Green prosperity: A natural-based solution for rural electrification in Indonesia. IOP Conference Series: Earth and Environmental Science, 749(1), 012023. https://doi.org/10.1088/1755-1315/749/1/012023

Wenzel, H., Hauschild, M. Z., Jorgensen, J., & Alting, L. (1994). Environmental tools in product development. Proceedings of 1994 IEEE International Symposium on Electronics and The Environment, 100–105. https://doi.org/10.1109/ISEE.1994.337295

Widyaningsih, N. (2019). Life Cycle Assessment Approach on Food Packaging to Build Sustainable Consumption Awareness in Developing Countries. Indonesian Journal of Life Cycle Assessment and Sustainability. https://doi.org/10.52394/ijolcas.v2i2.52

Yani, M., & Warsiki, E. (2013). PENILAIAN DAUR HIDUP BOTOL PET (POLYETHYLENA TEREPHTALATE) PADA PRODUK MINUMAN. 13(2).

Yola, M. (2013). Analisis Sustainability Packaging dengan Metode Life Cycle Assessment (LCA).

Mitigation Potential for Improving the Life Cycle of Plastic Products in Indonesia

سکوی نشر دانش

پیوندهای سایت

مراکز مرتبط

پشتیبانی

صفحات رسمی