Friendly Environmental Geopolymers and Its Application: A Short Review
محورهای موضوعی : Journal of Environmental Friendly Materialsshahram mahboubizadeh 1 , sina vaseghi 2 , mani amirian 3
1 - Department of Materials science and Engineering, Faculty of Engineering, Science and Research branch, Islamic Azad University, Tehran 1477893855, Iran
2 - Department of Materials science and Engineering, Science and Research branch, Islamic Azad University, Tehran, Iran
3 - Department of Civil Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran.
کلید واژه: Geopolymer, Waste Material, Alumina-Silicate, Cement, Concrete,
چکیده مقاله :
One of the concerns of today's industrial societies is to achieve sustainable development through the reduction of waste materials or the decrease in the emission of greenhouse gases such as CO2 which today is stated in many international agreements and requirements for it has been concluded by the agreements between the countries of the world, and due to the increasing trend of global warming it is possible to create more encouraging or binding agreements, therefore many researchers are trying to achieve these goals. There are various ways to reduce the production of greenhouse gases during the construction of parts and building materials, and a significant part of them have been directed towards the production of a new type of environmentally friendly material called geopolymers. This category of materials, which have the ability to use waste materials as raw materials for their construction due to their very good mechanical and chemical properties, has been able to find various applications that, due to their similarity to concrete structures, are suitable alternatives for them as structures and building materials. In the following research, an attempt has been made to study geopolymers from the point of view of their formation, applications and properties.
One of the concerns of today's industrial societies is to achieve sustainable development through the reduction of waste materials or the decrease in the emission of greenhouse gases such as CO2 which today is stated in many international agreements and requirements for it has been concluded by the agreements between the countries of the world, and due to the increasing trend of global warming it is possible to create more encouraging or binding agreements, therefore many researchers are trying to achieve these goals. There are various ways to reduce the production of greenhouse gases during the construction of parts and building materials, and a significant part of them have been directed towards the production of a new type of environmentally friendly material called geopolymers. This category of materials, which have the ability to use waste materials as raw materials for their construction due to their very good mechanical and chemical properties, has been able to find various applications that, due to their similarity to concrete structures, are suitable alternatives for them as structures and building materials. In the following research, an attempt has been made to study geopolymers from the point of view of their formation, applications and properties.
[1] Srividya T, Kannan Rajkumar PR, Sivasakthi M, Sujitha A, Jeyalakshmi R (2022) A State-of-the-Art on Development of Geopolymer Concrete and its Field App.Case Stud. Const. Mater.
[2] Koleżyński A, Król M, Żychowicz M, The structure of geopolymers – Theoretical studies. J. Mol. Struct. 2018; 1163:465–471.
[3] Rajamane NP, Nataraja MC, Lakshmanan N, An Introduction to Geopolymer Concrete. Indian Concr. J. 2021; 85:25–28.
[4] Singh NB, Middendorf B, Geopolymers as an alternative to Portland cement: An overview. Constr Build Mater. 2020.
[5] Zain H, Abdullah MMAB, Hussin K, Ariffin N, Bayuaji R, Review on Various Types of Geopolymer Materials with the Environ. Impact Assessment. MATEC Web Conf. 2017.
[6] El Alouani M, Saufi H, Aouan B, et al, A comprehensive review of synthesis, characterization, and App. of Aluminosilicate Materials-Based Geopolymers. Environ. Adv. 2024.
[7] Almutairi AL, Tayeh BA, Adesina A, Isleem HF, Zeyad AM, Potential App. of geopolymer concrete in construction: A review. Case Stud. Constr. Mater. 2021.
[8] Khan MSH, Castel A, Akbarnezhad A, Foster SJ, Smith M, Utilisation of Steel Furnace Slag Coarse Aggregate in a Low Calcium Fly ash Geopolymer Concrete. Cem. Concr. Res. 2016; 89:220–229.
[9] Assaedi H, Shaikh FUA, Low IM, Influence of Mixing Methods of Nano Silica on the Microstructural and Mechanical Properties of Flax Fabric Reinforced Geopolymer Composites. Constr. Build Mater. 2016; 123:541–552.
[10] Kabir SMA, Alengaram UJ, Jumaat MZ, Yusoff S, Sharmin A, Bashar II, Performance Evaluation and Some Durability Characteristics of Environmental Friendly Palm Oil Clinker Based Geopolymer Concrete. J. Clean. Prod. 2017; 161:477–492.
[11] Cheng ZQ, Zhao R, Yuan Y, Li F, Castel A, Xu T, Ageing Coefficient for Early Age Tensile Creep of Blended Slag and Low Calcium Fly ash Geopolymer Concrete. Constr. Build Mater. 2020.
[12] Mehta A, Siddique R, Sustainable Geopolymer Concrete Using Ground Granulated Blast Furnace Slag and Rice Husk ash: Strength and Permeability Properties. J. Clean. Prod. 2018; 205:49–57.
[13] Sharmin A, Alengaram UJ, Jumaat MZ, Yusuf MO, Kabir SMA, Bashar II, Influence of Source Materials and the Role of Oxide Composition on the Performance of Ternary Blended Sustainable Geopolymer Mortar. Constr. Build Mater. 2017; 144:608–623.
[14] Saeed A, Najm HM, Hassan A, Sabri MMS, Qaidi S, Mashaan NS, Ansari K, Properties and App. of Geopolymer Composites: A Review Study of Mechanical and Microstructural Properties. Mater. 2022.
[15] Korhonen H, Timonen J, Suvanto S, Hirva P, Mononen K, Jääskeläinen S, The Mechanical Properties of Geopolymers from Different Raw Materials and the Effect of Recycled Gypsum. Inorganics. 2023.
[16] Jwaida Z, Dulaimi A, Mashaan N, Othuman Mydin MA, Geopolymers: The Green Alternative to Traditional Materials for Engineering Applications. Infrastructures. 2023.
[17] Valente M, Sambucci M, Sibai A, Geopolymers vs. Cement Matrix Materials: How Nanofiller Can Help a Sustainability Approach for Smart Construction Applications—a Review. Nanomater. 2021.
[18] Lahoti M, Tan KH, Yang EH, A Critical Review of Geopolymer Properties for Structural Fire-Resistance Applications. Constr Build Mater. 2019; 221:514–526.
[19] Gunasekara C, Law DW, Setunge S, Sanjayan JG, Zeta potential, gel formation and compressive strength of low calcium fly ash geopolymers. Construct. Build Mater. 2015; 95:592–599.
[20] Phoo-Ngernkham T, Chindaprasirt P, Sata V, Sinsiri T, High calcium fly ash geopolymer containing diatomite as additive. Indian J. Eng. Mater. Sci. 2013; 20:310–318.
[21] Sithole NT, Mashifana T, Geosynthesis of building and construction materials through alkaline activation of granulated blast furnace slag. Construct. Build Mater. 2020.
[22] Hounsi AD, Lecomte-Nana GL, Djétéli G, Blanchart P, Kaolin-based geopolymers: Effect of mechanical activation and curing process. Construct Build Mater. 2013; 42:105–113.
[23] Aouan B, Alehyen S, Fadil M, EL Alouani M, Khabbazi A, Atbir A, Taibi M, Compressive Strength Optimization of Metakaolin‐Based Geopolymer by Central Composite Design. Chem. Data Collect. 2021.
[24] Zhou S, Lu C, Zhu X, Li F, Upcycling of Natural Volcanic Resources for Geopolymer: Comparative Study on Synthesis, Reaction Mechanism and Rheological Behavior. Construct Build Mater. 2021.
[25] Banihashemi A, Tol N, Hadian A, Asefnejad A, Mahboubizadeh S, Targeting Geopolymer Properties for Use in Bone Tissue Eng.
[26] Dawczyński S, Krzywon R, Górski M, Dubińska W, Samoszuk M, Geopolymer Concrete - Applications in Civil Eng. 2017.
[27] Kan L li, Wang W Song, Liu W Dong, Wu M, Development and Characterization of Fly Ash Based PVA Fiber Reinforced Engineered Geopolymer Composites Incorporating Metakaolin. Cem. Concr. Compos. 2020.
[28] Lao JC, Xu LY, Huang BT, Dai JG, Shah SP, Strain-hardening Ultra-High-Performance Geopolymer Concrete (UHPGC): Matrix Design and Effect of Steel Fibers. Compos Commun. 2022.
[29] Akhtar N, Ahmad T, Husain D, Majdi A, Alam MT, Husain N, Wayal AKS, Ecological Footprint and Economic Assessment of Conventional and Geopolymer Concrete for Sustainable Construction. J. Clean Prod. 2022.
[30] Oyebisi S, Olutoge F, Kathirvel P, Oyaotuderekumor I, Lawanson D, Nwani J, Ede A, Kaze R, Sustainability Assessment of Geopolymer Concrete Synthesized by Slag and Corncob ash. Case. Stud. Construct. Mater. 2022.
[31] Oluwafemi J, Ofuyatan O, Adedeji A, Bankole D, Justin L, Reliability Assessment of Ground Granulated Blast Furnace Slag/ Cow Bone ash- Based Geopolymer Concrete. J. Build Eng. 2023.
[32] Ren B, Zhao Y, Bai H, Kang S, Zhang T, Song S, Eco-Friendly Geopolymer Prepared From Solid Wastes: A Critical Rev. Chemosphere. 2021.
[33] Elgarahy AM, Maged A, Eloffy MG, Zahran M, Kharbish S, Elwakeel KZ, Bhatnagar A, Geopolymers as sustainable eco-friendly materials: Classification, synthesis routes, and applications in wastewater Treatment. Sep. Purif. Technol. 2023.
[34] Giannopoulou I, Robert PM, Sakkas KM, Petrou MF, Nicolaides D, High Temperature Performance of Geopolymers Based on Construction and Demolition Waste. J. Build Eng. 2023.
[35] Zawrah MF, Sadek HEH, Ngida REA, Sawan SEA, El-Kheshen AA, Effect of Low-Rate Firing on Physico-Mechanical Properties of Unfoamed and Foamed Geopolymers Prepared From Waste Clays. Ceram. Int. 2022; 48:11330–11337.
