شبیه سازی و بررسی پارامترهای موثر بر کاهش توان مصرفی در مدارهای ضرب کننده با استفاده از فناوری ترانزیستورهای CNT
محورهای موضوعی : مهندسی الکترونیک
عبدالرسول مقاتلی
1
(دانشجوی ارشد دانشگاه آزاد واحد بوشهر)
حسین مومن زاده
2
(عضو هیات علمی دانشگاه آزاد واحد بوشهر)
محمد نادر کاکایی
3
(هیت علمی دانشگاه ازاد واحد بوشهر)
کلید واژه: ترانزیستور نانو لوله کربنی, ضرب کننده آنالوگ چهار ربعی, مد جریان, مدار مجذور کننده جریان, Carbon nanotube transistor, quadruple analog multiplier, current mode, current square circuit,
چکیده مقاله :
در این مقاله، به ارائه یک ضرب‌کننده آنالوگ چهار ربعی مد جریان جدید برپایه ترانزیستور های نانو لوله کربنی می‌پردازیم. مدارهای مجذورکننده جریان که اخیرا طراحی‌شده است و آینه جریان، که در ولتاژ تغذیه پایین (1V) کار می‌کنند، اجزای اساسی در تحقق معادلات ریاضی هستند. در این پژوهش مدار ضرب‌کننده، با استفاده از فناوری CNTFET ،32 نانو متر طراحی می‌شود و برای معتبر ساختن عملکرد مدار، ضرب‌کننده ارائه‌شده در شبیه‌ساز HSPICE شبیه‌سازی شده است. نتایج حاصل از شبیه‌سازی نشان می دهد که مدار قابلیت عملکرد مطلوب را تا فرکانس 2 گیگا هرتز ، مصرف توان ماکزیمم 3.7464µw و همچنین دارای THD 0.226043% می باشد.
Analog multipliers are useful blocks used in implementing functions such as automatic control, modulation, detectors, adaptive filters, and neural networks. In this paper, we present a new four-quadratic analog multiplier based on carbon nanotube transistors. Newly designed current square circuits and a current mirror, all operating at low voltage (1V), are essential components in realizing mathematical equations. The multiplier circuit is designed using CNTFET technology, 32 nm, and the multiplier provided in the HSPICE simulator is simulated to validate the circuit performance. The simulation results showed that the circuit has the desired performance up to a frequency of 2 GHz and shows a maximum power consumption of 3.7464uw and also has a THD of 0.226043%.
[1] YK. Seng, SS. Rofail, “Design and analysis ofa ±1 V CMOS foµr-qµadrant analogµemµltiplier,” in Proc. IEEE Circµits Dev Syst, 1998.
[2] T. Suzuki, T. Oura, T. Yoneyama, H. Asai, “A new CMOS 4Q-multiplier using linearand saturation regions complementally,”InProc. of solid-state circuitsconference (ESSCIRC), 2002.
[3] K Tanno, O. Ishizuka, Z. Tang, “Four-quadrant CMOS current-mode multiplierindependent ofdevice parameters, ” IEEE Trans Circuit Syst II, vol.47,no 5, pp. 473–7, 2000.
[4] A. Naderi, A. Khoei, K. Hadidi, H.Ghasemzadeh, “A new high speed and low powerfour-quadrant CMOS analog multiplier in current-mode,” AEu – Int J ElectronCommun , vol. 63, no. 9, pp. 769–75, 2009.
[5] A. J. Lopez-Martin, A. Carlosena, “Current-modemultiplier/divider circuits basedon the MOS translinear principle,” Analog Integr CircuitsSignal Process, 2001.
[6] A. J. Lopez-Martin, C.A. De La Cruz Bias, J. Ramirez-Angulo, R.G. Carvajal, “Compact low-voltage CMOS current-mode multiplier/divider, ” In Proc. IEEE international symposium on circuits and systems (ISCAS), 2010. pp. 1583–6.
[7] J.Antonio Lopez-Marti, C. A. De La Cruz Blas, J. Ramirez-Angulo, R.G.Carvajal, “Current-Mode CMOS Multiplier/Divider Circuit Operating in Linear/Saturation Regions,” Analog Integr Circ Sig Process,” vol. 66 , no 10, pp. 299-302, 2010.
[8] F. Pr´egaldiny, J. Baptiste Kammerer , C. Lallement,” Compact Modeling and Applications of CNTFETs for Analog and Digital Circuit Design”, in proc. 13th IEEE International Conference on Electronics, Circuits and Systems, 2006, pp. 4244-0395.
[9] L. mao peng , Z. zhang ,s. wang, “Carbon Nanotube Electronics Recent Advances,” in J Materialstoday, vol.17, no. 9, pp.433-442, November 2014 .
[10] I. Makwana, V. Sheth, “A Low Power High Bandwidth Four Quadrant Analog Multiplier in 32 Nnmcnfet Technology,” International Journal of VLSI design &Communication Systems (VLSICS), vol. 3, no. 2, pp. 73-83, April 2012.
[11] Y.Bin. Kim, “Integrated Circuit Design Based on Carbon Nanotube Field Effect Transistor,” Iransactions on Electrical and Electronic Materials, vol. 12, no. 5, pp. 175-188 , October 2011.
[12] Rodney S.Ruoff, DongQian, WingKam Liu, C.R.Physique, 4, 2003, 993
[13] H. Raffi-Tabar, Physics Reports, 390, 2004, 235.
[14] R.Satio, M. S. Dresselhaus, G. Dresselhaus, “Physical Properties Of Carbon Nanotubes,” Imperial College Press ISBN 1-86094-093-5, 1998.
[15] J. Peder Dahl, “Introduction to the Quantum World of Atoms and Molecules, ” World Scientific Publishing Company, 9810245653, 2001.
[16] M.H. Hashiesh, S.A. Mahmoud, A.M.Soliman, “New four-quadrant CMOS currentmode and voltage-mode multipliers, Analog Integr Circuits Signal Process, vol. 45, no 3, pp. 295–307, 2005.
[17] S. Minaei, E.Yuce, “New squarer circuits and a current-mode full-wave rectifier topology suitable for integration,” in J Radio Eng, vol. 19,no. 4 pp. 657–61, 2010.
[18] R.Hidayat, K.Dejhan, P.Moungnoul, Y.Miyanaga, “A GHz simple CMOS squarercircuit, ” in proc. IEEE International Symposium on Communications and Information Technologies (ISCIT), 2008, pp. 539–42.
[19] K.M. Al-Tamimi, M. A.Al-Absi, “An ultra-low power high accuracy current-mode CMOS squaring circuit,” In proc. International Conference ofElectrical and Electronics Engineering, 2012. pp. 872–4.
[20] S. Wisetphanichkij, N.Singkrajom, M.Kumngern, K.Dejhan, “A low-voltage CMOS current squarer circuit. ” in proc. IEEE International Symposium on Communications and Information Technology (ISCIT), 2005, pp. 271–4.
[21] M.H. Danesh, E. Mahmoudian, A.Emami Fard ” A new current-mode squarer circuit for RMS-to-DC converter,” Int J Eng Innovative Technol (IJEIT) , vol.3, no. 2, 2013
[22] M. Kumngern, K. Dejhan, “Versatile dual-mode class-AB four-quadrant analog multiplier,” Int J Signal Process, vol. 2, no. 4, 2005.
[23] C.A.De La Cruz-Blas, A.J.Lopez-Martin, A.Carlosena, “1.5 V four-quadrant CMOS current multiplier/divider,” Electron Lett, vol. 39, no. 5, pp. 434–6, 2003.
[24] C. Popa, “Improved accuracy current-mode multiplier circuits with applications in analog signal processing,” IEEE Trans Very Large Scale Integr (VLSI) Syst, vol.22, no. 2, pp. 443–7, 2014.
[25] A.Ravindran, K.Ramarao, E.Vidal, M.Ismail, “Compact low voltage four quadrant CMOS current multiplier,” Electron Lett, vol. 37, no. 24, pp. 1428–9, 2001.
[26] P.Prommee, M. Somdunyakanok, M. Kumngern, K. Dejhan, “Single low-supply current-mode CMOS analog multiplier circuit,” in proc.IEEE International Sym-posium on Communications and Information Technologies, ISCIT. 2006. pp. 1101–4.
[27] V. Oliveira, N.Oki, “Low voltage four-quadrant current multiplier: an improved topology for n-well CMOS process, ” In proc International Conference on Design & Technology of Integrated Systems in Nanoscale Era, 2007. pp. 52–5.
[28] N. Beyraghi, A. Khoei, “CMOS design of a low power and high precision four-quadrant analog multiplier,” AEU - International Journal of Electronics and Communications, vol. 63, no. 1, pp.400-7, 2015.
_||_[1] YK. Seng, SS. Rofail, “Design and analysis ofa ±1 V CMOS foµr-qµadrant analogµemµltiplier,” in Proc. IEEE Circµits Dev Syst, 1998.
[2] T. Suzuki, T. Oura, T. Yoneyama, H. Asai, “A new CMOS 4Q-multiplier using linearand saturation regions complementally,”InProc. of solid-state circuitsconference (ESSCIRC), 2002.
[3] K Tanno, O. Ishizuka, Z. Tang, “Four-quadrant CMOS current-mode multiplierindependent ofdevice parameters, ” IEEE Trans Circuit Syst II, vol.47,no 5, pp. 473–7, 2000.
[4] A. Naderi, A. Khoei, K. Hadidi, H.Ghasemzadeh, “A new high speed and low powerfour-quadrant CMOS analog multiplier in current-mode,” AEu – Int J ElectronCommun , vol. 63, no. 9, pp. 769–75, 2009.
[5] A. J. Lopez-Martin, A. Carlosena, “Current-modemultiplier/divider circuits basedon the MOS translinear principle,” Analog Integr CircuitsSignal Process, 2001.
[6] A. J. Lopez-Martin, C.A. De La Cruz Bias, J. Ramirez-Angulo, R.G. Carvajal, “Compact low-voltage CMOS current-mode multiplier/divider, ” In Proc. IEEE international symposium on circuits and systems (ISCAS), 2010. pp. 1583–6.
[7] J.Antonio Lopez-Marti, C. A. De La Cruz Blas, J. Ramirez-Angulo, R.G.Carvajal, “Current-Mode CMOS Multiplier/Divider Circuit Operating in Linear/Saturation Regions,” Analog Integr Circ Sig Process,” vol. 66 , no 10, pp. 299-302, 2010.
[8] F. Pr´egaldiny, J. Baptiste Kammerer , C. Lallement,” Compact Modeling and Applications of CNTFETs for Analog and Digital Circuit Design”, in proc. 13th IEEE International Conference on Electronics, Circuits and Systems, 2006, pp. 4244-0395.
[9] L. mao peng , Z. zhang ,s. wang, “Carbon Nanotube Electronics Recent Advances,” in J Materialstoday, vol.17, no. 9, pp.433-442, November 2014 .
[10] I. Makwana, V. Sheth, “A Low Power High Bandwidth Four Quadrant Analog Multiplier in 32 Nnmcnfet Technology,” International Journal of VLSI design &Communication Systems (VLSICS), vol. 3, no. 2, pp. 73-83, April 2012.
[11] Y.Bin. Kim, “Integrated Circuit Design Based on Carbon Nanotube Field Effect Transistor,” Iransactions on Electrical and Electronic Materials, vol. 12, no. 5, pp. 175-188 , October 2011.
[12] Rodney S.Ruoff, DongQian, WingKam Liu, C.R.Physique, 4, 2003, 993
[13] H. Raffi-Tabar, Physics Reports, 390, 2004, 235.
[14] R.Satio, M. S. Dresselhaus, G. Dresselhaus, “Physical Properties Of Carbon Nanotubes,” Imperial College Press ISBN 1-86094-093-5, 1998.
[15] J. Peder Dahl, “Introduction to the Quantum World of Atoms and Molecules, ” World Scientific Publishing Company, 9810245653, 2001.
[16] M.H. Hashiesh, S.A. Mahmoud, A.M.Soliman, “New four-quadrant CMOS currentmode and voltage-mode multipliers, Analog Integr Circuits Signal Process, vol. 45, no 3, pp. 295–307, 2005.
[17] S. Minaei, E.Yuce, “New squarer circuits and a current-mode full-wave rectifier topology suitable for integration,” in J Radio Eng, vol. 19,no. 4 pp. 657–61, 2010.
[18] R.Hidayat, K.Dejhan, P.Moungnoul, Y.Miyanaga, “A GHz simple CMOS squarercircuit, ” in proc. IEEE International Symposium on Communications and Information Technologies (ISCIT), 2008, pp. 539–42.
[19] K.M. Al-Tamimi, M. A.Al-Absi, “An ultra-low power high accuracy current-mode CMOS squaring circuit,” In proc. International Conference ofElectrical and Electronics Engineering, 2012. pp. 872–4.
[20] S. Wisetphanichkij, N.Singkrajom, M.Kumngern, K.Dejhan, “A low-voltage CMOS current squarer circuit. ” in proc. IEEE International Symposium on Communications and Information Technology (ISCIT), 2005, pp. 271–4.
[21] M.H. Danesh, E. Mahmoudian, A.Emami Fard ” A new current-mode squarer circuit for RMS-to-DC converter,” Int J Eng Innovative Technol (IJEIT) , vol.3, no. 2, 2013
[22] M. Kumngern, K. Dejhan, “Versatile dual-mode class-AB four-quadrant analog multiplier,” Int J Signal Process, vol. 2, no. 4, 2005.
[23] C.A.De La Cruz-Blas, A.J.Lopez-Martin, A.Carlosena, “1.5 V four-quadrant CMOS current multiplier/divider,” Electron Lett, vol. 39, no. 5, pp. 434–6, 2003.
[24] C. Popa, “Improved accuracy current-mode multiplier circuits with applications in analog signal processing,” IEEE Trans Very Large Scale Integr (VLSI) Syst, vol.22, no. 2, pp. 443–7, 2014.
[25] A.Ravindran, K.Ramarao, E.Vidal, M.Ismail, “Compact low voltage four quadrant CMOS current multiplier,” Electron Lett, vol. 37, no. 24, pp. 1428–9, 2001.
[26] P.Prommee, M. Somdunyakanok, M. Kumngern, K. Dejhan, “Single low-supply current-mode CMOS analog multiplier circuit,” in proc.IEEE International Sym-posium on Communications and Information Technologies, ISCIT. 2006. pp. 1101–4.
[27] V. Oliveira, N.Oki, “Low voltage four-quadrant current multiplier: an improved topology for n-well CMOS process, ” In proc International Conference on Design & Technology of Integrated Systems in Nanoscale Era, 2007. pp. 52–5.
[28] N. Beyraghi, A. Khoei, “CMOS design of a low power and high precision four-quadrant analog multiplier,” AEU - International Journal of Electronics and Communications, vol. 63, no. 1, pp.400-7, 2015.
