Numerical Study of Microbeam with Geometric Discontinuity Under Electrostatic Load using Strain Gradient Theory
محورهای موضوعی : Mechanical Engineering
Hadi Hamidizadeh
1
(Department of Mechanical Engineering, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran.)
Mahmoud Mousavi Mashhadi
2
(Department of Mechanical Engineering, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran.)
Younes Mohammadi
3
(Department of Mechanical Engineering, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran.)
کلید واژه: Electrostatic, Strain gradient, Differential quadrature method, Conductive polymer,
چکیده مقاله :
In this work, the pull in analysis of microbeam with geometric discontinuity for two different boundary conditions has been investigated. Boundary conditions are considered as Clamped-Free (CF) and Clamped-Clamped (CC). The governing equations are transformed into non-dimensional form and then solved using Differential Quadrature method (DQ). The conductive polymer length scale parameter was also obtained. The effects of different parameters and pull in voltage on microbeam are studied. Most of the microbeams analyzes were made of Gold, Nickel or Silicon, but we used variety of conductive polymers in this paper. The results show that conductive polymer microbeams can be a suitable substitute for expensive metals. The results can be used to design and improve the performance of Micro-Electromechanical System (MEMS) devices.
[1] Rahnama, Mashhadi, A. N., and Moghimi Zand., M. M., Nonlinear Dynamics of Flexible Nanopositioning Systems with Geometrical Imperfection, Microsystem Technologies, Vol. 25, 2019, pp.1-11.
[2] Noghrehabadi, A., Haghparast, A., Dynamic and Static Pull-In Instability of Partially Affected Nano-Cantilevers Using Modified Couple Stress Theory, Modares Mechanical Engineering, Vol. 16, 2016, pp. 81-91 (In Persian).
[3] Sadeghi, M., Fathalilou, M., and Rezazadeh, G., Study on the Size Dependent Behavior of a Micro-Beam Subjected to a Nonlinear Electrostatic Pressure, Modares Mechanical Engineering, Vol.14, 2015, pp. 137-144 (In Persian).
[4] Zhu, J., Yao, K., Dong, X., Huang, Q., and Liu, R., Pull–in Behavior of Electrostatically Actuated Stepped Microbeams, International Journal of Modern Physics B, Vol. 32, 2018, pp. 80-91.
[5] Habibnejad Korayem, M., Habibnejad Korayem, A., Modeling of AFM with a Piezoelectric Layer Based on the Modified Couple Stress Theory with Geometric Discontinuities, Applied Mathematical Modelling, Vol. 45, 2017, pp. 439-456.
[6] Rahaeifard, M., Ahmadian, M. T., On Pull-in Instabilities of Microcantilevers, International Journal of Engineering Science, Vol.87, 2015, pp. 23-31.
[7] Rahaeifard, M., Kahrobaiyan, M. H., and Asghari, M., Static Pull-In Analysis of Microcantilevers Based on The Modified Couple Stress Theory, Sensors and Actuators A, Vol. 171, 2011, pp. 370-374.
[8] Zhu, J., Liu, R., Sensitivity Analysis of Pull–in Voltage for Rf Mems Switch Based Modified Couple Stress Theory, Applied Mathematics and Mechanics, Vol. 74, 2015, pp.1-14.
[9] Sedighi, H., Koochi, A., and Abadyan, M, Modeling the Size Dependent Static and Dynamic Pull – In Instability of Cantilever Nanoactuator Based on Strain Gradient Theory, International Journal of Applied Mechanics, Vol. 6, 2014, pp. 1-21.
[10] Wang, X., Duan, G., Discrete Singular Convolution Element Method for Static, Buckling and Free Vibration Analysis of Beam Structures, Applied Mathematics and Computation, Vol. 234, 2014, pp. 36- 51.
[11] Fathalilou, M., Rezaee, M., A Comparison Between Approaches for Solving Governing Nonlinear Equation of Vibration of Electrostatic Micro-Sensor,Modares Mechanical Engineering, No. 16, 2016, pp. 101-107 (In Persian).
[12] Kumar, D., Sharma, R. C., Advances in Conductive Polymers, Eur Polymer Journal, Vol. 34, 1998, pp. 1053- 1060.
[13] Valentova, H., Stejskal, J., Mechanical Properties of Polyaniline, Synthetic Metals, Vol. 160, 2010, pp. 832- 834.
[14] Lang, U., Naujoks, N., and Dual, J., Mechanical Characterization of Pedot: Pss Thin Films, Synthetic Metals, Vol. 159, 2009, pp. 473- 479.
[15] Cho, M., Cho, Y., Choi, H., and Jhon, M., Synthesis and Electrorheological Characteristics of Polyaniline- Coated Poly (Methyl Methacrylate) Microsphere: size effect, Langmuir, Vol. 19, 2003, pp. 5875- 5881.
[16] Zhang, G., Chu, V., Electrostatically Actuated Conducting Polymer Microbridges, Journal of applied physics, Vol. 101, 2007, pp. 1-8.
[17] Kumar, R., Singh, S., and Yadav, B., Conducting polymer: Synthesis, Properties and Applications, International Advanced Research Journal in Science, Engineering and Technology, Vol. 2, 2015, pp. 110- 124.
[18] Lam, D. C. C., Yang, F., Chong A. C. M., Wang, J., and Tong, P., Experiments and Theory in Strain Gradient Elasticity, Journal of the Mechanics and Physics of Solids, Vol. 51, 2003, pp. 1477-1508.
[19] Bostani, M., Mohammadi, A. K., Thermoelastic Damping in Microbeam Resonators Based on Modified Strain Gradient Elasticity and Generalized Thermoelasticity Theories, Acta Mech, Vol. 229, 2018, pp. 173-192.
[20] Koochi, A., Sedighi, H., and Abadyan, M., Modeling the Size Dependent Pull- in Instability of Beam – Type Nems Using Strain Gradient Theory, Latin American Journal of Solids and Structures, Vol. 11, 2014, pp. 1806 -1829.
[21] Fathalilou, M., Sadeghi, M., Rezazadeh, G., Nonliner Behavior of Capacitive Micro – Beams Based on Strain Gradient Theory, Journal of Mechanical Science and Technology, Vol. 28, 2013, pp. 1141- 1151.
[22] Shu, C., Differential Quadrature and Its Application in Engineering, London: Springer, 2000.
[23] Shu, C., Du, H., A Generalized Approach for Implementing General Boundary Conditions in the Gdq Free Vibration Analysis of Plates, International Journal of Solids and Structures, Vol. 34, 1997, pp. 837-846.
[24] Zhang, G., Chu, V., Electrostatically Actuated Conducting Polymer Microbridges, Journal of Applied Physics, Vol. 101, 2007, pp. 1-8.
