Experimental Study on the Effects of Friction Stir Spot Welding Process Parameters on AL2024T3 Joint Strength

محورهای موضوعی : advanced manufacturing technology

Majid Farhang ¹ (School of Mechanical Engineering, College of Engineering, University of Tehran, Iran.)
Mohammadreza Farahani ² (School of Mechanical Engineering, College of Engineering, University of Tehran, Iran.)
Moein Enami ³ (School of Mechanical Engineering, College of Engineering, University of Tehran, Iran.)

تاریخ دریافت : 1400/02/06 تاریخ پذیرش : 1400/06/04 تاریخ انتشار : 1400/09/10

کلید واژه: Aluminium 2024T3, Dwell time, Failure load, Normal plunge depth, Friction stir spot welding, Rotational Speed,

چکیده مقاله :

In this study, effects of process parameters of Friction Stir Spot Welding were investigated on Al2024T3 which has poor weldability. Several spot welds were performed by the FSSW process on the 2mm aluminium sheets. The effects of main process parameters such as tool Rotational Speed (RS), Normal Plunge Depth (NPD), and Dwell Time (DT) on the joint strength were investigated. By increasing the tool rotational speed, the joint strength increased, consequently. The mean failure load improved 52% when the tool rotational speed increased from 800 rpm to 1120 rpm, whereas increasing the rotational speed from 1120 to 1600 did not have significant effect on the failure load. The results showed, increasing the normal plunge depth from 1.5 to 1.75 millimetre led to an increase in the failure load of spot welds by about 1.62 times. Also, the 3 seconds dwell time showed higher failure load compared to 2 and 5 seconds dwell time.

منابع و مأخذ:

• Daliri, O., Farahani, M., and Farhang, M., A Combined Numerical and Statistical Analysis for Prediction of Critical Buckling Load Of the Cylindrical Shell with Rectangular Cutout, Engineering Solid Mechanics, Vol. 7, 2019, pp. 35-46.


• Sam Daliri, O., Farahani, M., Characterization of Stress Concentration in Thin Cylindrical Shells with Rectangular Cutout Under Axial Pressure, International Journal of Advanced Design and Manufacturing Technology, Vol. 10, 2017, pp. 133-141.


• Stetco, C., Sam-Daliri, O., Faller, L. M., and Zangl, H., Piezocapacitive Sensing for Structural Health Monitoring in Adhesive Joints, in 2019 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 2019, pp. 1-5.


• Nguyen, N., Kim, D., and Kim, H., Assessment of the Failure Load for an AA6061-T6 Friction Stir Spot Welding Joint, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 225, 2011, pp. 1746-1756.


• Farhang, M., Sam-Daliri, O., Farahani, M., and Vatani, A., Effect of Friction Stir Welding Parameters On the Residual Stress Distribution of Al-2024-T6 Alloy, Journal of Mechanical Engineering and Sciences, Vol. 15, 2021, pp. 7684-7694.


• Majid, F., Mohammadreza, F., and Mohammad, N., Incorporation of Al2O3 Powder for Improvement of the Mechanical and Metallurgical Properties of Multi-Passes Friction Stir Welding of Al 2024, Iranian Journal of Manufacturing Engineering, Vol. 8, 2021, pp. 35-46.


• Shahmirzaloo, A., Farahani, M., and Farhang, M., Evaluation of Local Constitutive Properties of Al2024 Friction Stir-Welded Joints Using Digital Image Correlation Method, The Journal of Strain Analysis for Engineering Design, 2020, pp. 0309324720981201.


• Sattari-Far, I. A., Farahani, M., Effect of the Weld Groove Shape and Pass Number On Residual Stresses in Butt-Welded Pipes, International Journal of Pressure Vessels and Piping, Vol. 86, 2009, pp. 723-731.


• Ebrahimi, S., Farahani, M., and Akbari, D., The Influences of the Cyclic Force Magnitude and Frequency On the Effectiveness of the Vibratory Stress Relief Process On a Butt Welded Connection, The International Journal of Advanced Manufacturing Technology, Vol. 102, 2019, pp. 2147-2158.


• Zamanpour, A., Farahani, M., Farhang, M., and Vafa, N., Experimental Study on the Effects of Harmonic Vibration on the Stress Relief of the Butt Welded AISI 1021 Pipes, 2020.


• Pan, T. Y., Friction Stir Spot Welding (FSSW)-a Literature Review, 2007.


• Rouzbehani, R., Kokabi, A., Sabet, H., Paidar, M., and Ojo, O., Metallurgical and Mechanical Properties of Underwater Friction Stir Welds of Al7075 Aluminum Alloy, Journal of Materials Processing Technology, Vol. 262, 2018, pp. 239-256.


• Saeidi, M., Manafi, B., Besharati Givi, M., and Faraji, G., Mathematical Modeling and Optimization of Friction Stir Welding Process Parameters in Aa5083 and Aa7075 Aluminum Alloy Joints, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 230, 2016, pp. 1284-1294.


• Tabasi, M., Farahani, M., Givi, M. B., Farzami, M., and Moharami, A., Dissimilar Friction Stir Welding of 7075 Aluminum Alloy to AZ31 Magnesium Alloy Using SiC Nanoparticles, The International Journal of Advanced Manufacturing Technology, Vol. 86, 2016, pp. 705-715.


• Hirasawa, S., Badarinarayan, H., Okamoto, K., Tomimura, T., and Kawanami, T., Analysis of Effect of Tool Geometry On Plastic Flow During Friction Stir Spot Welding Using Particle Method, Journal of Materials Processing Technology, Vol. 210, 2010, pp. 1455-1463.


• Badarinarayan, H., Yang, Q., and Zhu, S., Effect of Tool Geometry On Static Strength of Friction Stir Spot-Welded Aluminum Alloy, International Journal of Machine Tools and Manufacture, Vol. 49, 2009, pp. 142-148.


• Enami, M., Farahani, M., and Farhang, M., Novel Study On Keyhole Less Friction Stir Spot Welding of Al 2024 Reinforced with Alumina Nanopowder, The International Journal of Advanced Manufacturing Technology, Vol. 101, 2019, pp. 3093-3106.


• Karthikeyan, R., Balasubramanian, V., Predictions of the Optimized Friction Stir Spot Welding Process Parameters for Joining AA2024 Aluminum Alloy Using RSM, The International Journal of Advanced Manufacturing Technology, Vol. 51, 2010, pp. 173-183.


• Arul, S., Miller, S., Kruger, G., Pan, T. Y., Mallick, P., and Shih, A., Experimental Study of Joint Performance in Spot Friction Welding of 6111-T4 Aluminium Alloy, Science and Technology of Welding and Joining, vol. 13, 2008, pp. 629-637.


• Cox, C. D., Gibson, B. T., Strauss, A. M., and Cook, G. E., Effect of Pin Length and Rotation Rate On the Tensile Strength of a Friction Stir Spot-Welded Al Alloy: A Contribution to Automated Production, Materials and Manufacturing Processes, Vol. 27, 2012, pp. 472-478.


• Shen, Z., Yang, X., Zhang, Z., Cui, L., and Li, T., Microstructure and Failure Mechanisms of Refill Friction Stir Spot Welded 7075-T6 Aluminum Alloy Joints, Materials & design, Vol. 44, 2013, pp. 476-486.


• Mubiayi, M. P., Akinlabi, E. T., An Overview on Friction Stir Spot Welding of Dissimilar Materials, in Transactions on Engineering Technologies, ed: Springer, 2015, pp. 537-549.


• Mahoney, M. W., Mishra, R. S., Friction Stir Welding and Processing: ASM International, 2007.


• Dolatkhah, A., Golbabaei, P., Givi, M. B., and Molaiekiya, F., Investigating Effects of Process Parameters On Microstructural and Mechanical Properties of Al5052/SiC Metal Matrix Composite Fabricated via Friction Stir Processing, Materials & Design, Vol. 37, 2012, pp. 458-464.


• Jamalian, H. M., Farahani, M., Givi, M. B., and Vafaei, M. A., Study on the Effects of Friction Stir Welding Process Parameters On the Microstructure and Mechanical Properties of 5086-H34 Aluminum Welded Joints, The International Journal of Advanced Manufacturing Technology, Vol. 83, 2016, pp. 611-621.


• Nazari, M., Besharati Givi, M. K., Farahani, M. R., Mollaei Milani, J., and Mohammad Zadeh, H., Investigation on the Effects of Using Nano-Size Al2O3 Powder On the Mechanical and Microstructural in The Multi-Passes Continuous Friction Stir Welding of the 2024-T6, Modares Mechanical Engineering, Vol. 14, 2015, pp. 85-90.


• Bilici, M. K., Yükler, A. I., Influence of Tool Geometry and Process Parameters On Macrostructure and Static Strength in Friction Stir Spot Welded Polyethylene Sheets, Materials & Design, Vol. 33, 2012, pp. 145-152.


• Tozaki, Y., Uematsu, Y., and Tokaji, K., Effect of Processing Parameters On Static Strength of Dissimilar Friction Stir Spot Welds Between Different Aluminium Alloys, Fatigue & Fracture of Engineering Materials & Structures, Vol. 30, 2007, pp. 143-148.


• Venukumar, S., Yalagi, S., and Muthukumaran, S., Comparison of Microstructure and Mechanical Properties of Conventional and Refilled Friction Stir Spot Welds in AA 6061-T6 Using Filler Plate, Transactions of Nonferrous Metals Society of China, Vol. 23, 2013, pp. 2833-2842.


• Bakavos, D., Prangnell, P., Effect of Reduced or Zero Pin Length and Anvil Insulation On Friction Stir Spot Welding Thin Gauge 6111 Automotive Sheet, Science and Technology of Welding and Joining, Vol. 14, 2009, pp. 443-456.


• Andalib, H., Farahani, M., and Enami, M., Study on the New Friction Stir Spot Weld Joint Reinforcement Technique on 5754 Aluminum Alloy, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 232, 2018, pp. 2976-2986.


• Farzami, M., Farahani, M., Akbari, D., and Tabasi, M., "Friction stir weld of AZ91 magnesium alloy with and without nano-SiC particle," JOM, vol. 71, 2019, pp. 4171-4179.


• Shahani, A. R., Farrahi, A., Effect of Sheet Thickness on Fatigue Behavior of Friction Stir Spot Weld of Al 6061-T6 Lap-Shear Configuration, Journal of Stress Analysis, Vol. 3, 2018, pp. 61-68.


• Hajideh, M. R., Farahani, M., Alavi, S. A. D., and Ramezani, N. M., Investigation on The Effects of Tool Geometry On the Microstructure and The Mechanical Properties of Dissimilar Friction Stir Welded Polyethylene and Polypropylene Sheets, Journal of Manufacturing Processes, Vol. 26, 2017, pp. 269-279.


• Badarinarayan, H., Shi, Y., Li, X., and Okamoto, K., Effect of Tool Geometry On Hook Formation and Static Strength of Friction Stir Spot Welded Aluminum 5754-O Sheets, International Journal of Machine Tools and Manufacture, Vol. 49, 2009, pp. 814-823.


• Sun, Y., Fujii, H., Takaki, N., and Okitsu, Y., Microstructure and Mechanical Properties of Mild Steel Joints Prepared by A Flat Friction Stir Spot Welding Technique, Materials & Design, Vol. 37, 2012, pp. 384-392.


• Rao, H., Jordon, J., Barkey, M., Guo, Y., Su, X., and Badarinarayan, H., Influence of Structural Integrity On Fatigue Behavior of Friction Stir Spot Welded AZ31 Mg Alloy, Materials Science and Engineering: A, Vol. 564, 2013, pp. 369-380.