Buckling of Piezoelectric Composite Cylindrical Shell Under Electro-thermo-mechanical Loading
محورهای موضوعی : Engineering
A Ghorbanpour Arani
1
(Faculty of Mechanical Engineering, University of Kashan---
Institute of Nanoscience & Nanotechnology, University of Kashan, Kashan)
S Shams
2
(Department of Mechanical Engineering, Faculty of Engineering, Mobarakeh Branch, Islamic Azad University)
S Amir
3
(Faculty of Mechanical Engineering, University of Kashan)
M.J Maboudi
4
(Faculty of Mechanical Engineering, University of Kashan)
کلید واژه: Cylindrical shell, Energy method, Piezoelectric polymeric, Electro-thermo-mechanical loadings, DWBNNT, Axial buckling,
چکیده مقاله :
Using principle of minimum total potential energy approach in conjunction with Rayleigh-Ritz method, the electro-thermo-mechanical axial buckling behavior of piezoelectric polymeric cylindrical shell reinforced with double-walled boron-nitride nanotube (DWBNNT) is investigated. Coupling between electrical and mechanical fields are considered according to a representative volume element (RVE)-based micromechanical model. This study indicates how buckling resistance of composite cylindrical shell may vary by applying thermal and electrical loads. Applying the reverse voltage or decreasing the temperature, also, increases the critical axial buckling load. This work showed that the piezoelectric BNNT generally enhances the buckling resistance of the composite cylindrical shell.
[1] Rubio A., Corkill J.L., Cohen M.L., 1994, Theory of graphitic boron nitride nanotubes, Physical Review B 49: 5081-5084.
[2] Blasé X., Rubio A., Louie S.G., Cohen M.L., 1994, Stability and Band Gap Constancy of Boron Nitride Nanotubes, Europhysics Letters 28:335-340.
[3] Chopra N.G., Luyken R.J., Cherrey K., Crespi V.H., Cohen M.L., Louie S.G., Zettl A., 1995, Boron nitride nanotubes, Science 269: 966-967.
[4] Chen Y., Zou J., Campbell S.J., Caer G.L., 2004, Boron nitride nanotubes: Pronounced resistance to oxidation, Applied Physics Letters 84: 2430-2432.
[5] Sai N., Mele E.J., 2003, Microscopic theory for nanotube piezoelectricity, Physical Review B 68: 241405-241408.
[6] Haque A., Ramasetty A., 2005, Theoretical study of stress transfer in carbon nanotube reinforced polymer matrix composites, Composite Structures 71: 68-77.
[7] Ghorbanpour Arani A., Maghamikia Sh., Mohammadimehr M., Arefmanesh A., 2011, Buckling analysis of laminated composite rectangular plates reinforced by SWCNTs using analytical and finite element methods, Journal of Mechanical Science and Technology 25: 809-820.
[8] Odegard G.M., Gates T.S., Wise K.E., Park C., Siochi E.J., 2003, Constitutive modeling of nanotube-reinforced polymer composites, Composites Science and Technology 63: 1671-1687.
[9] Vodenitcharova T., Zhang L.C., 2006, Bending and local buckling of a nanocomposite beam reinforced by a single-walled carbon nanotube, International Journal of Solids and Structures 43: 3006-3024.
[10] Gao X.L., Li K., 2005, A shear-lag model for carbon nanotube-reinforced polymer composites, International Journal of Solids and Structures 42: 1649-1667.
[11] Shen H.S., Zhang C.L., 2010, Thermal buckling and post buckling behavior of functionally graded carbon nanotube-reinforced composite plates, Materials and Design 31: 3403-3411.
[12] Salehi-Khojin A., Jalili N., 2008, Buckling of boron nitride nanotube reinforced piezoelectric polymeric composites subject to combined electro-thermo-mechanical loadings, Composites Science and Technology 68: 1489-1501.
[13] Salehi-Khojin A., Jalili N., 2008, A comprehensive model for load transfer in nanotube reinforced piezoelectric polymeric composites subjected to electro-thermo-mechanical loadings, Composites Part B Engineering 39: 986-998.
[14] Tan P., Tong L., 2001, Micro-electromechanics models for piezoelectric-fiber-reinforced composite materials, Composites Science and Technology 61: 759-69.
[15] Brockmann T.H., 2009, Theory of Adaptive Fiber Composites From Piezoelectric Material Behavior to Dynamics of Rotating Structures (Solid Mechanics and Its Applications), Springer, USA.
[16] Jone R.M., 1975, Mechanics of Composite Materials, Scripta Book Company, Washington.
[17] Whitney J.M., 1987, Structural Analysis of Laminated Anisotropic Plates, Technomic Publishing Company, Lancaster.
[18] Sanders J.L., 1959, An Improved First-Approximation Theory for Thin Shells, Technical Report NASA TR R-24, National Aeronautics and Space Administration, Langley Research Center.
[19] Koiter W.T., 1960, A Consistent First Approximation in the Ggeneral Theory of Thin Elastic Shells. In Proceedings of the Symposium on the Theory of Thin Elastic Shells, Internation Union of Theoretical and Applied Mechanics North-Holland, Amsterdam.
[20] Vinson J.R., 2005, Plate and Panel Structures of Isotropic: Composite and Piezoelectric Materials, Including Sandwich Construction, Springer, USA.
[21] Donnell L.H., 1933, Stability of thin-walled tubes under torsion, Technical Report NACA Report No. 479, National Advisory Committee for Aeronautics.
[22] Ye L., Lun G., Ong L.S., 2011, Buckling of a thin-walled cylindrical shell with foam core under axial compression, Thin Walled Structure 49: 106–111.
