Analytical Modeling of Specific Energy Consumption and Cost Share in Comprehensive Textile Industry: Case Study of Ethiopia
محورهای موضوعی : Business Management
Dessie Bantelay
1
,
Muluken Getie
2
,
Betelhem Bruk
3
,
Robile Workalemayehu
4
1 - Faculty of mechanical and industrial engineering, Bahirdar institute of technology, Bahirdar university
2 - Faculty of mechanical and industrial engineering, Bahir Dar Institute of Technology, Bahir Dar University
3 - Faculty of Electrical & Computer Engineering, Bahir Dar Institute of Technology, Bahir Dar University
4 - Faculty of Mechanical & Industrial Engineering, Bahir Dar Institute of Technology, Bahir Dar University
کلید واژه: energy consumption, Energy efficiency, Analytical cost modeling, Energy cost-share, Textile industry,
چکیده مقاله :
Energy is one of the primary inputs in textile processing industries that have a significant impact on the cost of a cotton product. The energy cost-share is reported between 5-10% of the total production cost of woven cotton fabric in textile factories of developed countries. However, it is far higher in developing countries. This study aims to contribute to the understanding of energy use and energy efficiency in Ethiopian cotton textile industries through multi-level comparisons and analyses. Determination of specific energy consumption, specific cost-share and specific energy consumption and cost estimation model is developed in cotton textile processing industries of Ethiopia to show the level of energy utilization practice effectiveness and to point out specific energy conservation measure. Actual and designed energy consumption data has been gathered from machine nameplate and factory design documents. Then important performance indicating data is collected through on-site measurement. This research pointed out that, the actual energy consumption per unit textile product is higher than the estimated consumption of each involved textile processing stage. The cost-share of energy in Ethiopian cotton textile industries accounts for an average of 16.01% of the total production cost of a cotton product and it is the second-highest cost of a product next to cotton. This indicates the existing of poor energy management practices in the textile industries. As a result, they face high production costs, poor product quality, and non-conducive working environment. This study shows that any productivity improvement measure in the textile industries of Ethiopia has to give more emphasis on the reduction of energy cost than any other production inputs.
Dedimas T., A., Gebeyehu S.G. (2019). Application of failure mode effect analysis (FMEA) for efficient and cost effective manufacturing: A case study at Bahir Dar Textile Share Company, Ethiopia. Journal of Optimization in Industrial Engineering, 12 (1), 15-29.
Khalil E. (2010). Heat recovery in the textile dyeing and finishing industry: lessons from developing economies. Journal of Energy in Southern Africa, 21 (3)
Khude P. (2017). A Review on Energy Management in Textile Industry. Innovative Energy & Research, 6:2, 2576-1463.
Yilma Goshua, Y., Kitawb, D. & Matebuc, A. (2017). Development of Productivity Measurement and Analysis Framework for Manufacturing Companies. Journal of Optimization in Industrial Engineering, 10 (22), 1-13.
United Nations, Department of Economic and Social Affairs (UN/DESA). (2012). World Population Prospects: the 2012 Revision. Available at: http://esa.un.org/unpd/ wpp/unpp/panel population.htm.
Lin, B.Q., Tian, P. (2016). The energy rebound effect in China's light industries: a translog cost function approach. Journal of clean production, 112, 2793-2801
Lin, B.Q., Ouyang, X.L. (2014). Electricity demand and conservation potential in the Chinese nonmetallic mineral products industry. Energy Policy, 68, 243-253.
Lin, B.Q., Du, K.R. (2013). Technology gap and China's regional energy efficiency: a parametric Meta frontier approach. Energy Economics. 40, 529-536.
Yacout D.M.M., Abd El-Kawi M.A. and Hassouna M.S. (2014). Applying Energy Management in Textile Industry, Case Study: An Egyptian Textile Plant. International Energy Journal, 14, 87-94.
Worrell, E. and Galitsky, C. (2008). Energy-efficiency improvement opportunities for cement making. An energy star guide for energy and plant managers. Report No. 54036, Berkeley, CA: Lawrence Berkeley National Laboratory. https://escholarship.org/uc/item/8wm6q3v3
Hasanbeigi, A. and Lynn P. (2015). A technical review of emerging technologies for energy and water efficiency and pollution reduction in the textile industry. Journal of Cleaner Production, 95, 30-44.
Lin, B., Zhao, H. (2016). Technological progress and energy rebound effect in China's textile industry: Evidence and policy implications. Renewable and sustainable energy reviews, 60, 173-181.
Dametew, A., Ketaw, D. & Ebinger, F. (2019) Production Planning and Control Strategies Used as A gear train for The Death and Birth of Manufacturing Industries. Journal of Optimization in Industrial Engineering. 12 (2), 21-32.
Shen, B., Price, L., & Lu, H. (2012). Energy audit practices in China: National and local experiences and issues. Energy Policy, 46. 346-358.
Fleiter, T., Gruber, E., Eichhammer, W. & Worrell, E. (2012b). The German energy audit program for firms -a cost effective way to improve energy efficiency. Energy Efficiency, 5(4), 447- 469.
Giacone, E. & Mancò, S. (2012). Energy efficiency measurement in industrial processes. Energy. 38, 331-345.
Tanaka, K. (2011). Review of policies and measures for energy efficiency in industry sector. Energy Policy, 39(10), 6532-6550.
Saygin, D., Worrell, E., Patel, M. K. & Gielen, D. J. (2011). Benchmarking the energy use of energy-intensive industries in industrialized and in developing countries. Energy, 36(11), 6661-6673.
Abdelaziz, E. A., Saidur, R. & Mekhilef, S. (2011). A review on energy saving strategies in industrial sector. Renewable and Sustainable Energy Reviews, 15 (1), 150-168.
Gordić, D., Babić, M., Jovičić, N., Šušteršič, V., Končalović, D. & Jelić, D. (2010). Development of energy management system - Case study of Serbian car manufacturer. Energy Conversion and Management, 51 (12), 2783-2790.
Alcorta, L., Bazilian, M., De Simone & G., Pedersen, A. (2014). Return on investment from industrial energy efficiency: evidence from developing countries. Energy Efficiency, 7 (1), 43-53.
Kemal Ozturk, H. (2005). Energy usage and cost in textile industry: A case study for Turkey. Energy, 30(13), 2424 - 2446
Schulze, M., Nehler, H, Ottosson, M. & Thollander, P. (2016). Energy management in industry - a systematic review of previous findings and an integrative conceptual framework. Journal of cleaner production, 112(5), 3692-3708.
Peterson, R. D. & Belt, C. K. (2009). Elements of an Energy Management Program. The Journal of the Minerals, Metals & Materials Society (JOM), 61 (4), 19-24.
Sathaye, J., Price, L., de la Rue du Can, S. & Fridley, D. (2005). Assessment of energy use and energy savings potential in selected industrial sectors in India. Berkeley CA: Lawrence Berkeley National Laboratory Report LBNL-57293. Available at: http://industrial-energy.lbl.gov/node/130.
Chung W. (2011). Review of building energy-use performance benchmarking methodologies. Applied Energy, 88, 1470–9.
Wang, E., Shen, Z. & Grosskopf, K. (2014). Benchmarking energy performance of building envelopes through a selective residual clustering approach using high dimensional dataset. Energy and Buildings, 75. 10–22.
Kaplan, E. (2004). The Cost Factor in Textile Industry and General Utilization of Energy Cost, MSc. Thesis, Cukurova University, Institute of Natural and Applied Science, Textile Engineering Department, Adana, Turkiye.
Putra, G.P & Purba H.H. (2018). Failure mode and effect analysis on power plant boiler. Journal of Optimization in Industrial Engineering. 11(2), 2018, 1-5.
Ethiopian Textile Industry Development Institute (ETIDI), (2014). “TEXTILE INDUSTRY DEVELOPMENT IN ETHIOPIA”. Ethiopian Textile Industry Development Institute (ETIDI), October, 2014, Addis Ababa; Ethiopia.
Worrell, E. & Price, L. (2006). An integrated benchmarking and energy savings tool for the iron and steel industry. International Journal of Green Energy, 3(2), 117-126.
Koç E. & Çinçik E. (2010). Analysis of Energy Consumption in Woven Fabric Production. FIBRES & TEXTILES in Eastern Europe, 18(2), 14-20.
Kaplan E. & Koç E. (2010). Investigation of Energy Consumption in Yarn Production with Special Reference to Open-End Rotor Spinning. FIBRES & TEXTILES in Eastern Europe, 18(2). 7-13
