Experimental Study of the Effect of Rotational Speed, Feed Rate, Lubricant and Tool Material in Friction Drilling of the Titanium Sheets

محورهای موضوعی : Metal Forming

Mehran Yazdani Nogarani ¹ , Reza Nosouhi ²

1 - Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
2 - Modern Manufacturing Technologies Research Center, Najafabad Branch, Islamic Azad University, Najafabad, Iran|Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran

تاریخ دریافت : 1397/10/04 تاریخ پذیرش : 1398/11/15 تاریخ انتشار : 1398/11/27

کلید واژه: Thermal conductivity, Speed, Friction welding, titanium sheets, lubricant, tool material, Feedrate,

چکیده مقاله :

In this research, the effects of the rotational speed, feed rate, tool material and lubricants on the tool life and the hole quality are studied in the frictional drilling of the titanium sheets. The friction drilling tests are performed on a CNC milling machine. Furthermore, 5 specimens are selected and their metallurgical structures are studied. The results show thatamong the input parameters, the rotational speed and feed rate significantly alter the output parameters.Furthermore,the results showed that the best hole quality can be achieved using a WC tool material along with appropriate lubricant. The tool geometry is also an important factor that can excel the produced hole quality and increase the tool life. The metallurgical results also showed that because of the severe plastic deformation of the layers close to the hole surface, the hardness of these layers is higher than that of the other regions in the workpiece.

منابع و مأخذ:

[1] Miller, S. F and Shih, A. J. 2006. Friction Drilling – A Chipless Hole-Making Process. ASME International Conference on Manufacturing Science & Engineering, Ypsilanti, MI, October 8-11.

[2] Miller, S. F. and Blau, P. J. 2005. Microstructural Alterations Associated With Friction Drilling of Steel, Aluminum, and Titanium. Journal of Material Engineering Performance.14(5): 647-653.

[3] Chow, H. M., Lee, S. M. andYang, L. D. 2008. Machining Characteristic Study of Friction Drilling on AISI 304 Stainless Steel. Journal of Materials Processing Technology. 207(1–3): 180-186.

[4] Urbikain, G., Perez, J. M., de Lacalle, L. N. L. and Andueza, A. 2018. Combination of Friction Drilling and Form Tapping Processes on Dissimilar Materials for Making Nutless Joints. Proceedings of the Institution of Mechanical Engineers. Part B: Journal of Engineering Manufacture. 232(6): 231-240.

[5] Demir, Z. and Özek, C. 2014. Investigate the Effect of Pre-drilling in Friction Drilling of A7075-T651. Journal of Materials Processing Technology. 29(5): 593-599.

[6] Mutalib, M. Z. A., Ismail, M. I. S., Jalil, N. A. A. and As’arry, A. 2018. Characterization of Tool Wear in Friction Drilling. Journal of Tribology. 17: 93-103.

[7] Inagaki, I. and Takechi, T. 2014. Application and Features of Titanium for the Aerospace Industry, NIPPON STEEL & SUMITOMO METAL TECHNICAL REPORT No. 106.

[8] Gammon, L. M. and Briggs, R. D. 2004. Metallography and Microstructures of Nonferrous Alloys,ASME Handbook. Metallography and Microstructures. 4: 899-917.

[9] Voort, G. V. Metallographic Preparation of Titanium and its Alloys. In: Published by Buehler, a division of Illinois Tool Works. 3(3): 22-41.

[10] Miller, S. F. and Shih, A. J. 2006. Experimental and Numerical Analysis of the Friction Drilling Process. Journal of  Manufacturing Science and Engineering. 128: 802-810.

[11] Miller, S. F., Tao, J. and Shih A. J. 2006. Friction drilling of cast metals. International Journal of Machine Toolsand Manufacture. 46: 1526–1535.

[12] Özek, C. and Demir, Z. 2013. Investigate the Friction Drilling of Aluminium Alloys According to the Thermal Conductivity. TEM Journal. 2(1): 93-101.

[13] El-Bahloul, S. A. and El-Shourbagy, H. E. 2016. Effect of Tool Geometry, Feed Rate, and Rotational Speed of Thermal Friction Drilling Process on AISI304 Stainless Steel. Mansoura Engineering Journal (MEJ). 41(1): 9-15.

[14] Alphonse, M. and Raja, V. K. B. 2017. Evolution and Recent Trends in Friction Drilling Technique and the Application of Thermography. Frontiers in Automobile and Mechanical Engineering, Conf. Series: Materials Science and Engineering. 1: 197- 210.