In this paper,fluidity onset analysis in FG thick-walled spherical tanks under concurrent pressure loading and heat gradient has been presented. Designing thick-walled spherical tanks under pressure as tanks holding fluids under heat loads with high heat gradients require new approaches. Under high internal pressure and high temperature, the tank enters the plastic stage in a part of its thickness; hence, for designing, a tank, which necessitates the onset of fluidity, is required for pressure study and heat gradient. Elasticity module, tensile yield, heat flow coefficient and heat expansion coefficient change gradually and, according to the power model, along radial direction. In order to describe the material behavior in the plastic area in the FG thick-walled spherical tank under internal pressure and heat gradient, Treska yield index has been used, and materials’ behavior has been assumed to be in elastic-plastic form. تفاصيل المقالة

The non-asymmetric rolling process of copper and brass wire has been simulated with the Abaqus software. Presented finite element model in this simulation of rolling predicted output curvature and contact surface width in the non-asymmetric mode (in equality of diameter of rollers, the rotational speed of the rollers and the rollers’ surface finish). The material used in this research has strain hardening property. To evaluate of this study, obtained results are compared with analytical results of other researchers. Comparing the good coincidence of these two methods. تفاصيل المقالة