-
المقاله
1 - Thermodynamic Analysis of a Modified Two-Stage Trans-Critical CO2 Refrigeration Cycle with Multi Inter-Cooling SystemInternational Journal of Advanced Design and Manufacturing Technology , العدد 4 , السنة 10 , تابستان 2017Performance of a two-stage multi-inter-cooling trans-critical CO2 refrigeration cycle containing internal heat exchanger, two intercoolers, ejector, and separator, has been analyzed after modification. In the present study, an internal heat exchanger has been included w أکثرPerformance of a two-stage multi-inter-cooling trans-critical CO2 refrigeration cycle containing internal heat exchanger, two intercoolers, ejector, and separator, has been analyzed after modification. In the present study, an internal heat exchanger has been included within this cycle for possible improvement in its cooling performance. The impacts of operational parameters such as gas cooler and evaporator temperatures and gas-cooler pressure, on cycle performance have been investigated. Results are validated against those available in the literature. Comparisons of the results show that there is excellent agreement between them. Obtained results showed that modified cycle improved the maximum coefficient of performance (COP max), by 20.58% compared to the internal heat exchanger two-stage TRCC cycle and 23.2% compared to multi-inter-cooling two-stage TRCC cycle with ejector expansion device. Also, the total exergy destruction rate of the improved cycle is between its rates of two original cycles. تفاصيل المقالة -
المقاله
2 - Effects of Slip Boundaries on Mixed Convection of Al2O3-water Nanofluid in MicrocavityInternational Journal of Advanced Design and Manufacturing Technology , العدد 2 , السنة 8 , بهار 2015Due to the importance of the slip effect on modeling of microchannel and microcavity, numerical investigations have been introduced in this work for studying the mixed convection of Al2O3-water nanofluid in a square microcavity. Governing equations are discretized and s أکثرDue to the importance of the slip effect on modeling of microchannel and microcavity, numerical investigations have been introduced in this work for studying the mixed convection of Al2O3-water nanofluid in a square microcavity. Governing equations are discretized and solved using the Finite Volume Method and SIMPLER algorithm. The Knudsen number is selected between 0.001 and 0.1 to consider slip velocity and the temperature jump boundary conditions in slip flow regime. In this study we investigate the influence of the Knudsen number on the average Nusselt number and heat transfer rate of Al2O3-water nanofluid. Results shows that the average Nusselt number is the function of Richardson number, Knudsen number and volume fraction of nanoparticles. Increasing the Richardson number, makes the forced convection less effective and leads in reduction of the Nusselt number. Hence, increasing the Knudsen number, leads to the temperature gradient reduction and reducing the average Nusselt number. As a result, the average Nusselt number could be enhanced up to 10.93% by using nanoparticles in the base fluid. تفاصيل المقالة -
المقاله
3 - بررسی تأثیر میدان مغناطیسی، تغییرات شیب و شرط مرزی دمایی دیواره بر انتقال حرارت جابجایی طبیعی آب درون محفظهی مانع دارمهندسی مکانیک و ارتعاشات , العدد 1 , السنة 11 , بهار 1399در کار حاضر، اثر میدان مغناطیسی بر انتقال حرارت جابجایی طبیعی با استفاده از روش شبکه بولتزمن شبیهسازی شده است. دیواره عمودی سمت چپ محفظه در دمای ثابت گرم و دیواره عمودی سمت راست محفظه دارای سه شرط مرزی دمایی مختلف (۱- دمای ثابت سرد، ۲- دمای خطی و ۳-دمای ثابت گرم) است. أکثردر کار حاضر، اثر میدان مغناطیسی بر انتقال حرارت جابجایی طبیعی با استفاده از روش شبکه بولتزمن شبیهسازی شده است. دیواره عمودی سمت چپ محفظه در دمای ثابت گرم و دیواره عمودی سمت راست محفظه دارای سه شرط مرزی دمایی مختلف (۱- دمای ثابت سرد، ۲- دمای خطی و ۳-دمای ثابت گرم) است. دو دیواره دیگر محفظه در دمای ثابت سرد قرار دارند. مانعی لوزی شکل که در مرکز محفظه قرار دارد در چهار حالت مختلف (۱- سرد، ۲- رسانا، ۳- آدیاباتیک و ۴- گرم) بررسی میشود. همچنین دیواره پایینی محفظه در سه شیب متفاوت مورد ارزیابی قرار میگیرد. تأثیر پارامترهای عدد رایلی، عدد هارتمن، شیب دیواره، شرط مرزی دمایی مختلف دیواره و مانع لوزی شکل، بر روی انتقال حرارت جابجایی طبیعی بررسی شده است. نتایج نشان میدهد با ثابت ماندن تمامی پارامترها، افزایش شیب دیواره و عدد رایلی منجر به افزایش انتقال حرارت میشود. با تغییر شرایط مرزی دمایی دیوارهها و مانع میتوان بر روی میزان انتقال حرارت تأثیرگذار بود. بعلاوه افزایش قدرت میدان مغناطیسی سبب کاهش عدد ناسلت متوسط میشود که این تأثیر در شرایط مختلف، متفاوت است. تفاصيل المقالة