Subject Areas : journal of New Materials
حمید بختیاری
1
(کارشناسی ارشدمهندسی مواد گرایش جوشکاری، دانشکده مهندسی مواد، دانشگاه آزاد اسلامی، واحد نجف آباد، نجف آباد، ایران.)
محمدرضا خانزاده قره شیران
2
(استادیار، گروه مهندسی مواد، دانشگاه آزاد اسلامی، واحد شهر مجلسی، شهر مجلسی، اصفهان، ایران.)
سید علی اصغر اکبری موسوی
3
(دانشیار، دانشکده مهندسی متالورژی و مواد، پردیس دانشکده فنی، دانشگاه تهران، تهران، ایران.)
Keywords:
Abstract :
1- B. S. Zlobin, " Explosion Welding of Steel with Aluminum", Combustion, Explosion, and Shock Waves, Vol. 38, No. 3, pp. 374-377, 2002.
2- R. Kacar, and M.Acarer, "An Investigation on the Explosive Cladding of 316L Stainless Steel-Din-P355GH Steel", Materials Processing Technology, Vol. 153, PP. 91-96, 2009.
3- L. Tricarico, R. Spina, D. Sorgente, and M. Brandizzi, "Effects of heat treatments on mechanical Properties of Fe/Al Explosion-Welded Structural Transition Joints", Materials and Design, Vol. 30, pp. 2693-2700, 2009.
4- G. Temizel and M. Ozenbas, "Intermetallic Phase Formation at Fe-Al Film Interfaces", Turkish J. Eng. Env., PP.71-78, 2007.
5- S. Phengsakul, A. Rodchanarowan, " Effect of Thermal Treatment on Intermetallic Phases of Fe/Al Structural Transition Joints", Energy Procedia, Vol. 34, pp. 782 – 790, 2013.
6- B. S. Zlobin, " Explosion Welding of Steel with Aluminum", Materials and Design, Vol. 24, No. 3, pp. 617–622, 2003.
7- Tricarico L, Spina R, Sorgente D, Brandizzi M., "Effects of Heat Treatments on Mechanical Properties of Fe/Al explosionwelded", Structural Transition Joints. Materials and Design, Vol. 30, PP. 693-700, 2009.
8- Patterson, A., “Fundamentals of Explosion Welding”, ASM Handbook, Vol 6 Welding, Brazing, and Soldering, ASM International,USA, Pages 160-164, 1993.
9- A. Durgutlu, H. Okuyucu, B. Gulenc , " Investigation of Effect of the Stand-off Distance on Interface Characteristics of Explosively Welded Copper and Stainless Steel", Materials and Design, Vol. 29, pp. 1480-1484, 2008.
10- G.Temizel, " Intermetallic Phase Formation at Fe-Al Film Interfaces", Turkish J. Eng. Env. Sci. , Vol. 31, pp. 71-78, 2007.
11- T.I.Khan, S.A. Rizvi, K.Matsuura, "The Effect on Wear Behaviour of H13 tool Steel Surfaces Modified Using Atungesten arc Heat Source", Wear 2000, Vol.244, PP: 154-164.
12- I. Samardzic, B. Matesa, I. Kladaric, " The Influence of Heat Treatment on Properties of Three-Metal Explosion Joint: Almg-Al-steel", Metabk, Vol. 50, pp. 159-162, 2011.
13- F. Findik, R. Yilmaz and T. Somyurek, "The effects of Heat Treatment on the Microstructure and Microhardness of Explosive Welding", Scientific Research and Essays, 8 September, Vol. 6(19), pp. 4141-4151, 2011.
14- J. Lokaj, M.Benak, " X ray Microanalysis of Al-austenitic Steel Boundary Formed by Explosion Welding", Metal, Vol. 5, PP. 18-20, 2010.
15- "Standard Guide for Preparation of Metallographic Specimens", ASTM E3-11, philadelphia, 2012.
16- "Standard Practice for Microetching Metals and Alloys", ASTM E407, philadelphia, 2012.
17- "Standard Guide for Reflected-Light Photomicrography ", ASTM E883-11, Philadelphia, 2012.
18- "Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section ", ASTM B487-02, Philadelphia, 2012.
19- "Standard test Method fot Tension Shear ", ASTM D 3165-95, Philadelphia, 2012.
20- "Standard Test Method for Knoop and Vickers Hardness of Materials ", ASTM E384-11, Philadelphia, 2012.
21- س.ع.ا. اکبری موسوی، ا.ع. آماده، ا. فتحی یونسی، "بررسی جوشکاری افنجاری کامپوزیت سه لایه MS90/St14/ Ms90"، پایان نامه کارشناسی ارشد، دانشکده فنی دانشگاه تهران، 1387.
22-N.Kahraman, B.Gulence, "Micro Structural and Mechanical Properties of Cu-Ti Plates Bonded Through Explosive Welding Process", Materials processing Technology,Vol. 169, PP. 67-71, 2005.
23- س.ع.ا. اکبری موسوی، م.نوروزپور، ا.ملکی، "بررسی فصل مشترک جوشکاری اتصال لایه ورق های آلومینیم 5083/آلومینیم1250/فولاد دریایی"، علمی پژوهشی مواد پرانرژی، سال سوم، 1387.
24- M.Benak, M. Turna, M. Ozvold, P. Nesvadba, J. Lokaj, L. Caplovic, F. Kovac, V.Stoyka, "Study of Al-austenitic steel Boundary Formed by Explosion Welding", Roznov Pod Radhostem Czech Republic, Vol. 18, 2010.
25- M.Acarer, B.Gulenc, F. Findik, " Investigation of Explosive Welding Parameters and Their Effects on Microhardness and Shear Strength", Materials and Design, Vol. 24, pp. 659-664, 2003.
26- L. Tricarico, R. Spina, "Mechanical Strength of Fe/Al Structural Transition Joints Subject to Thermal Loading", Archives of Materials Science and Engineering, Vol. 37, pp. 85-93, 2009.
27- ع. دشتی ، ا. حلوایی، "بررسی اثر عملیات حرارتی بر استحکام اتصال آلومینیم به فولاد در جوش انفجاری"، هفتمین سمینار ملی مهندسی سطح و عملیات حرارتی، دانشگاه صنعتی اصفهان، 1385.
28- S.A.A.Akbari Mousavi, and P. farhadi sartangi," Effect of Post-weld Heat Treatment on the Interface Microstructure of Explosively Welded Titanium-Stainless Steel Composite", Material Science and Engineering A, Vol. 494, PP. 329-336, 2008.
29- م.زرچی، "بررسی عملیات حرارتی بر خواص مکانیکی مقطع جوش فولاد 4140"، مجله مواد نوین مرودشت، جلد سوم، شماره چهارم، 1392.
30- ا. ساعتچی، ر. ماموری، " نفوذ در جامدات،دانشگاه تربیت مدرس"، 1372.
31- B.Crossland, "Explosive Welding of Metals and Its Applications", Oxford Science Publication.
32- S.r.Reid, "Wake Instability Mechanism for Wave Formation in Explosive welding", Int. Journal of Mechanical science, 1978.
33- E. Esquivel, Lawrence, E.Murr, St. Stafford, "Fundamental Microstructural Issue Associated with Severe Plastic Deformation: Application of Transmission Electron Microscopy", P.H.D Thesis, University of Texas, 2005.
34- N. Kengkla and N. Tareelap, " Role of Intermetallic Compound on Crrosion of Aluminium/Steel Transition Joint Used in Naval Applications", 1st Mae FahLuang University International Conference 2012.
