Low Latency and Power Efficient Reversible Full Adder based on Toffoli Gates

Seyedeh Fatemeh Deymad ¹ (Department of Electrical Engineering, Shiraz Branch, Islamic Azad University, Shiraz Iran) Nabiollah Shiri ² (Islamic Azad University Shiraz Branch)
Farshad Pesaran ³ (Islamic Azad University, Shiraz Branch)

Submited date : 2023-06-09 accepted date : 2023-07-15

Keywords: ripple carry adder, High speed, Low power, Toffoli gate. reversible design, Full adder,

Abstract :

The reversible circuits are useful in energy-saving applications because of their unique features. Hence, using 32 nm carbon nanotube field-effect transistor (CNTFET) technology and relying on Toffoli's reversible gates, a new full adder (FA) circuit is presented. The proposed circuit has 4 basic Toffoli gates and 18 transistors. 3 of the 4 gates have the same transistor schematic with a constant-ON transistor, but the remaining gate has only two transistors. The proposed circuit has 3 constant inputs and 4 garbage outputs. As a new method, in the proposed circuit, only one type of reversible gate is used. The results show the superiority of the proposed FA in terms of power consumption and energy dissipation. By implementing the proposed FA and other circuits in a 4-bit and 8-bit ripple carry adder (RCA), the proposed circuit shows improvements by 6.83% and 11.25% in terms of power and energy, respectively, compared to the main competitor. Also, in an 8-bit RCA, the proposed FA has a 2% saving compared to the nearest competitor and 27% compared to the worst circuit in terms of the power-delay-area-product (PDAP). These results show the designed FA as a favorable option for complex structures with high-order bits.

References:


[1] A. Sadeghi, R. Ghasemi, H. Ghasemian and N. Shiri, “High Efficient GDI-CNTFET-Based Approximate Full Adder for Next Generation of Computer Architectures,” IEEE Embedded Systems Letters, vol. 15, no. 1, pp. 33-36, March 2023, doi: 10.1109/LES.2022.3192530.

[2] A. Sadeghi et al., “Voltage over-scaling CNT-based 8-bit multiplier by high-efficient GDI-based counters,” IET Comput. Digit., Tech., vol. 17, pp. 1– 19, Nov. 2023, doi:. 10.1049/cdt2.12049.

[3] N. Shiri, A. Sadeghi, M. Rafiee and M. Bigonah, “SR-GDI CNTFET-based magnitude comparator for new generation of programmable integrated circuits,” Int J Circ Theor., vol. 50, no. 5, pp. 1511- 1536, Apr. 2022, doi: 10.1002/cta.3251.

[4] M. Rafiee, N. Shiri and A. Sadeghi, “High-Performance 1-Bit Full Adder With Excellent Driving Capability for Multistage Structures,” IEEE Embedded Systems Letters, vol. 14, no. 1, pp. 47-50, March 2022, doi: 10.1109/LES.2021.3108474.

[5] M. Sayyaf, A. Ghasemi and R. Hamzehyan, “Design of Low Power Single-Bit Full-Adder Cell Based on Pass-Transistor Logic,” Journal of Southern Communication Engineering, vol. 13, no. 49, pp. 105-112, 2023, doi: 10.30495/jce.2022.692834.

[6] H. Arfavi, S. M. Riazi and R. Hamzehyan, “Evaluation of temperature, Disturbance and Noise Effect in Full Adders Based on GDI Method,” Journal of Southern Communication Engineering, vol. 13, no. 50, pp. 47-66, 2023, doi: 10.30495/jce.2023.1973764.1197.

[7] S. Raveendran, P. J. Edavoor, N. Y. B. Kumar and M. H. Vasantha, “An Approximate Low-Power Lifting Scheme Using Reversible Logic,” in IEEE Access, vol. 8, pp. 183367-183377, 2020, doi: 10.1109/ACCESS.2020.3029149.

[8] M. Haghparast and K. Navi, “A Novel Reversible Full Adder Circuit for Nanotechnology Based Systems,” Journal of Applied Sciences, vol. 7, no. 24, pp. 3995-4000, Dec. 2007, doi: 10.3923/jas.2007.3995.4000.

[9] M .C. Parameshwara and M. Nagabushanam, “Novel low quantum cost reversible logic based full adders for DSP applications,” Int. j. inf. tecnol., no. 13, pp. 1755–1761, Aug. 2021, doi: 10.1007/s41870-021-00762-3.

[10] L. Ni, Z. Guan and W. Zhu , “A general method of constructing the reversible full-adder,” in Proceedings of 3rd International Symposium on Intelligent Information Technology and Security Informatics, Jinggangshan, China, 2010, pp. 109–113, doi: 10.1109/IITSI.2010.25.

[11] M. D. Hafiz, H. Babu, M. D. R. Islam, A. R. Chowdhury and S. M. A. Chowdhury, “On the realization of reversible full-adder circuit,” International Conference on Computer and Information Technology, Dhaka, Bangladesh, 2003, pp. 880-883.

[12] M. Aditya, Y. B. N. Kumar and M. H. Vasantha, “Reversible full/half adder with optimum power dissipation,” 10th International Conference on Intelligent Systems and Control (ISCO), 2016, pp. 1-4, doi: 10.1109/ISCO.2016.7726975.