-
مقاله
1 - Effect of textural properties of Ni (Nano)-supported catalysts on the selective benzene hydrogenation in the vapor phaseIranian Journal of Catalysis , شماره 4 , سال 9 , تابستان 2019Ni catalysts supported on Nano porous catalysts were prepared by the impregnation method and tested for vapor phase hydrogenation of benzene. The textural and physico-chemical properties of Ni catalysts were characterized by the X-ray diffraction, Fourier-transform infr چکیده کاملNi catalysts supported on Nano porous catalysts were prepared by the impregnation method and tested for vapor phase hydrogenation of benzene. The textural and physico-chemical properties of Ni catalysts were characterized by the X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscope and N2 adsorption-desorption analysis. The catalytic evaluation revealed that the best selectivity to benzene (> 84%) and high stability with the low coke deposition (< 1.1%) are related to Ni/Folded Sheets Mesoporous Materials-No. 16. The kinetics of benzene hydrogenation has been examined as a function of benzene and hydrogen pressures at various temperatures. Two kinetic models based on power law and Langmuir-Hinshelwood mechanisms were developed for the reaction and compared with the obtained experimental data. The apparent kinetic parameters were estimated using the multiple regression analysis. Both these models present the good results. پرونده مقاله -
مقاله
2 - Optimization of main parameters affecting activity and octane number produced from catalytic isomerization of n-heptane using response surface methodologyIranian Journal of Catalysis , شماره 2 , سال 13 , بهار 2023In this work, the Response Surface Methodology (RSM) was investigated by applying the Design of the Experiment in normal heptane isomerization. The design was guided to three surface responses on the dependency of normal heptane conversion, isomerization selectivity, an چکیده کاملIn this work, the Response Surface Methodology (RSM) was investigated by applying the Design of the Experiment in normal heptane isomerization. The design was guided to three surface responses on the dependency of normal heptane conversion, isomerization selectivity, and research octane number on the reaction temperature (200 - 350 °C), the weight percentage of protonated Zeolite Socony Mobil–5 (HZSM-5) zeolite in catalyst structure (10 - 40 weight percent) and time on stream (1 - 6 h). The Analysis of Variance for Pt-supported micro/mesoporous catalysts indicated that the reaction temperature was the prominent significant variable in normal heptane conversion, the development of isomers, and research octane number followed by weight percent of HZSM-5 and time on stream. The optimum research octane number predicted from the response surface analysis is ~ 61 at the reaction temperature of 350 °C, weight percent of HZSM-5 of 25%, and time on stream of 1 h. پرونده مقاله -
مقاله
3 - تهیه، شناسایی و بررسی عملکرد کاتالیستهای میکرو/مزوپور Pt/A type-HMS در فرایند تبدیل نرمالهپتانپژوهش های کاربردی در شیمی , شماره 4 , سال 14 , پاییز 1399در کار حاضر، رفورمینگ فاز گازی نرمالهپتان برای بررسی فعالیت کاتالیستی چندسازههای میکرو/مزوحفره به کارگرفته شد. اثر ساختار این کاتالیستها بر درصد تبدیل نرمالهپتان و گزینشپذیری نسبت به فراورده های متفاوت اعم از فراورده های همپار چندشاخه و تکشاخه و فراور چکیده کاملدر کار حاضر، رفورمینگ فاز گازی نرمالهپتان برای بررسی فعالیت کاتالیستی چندسازههای میکرو/مزوحفره به کارگرفته شد. اثر ساختار این کاتالیستها بر درصد تبدیل نرمالهپتان و گزینشپذیری نسبت به فراورده های متفاوت اعم از فراورده های همپار چندشاخه و تکشاخه و فراوردههای کراکینگ بررسی شد. روشهای شناسایی متفاوت، مانند پراش پرتو ایکس (XRD)، فلوئورسانس پرتو ایکس (XRF)، طیفسنجی فروسرخ تبدیل فوریه (FTIR)، طیفسنجی UV–Vis بازتابی پخشیده (UV-Vis DRS)، تجزیه وزنسنجی گرمایی/ گرمایی تفاضلی (TGA/DTA) و اندازهگیریهای جذب-واجذب نیتروژن برای شناسایی کاتالیستها استفاده شدند. فعالیت و پایداری کاتالیستی در تبدیل نرمالهپتان برای مواد چندسازه پلاتیندارشده میکرو/ مزوحفره تشکیلشده از بخش مزوحفره ای HMS (سیلیکا مزوحفره ای شش وجهی) و بخش میکروحفره ای زئولیتهای A شامل A۳، A۴ و A۵، بسیار نزدیک به هم بود. هرچندکه، نتایج نشان داد گزینشپذیری نسبت به تشکیل همپارها بهطور عجیبی برای کاتالیست چندسازه Pt/4A-HMSبالا است. نتایج نشان میدهند که عامل مؤثر بر عملکرد کاتالیستی، مقدار آلومینیم (یا نسبت Si/Al) موجود در ساختار کاتالیستهای تهیهشده است. پرونده مقاله