-
مقاله
1 - طراحی یک نوسانساز کنترلشونده با ولتاژ دارای قابلیت ایجاد دو باند فرکانسی مجزا با استفاده از فناوری مایکرواستریپروشهای هوشمند در صنعت برق , مقالات زودآینددر این مقاله، از فیلتر میانگذر دوبانده میکرواستریپ برای طراحی یک نوسانساز با نویز فاز پایین استفاده شده است. نوسانساز طراحی شده ساخته و آزمایش شده است. این فیلتر که میتواند فرکانس را تثبیت کند، در حلقه فیدبکی نوسانساز با نویز فاز کم پیادهسازی شده است. نویز فاز با چکیده کاملدر این مقاله، از فیلتر میانگذر دوبانده میکرواستریپ برای طراحی یک نوسانساز با نویز فاز پایین استفاده شده است. نوسانساز طراحی شده ساخته و آزمایش شده است. این فیلتر که میتواند فرکانس را تثبیت کند، در حلقه فیدبکی نوسانساز با نویز فاز کم پیادهسازی شده است. نویز فاز با طراحی نوسانساز در پیک تاخیر گروه فیلتر میانگذر بصورت چشمگیری کاهش یافته است. علاوه بر این، نوسانساز طراحی شده را میتوان به یک نوسانساز کنترلشونده با ولتاژ تغییر ساختار داد، به اینصورت که یک ورکتور به یک تشدیدکننده T شکل فیلتر میانگذر دوبانده متصل می شود. فرکانسهای مرکزی 95/1 و 45/5 گیگاهرتز برای این نوسانساز به دست آمده است. این فرکانسها بصورت مجزا و غیرهمزمان میباشند. در فرکانس مرکزی 95/1 گیگاهرتز، نویز فاز 12/173- dBc/Hz در فرکانس آفست 1 مگاهرتز اندازهگیری شده است. کاربرد دقیق این باندهای فرکانسی در شبکههای رادیویی UMTS و WiMAX میباشد. علاوه بر این، فرکانس نوسانساز کنترلشونده با ولتاژ طراحی شده را میتوان در محدوده 05/2-84/1 گیگاهرتز تنظیم کرد، که در آن نویز فاز اندازهگیری شده در فرکانس آفست 1 مگاهرتز از 122- به 5/146- dBc/Hz افزایش مییابد. در این مقاله تحلیل مونت کارلو نیز انجام شده است که با تلرانس 5 درصد تمامی استابها با احتمال بیش از 84 درصد جواب قطعی حاصل شده است. پرونده مقاله -
مقاله
2 - A New Method for ECG Denoising Using an Amalgamation of Adaptive and SG FiltersSignal Processing and Renewable Energy , شماره 2 , سال 6 , بهار 2022Since ECG signals are non-stationary physiological, the recorded signals are corrupted by varied noise resources. So, they cannot be used to diagnose the illness. Separating signals from undesired noise such as motion artifact, power-line interference (PLI), and baselin چکیده کاملSince ECG signals are non-stationary physiological, the recorded signals are corrupted by varied noise resources. So, they cannot be used to diagnose the illness. Separating signals from undesired noise such as motion artifact, power-line interference (PLI), and baseline wander (BW), is the main problem when analyzing medical data. These destructive effects are more severe, especially during the patient's physical activity. The objective of this research is to find effective ways to remove anomalies in the cardiac signal. In this paper, a method for noise reduction has been presented. In this regard, the noise reduction from heart signal, is improved using an amalgamation adaptive and Savitsky-Golay filter. Also, the presented ANC is modified by combining with a SG filter as suggested ECG noise cancelation (A-S) system. Findings demonstrate that the suggested A-S is more accurate and adequate compared to the previous methods. پرونده مقاله -
مقاله
3 - Miniaturized Ultra-wide Stopband Bandpass Filter for WiMAX ApplicationsSaeid Jafari Farzin Shama Abbas Ghadrdan Mohammad Saeed Feali Mohammad Amir Korani Mohammad Amir SattariSignal Processing and Renewable Energy , شماره 2 , سال 8 , بهار 2024In this research, a miniaturized narrow-band bandpass filter is presented. The design procedure has been started using a coupled structure and the final circuit has been bent to reduce the circuit size. The operational frequency is located at 3.6 GHz with an acceptable چکیده کاملIn this research, a miniaturized narrow-band bandpass filter is presented. The design procedure has been started using a coupled structure and the final circuit has been bent to reduce the circuit size. The operational frequency is located at 3.6 GHz with an acceptable sharpness in the transition bands. In the passband, both the insertion and return loss are 0.6 and 27 dB, respectively. The obtained fractional bandwidth of the filter is about 2%, which is highly appropriate for a special-purpose narrow-band BPF. The presented BPF has been fabricated on an RT/Dourid5880 substrate. The obtained results of the fabricated circuit are consistent with the simulation one. پرونده مقاله