List of Articles Composite

• Open Access Article
  • Abstract Page
  • Full-Text
  
  1 - Influence of chemical properties of liquid environment on the physical characteristics of laser ablation produced tungsten nanostructures
  Zohreh Famili Davoud Dorranian Amir Hossein Sari
  10.30495/jtap.162227
• Open Access Article
  • Abstract Page
  • Full-Text
  
  2 - Comparative study of behavior of electrical conductivity in KI‒Al2O3 and KI‒TiO2 heterostructure composites
  Suhail Iqbal Wani Nazli Zeeshan  Rafiuddin
  10.1007/s40094-020-00394-1
• Open Access Article
  • Abstract Page
  • Full-Text
  
  3 - Modeling Financial return with Markov Time-Varying Mixed Normal GARCH Model
  Shirin Alipour Fatemeh Azizzadeh Khosro Manteghi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  4 - Study of the biodegradability and thermal properties of wood-plastic composite obtained from wood flour, polyhydroxybutyrate and starch
  Hoda Norouzpour Amir hooman Hemmasi Mohammad Talaeipoor Behzad Bazyar Majid Abdous
  10.30495/jrnr.2023.73257.10289
• Open Access Article
  • Abstract Page
  • Full-Text
  
  5 - Investigation of the effect of compatibilization of oxidized polypropylene in molten phase on the mechanical, physical, and morphological properties of reed plant flour-high density polyethylene composite
  Mohammad Shamsian Mohammad Dahmardeh Ghalehno Fatemeh Dehdast Seyedeh Rahil Chalakeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  6 - Ultrasonic Assisted Removal of humic acids (HAs) from aqueous solutions on Uultrasonically polysulfone/ X% Fe2O3 mixed matrix membrane, An Experimental Design Methodology
  Fereydoon Khazali Shahnaz Davoudi
  10.30495/jptc.2023.72322.1258
• Open Access Article
  • Abstract Page
  • Full-Text
  
  7 - Ultrasonic Assisted Removal of Methyl Paraben on Ultrasonically Synthesized Zn(OH)2-NPs-AC: Experimental Design Methodology
  Amir Abbas Ghazali
  10.30495/jptc.2021.20874
• Open Access Article
  • Abstract Page
  • Full-Text
  
  8 - حذف رنگ بنفش کریستال با استفاده از جاذب سنتزی سیکلودکسترین اصلاح شده با نانو ذرات اکسید آهن و به کمک امواج فراصوت؛ با متدلوژی طراحی تجربی
  Ali Omaniziarati Gholamhossein Vatankhah
  10.30495/jptc.2021.20426
• Open Access Article
  • Abstract Page
  • Full-Text
  
  9 - Response Surface Methodology for Removal of Butyl Paraben Dye Using Zeolitic Imidazolate-67 Modified by Fe3O4 Nanoparticles from Aqueous Solutions
  Arezoo Ghadi Mohammad Pourmohammad Ali Aghababai Beni
  10.30495/jptc.2023.71309.1250
• Open Access Article
  • Abstract Page
  • Full-Text
  
  10 - Removal of methylene blue dye by application of polyaniline nano composite from aqueous solutions
  M. Banimahd Keivani K. Zare H. Aghaie R. Ansari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  11 - Application of Electroactive Nano Composite Coated onto Wood Sawdust for the Removal of Malachite Green Dye from Textile Wastewaters
  M. H. Fekri M. Banimahd keivani M. Darvishpour H. Banimahd keivani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  12 - Sodium alginate-chitosan composite film for chicken fillet packaging: investigation of its physicochemical and microbial characteristics
  Milad Ranjbar Mohammad Hossein Azizi Tabrizzad Gholamhassan Asadi Hamed Ahari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  13 - Extraction and Determination of Diazinon Poison by NiZnS-C Nanoparticles by Ultrasound Microextraction and Experimental Design from Environmental Waters
  Saeid Khodadoust Mohammad Sharif Talebiyanpour
  10.30495/jest.2021.50606.4981
• Open Access Article
  • Abstract Page
  • Full-Text
  
  14 - Evaluation of Coagulation and Flocculation Process in Removal of Heavy Metals from Chemical Wastewater of Mobarakeh Steel Complex
  Masoud Taheriyoun Alireza Memaripour
  10.22034/jest.2019.7721.1635
• Open Access Article
  • Abstract Page
  • Full-Text
  
  15 - Comparison of magnetic properties and adsorption capability of synthesized magnetic Graphene oxide Nano-composite via co-precipitation and solvo-thermal methods
  Fatemeh Einollahipeer Nader Bahramifar Habibollah Unesi
  10.22034/jest.2021.32045.4015
• Open Access Article
  • Abstract Page
  • Full-Text
  
  16 - Investigation of Changes in Physical Properties of Bitumen Composite by Adding Recycled Materials
  seyed sharafoddin hosseini Simin Rad
  10.30495/jest.2022.61619.5431
• Open Access Article
  • Abstract Page
  • Full-Text
  
  17 - Influence of Crop Pattern Correction on Reducing Fertilizer’s Effects of Agricultural Activities: A Case Study in Fars Province
  Shahryar Nasabian Hamid Mohammadi Alireza Keikha
• Open Access Article
  • Abstract Page
  • Full-Text
  
  18 - Study on Thickness Swelling of Wood Plastic Composites Made From Beech Wood Flour-Polypropylene
  Shokooh Etedali Behbood Mohebby Mehdi Tajvidi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  19 - Screening and Optimization of Microextraction of Pb(II) by Inductively Coupled Plasma-Atomic Emission Using Response Surface Methodology
  Maryam Salahinejad Fereidoon Aflaki
• Open Access Article
  • Abstract Page
  • Full-Text
  
  20 - Ultrasonic Assisted Adsorption of Rhodamine B (RhB) Dye by Albizia Stem Bark Lebbeck Modified by Fe2 (MoO4)3 Nanocomposite Synthesis: Experimental Design Methodology
  Shiva Enolghozati Nasrin Choobkar Elham Pournamdari Farzaneh Marahel
• Open Access Article
  • Abstract Page
  • Full-Text
  
  21 - Synthesis of Magnetic Iron-Oxide Nanofiber Composite using Electrospinning: An Absorbent for Removal of Nitrate from Aqueous Solution
  Elham Ezzatzadeh Masoumeh Meskinfam Langroudi Farhad Jokari Sheshdeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  22 - Preparation, Structural and Magnetic Behavior of Sr(AlCr)xFe(12-2x) O19 Hexagonal Ferrites
  Mahboobeh Alimoradi Mohammad Yousefi Babak Sadeghi Mostafa M.Amini Alireza Abbasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  23 - Removal of Benzyl Paraben from Wastewater Using Zeolitic Imidazolate-67 Modified by Fe3O4 Nanoparticles with Response Surface Methodology
  Mohammad Pourmohammad Arezoo Ghadi Ali Aghababai Beni
• Open Access Article
  • Abstract Page
  • Full-Text
  
  24 - An Investigation on Dynamical and Mechanical Properties of Hybrid Composite of Epoxy Matrix Reinforced with Sglass Fiber and Aluminum Sheet
  k Kolahgar Azari A Alizadeh H Omidvar A Sayadi Kelemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  25 - Analysis of the Free Edge Effect of a Composite Laminate under Axial Tensile Load According to the Environmental Properties of the Composite Materials
  S Ebadi E Anbarzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  26 - Design and Optimization of Metal Matrix Composite (MMC’S) Spur Gear
  Purushottam Karthik Janaswamy Rohith Sai Tunuguntla Sai Praneeth Singu
• Open Access Article
  • Abstract Page
  • Full-Text
  
  27 - Fabrication of AA1060/Al2O3 Composites by Warm Accumulative Roll Bonding Process and Investigation of its Mechanical Properties and Microstructural Evolution
  M. Heydari Vini P. Farhadipour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  28 - Flow Study of Wood Plastic Composite Through a Circular Die in an Extrusion Process
  N. Jafarian Jam E. Soury
• Open Access Article
  • Abstract Page
  • Full-Text
  
  29 - Mechanical Properties and Microstructural Evolution of AA5083/Al2O3 Composites Fabricated by Warm Accumulative Roll Bonding
  Mohammad Heydari Vini M. Sedighi Mehdi Mondali
• Open Access Article
  • Abstract Page
  • Full-Text
  
  30 - Surface Characteristics Improvement of AZ31B Magnesium by Surface Compositing with Carbon Nano-tubes through Friction Stir Processing
  M. Soltani M. Shamanian B. Niroumand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  31 - Effect of Rotational Speed on Wear Behavior and Mechanical Properties of Friction Stir Welded AA6061+15%Al2O3p Metal-Matrix Composite
  Moslem Paidar Mojtaba Jafarian Mohsen Salehi Mohammad Saeed Khakpash
• Open Access Article
  • Abstract Page
  • Full-Text
  
  32 - Field Performance of Inlet Liner for Centrifugal Slurry Pump Manufactured by NR/PBR Nanocomposite
  Puya Afsharjahanshahi Seyed Yousef Ahmadi-Brooghani Mehdi Raghebi Mohammad Ali Karimi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  33 - Effect of Important Physical and Geometrical Parameters on the Dynamic Response of Thick Composite Plates with Smart Attached Mass
  Ali Pourmoayed keramat Malekzadeh Fard naser zolghadr
• Open Access Article
  • Abstract Page
  • Full-Text
  
  34 - Investigation on Failure Loads and Failure Modes for Two Parallel Pin-Loaded Holes Made from Unidirectional Glass-Epoxy Nanoclay Laminates
  sajjad dehghanpour keivan hosseini safari Farzan Barati Mohammadmahdi Attar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  35 - Fabrication of Aluminum/Gr Composites and Investigation of its Tribological and Wear Properties
  Mohammad Heydari Vini
  10.30486/admt.2023.1963487.1369
• Open Access Article
  • Abstract Page
  • Full-Text
  
  36 - Influence of Al2O3 Additive on Mechanical Properties of Wollastonite Glass-Ceramics
  Monavvar Rahimi Babak Sadeghi Maryam Kargar Razi
  10.30495/admt.2021.1913578.1226
• Open Access Article
  • Abstract Page
  • Full-Text
  
  37 - Behavior of Lightweight Smart Sandwich Panels Subjected to Tensile and Bending Loads- An Experimental Study
  sameera Khalili s. Mohammad Khalili Reza Eslami Farsani Puneet Mahajan
  10.30486/admt.2022.1937484.1302
• Open Access Article
  • Abstract Page
  • Full-Text
  
  38 - Numerical Investigation of the Grid Geometry Effect on the Modal Response and Buckling of Grid-Stiffened Composite Conical Structure
  Mohammad Reza Zamani Mohsen Zaretabar Hossein Parsa Mohsen Heydari Beni
  10.30495/admt.2021.1921748.1245
• Open Access Article
  • Abstract Page
  • Full-Text
  
  39 - Effect of Inter-Cavity Spacing and Heat Treatment in Friction Stir Processing/Welding (FSP/FSW) Al7075 Composites Containing Al2O3 and Graphene Nanomaterials using Charpy Impact Test
  Ali Hosseinzadeh Mahmoud Shariati Danial Ghahremani-moghadam Mohammad Reza Maraki
  10.30486/admt.2022.1943233.1321
• Open Access Article
  • Abstract Page
  • Full-Text
  
  40 - Predicting Anger Control and Positive Attitude towards Delinquency Considering the Components of Affective and Emotional Composite Temperament Model (AFECT) in Secondary School Students
  parisa moradikelardeh sajjad basharpoor
  10.30486/jsrp.2020.1898455.2423
• Open Access Article
  • Abstract Page
  • Full-Text
  
  41 - comparison of microleakage of filled sealant, Giomer and flow composite in sealant therapy of permanent teeth: An invitro study
  Leila Najafzadeh Davoud Ghasemi Romina  Mazaheri
  10.30486/COFS.2024.904444
• Open Access Article
  • Abstract Page
  • Full-Text
  
  42 - Comparison of Fracture Strength in Endodontically Treated Teeth Restored with Bulk fill, Bulk Fill Flowable and Conventional Composite with or without Using Ribbon Fibers
  Amin Seidy Parvin Mirzakouchaki Leila Pishevar
  10.30486/cofs.2023.1989843.1010
• Open Access Article
  • Abstract Page
  • Full-Text
  
  43 - Comparison of flexural strength and surface roughness of temporary crowns made by conventional and digital methods
  Mansureh sadat  Abtahi Mehrdad Barekatain Mehrdad kazemian Fereshteh Shahri
  10.30486/COFS.2024.904452
• Open Access Article
  • Abstract Page
  • Full-Text
  
  44 - Vibrations of Multi-Layer Beam with Nanocomposite Face Sheets Reinforced with Graphene Platelets and Porous Core
  A Mihankhah Zahra Khoddami Maraghi Ali Ghorbanpour Arani Shahriar  Niknejad
  https://doi.org/10.60664/jsm.2023.2091751
• Open Access Article
  • Abstract Page
  • Full-Text
  
  45 - Vibration Behavior of Thick Sandwich Composite Beam with Flexible Core Resting on Incompressible Fluid Foundation
  M Khosravi Saeed  Jafari Mehrabadi Keramat  Malekzadeh Fard
  https://doi.org/10.60664/jsm.2023.1081715
• Open Access Article
  • Abstract Page
  • Full-Text
  
  46 - Comparative Analysis of Energy Absorption Capacity of Single and Nested Metal Matrix Composite Tubes Under Quasi-Static Lateral and Axial Loading
  S Dehghanpour K Hosseini Safari F Barati M.M Attar
  10.22034/jsm.2020.1889852.1537
• Open Access Article
  • Abstract Page
  • Full-Text
  
  47 - Thermal and Mechanical Properties of Hybrid Composite Strengthened by Carbon Fibers/Aramid Fibers
  F Basati M.H Yas
  https://doi.org/10.60664/jsm.2023.3011762
• Open Access Article
  • Abstract Page
  • Full-Text
  
  48 - Multiscale Analysis of Transverse Cracking in Cross-Ply Laminated Beams Using the Layerwise Theory
  W Jin Na J.N Reddy
• Open Access Article
  • Abstract Page
  • Full-Text
  
  49 - Thermal Vibration of Composites and Sandwich Laminates Using Refined Higher Order Zigzag Theory
  A Chakrabarti S.K Singh A.H Sheikh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  50 - Dynamic Stability of Laminated Composite Plates with an External Smart Damper
  M Hoseinzadeh J Rezaeepazhand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  51 - Surface Degradation of Polymer Matrix Composites Under Different Low Thermal Cycling Conditions
  A.R Ghasemi M Moradi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  52 - Hygrothermal Analysis of Laminated Composite Plates by Using Efficient Higher Order Shear Deformation Theory
  S.K Singh A Chakrabarti
• Open Access Article
  • Abstract Page
  • Full-Text
  
  53 - Thermal Stress Analysis of a Composite Cylinder Reinforced with FG SWCNTs
  A Ghorbanpour Arani S Amir V Sadooghi M Mohammadimehr
• Open Access Article
  • Abstract Page
  • Full-Text
  
  54 - Electro-Thermo-Mechanical Vibration Analysis of a Foam-Core Smart Composite Cylindrical Shell Containing Fluid
  A Ghorbanpour Arani R Kolahchi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  55 - Wave Propagation Analysis of CNT Reinforced Composite Micro-Tube Conveying Viscose Fluid in Visco-Pasternak Foundation Under 2D Multi-Physical Fields
  A. H Ghorbanpour Arani M.M Aghdam M.J Saeedian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  56 - Two-dimensional Axisymmetric Electromechanical Response of Piezoelectric, Functionally Graded and Layered Composite Cylinders
  T Kant P Desai
• Open Access Article
  • Abstract Page
  • Full-Text
  
  57 - Failure Criteria Analysis of Laminate Composite Materials
  L Nourine A Sahli S Sahli
• Open Access Article
  • Abstract Page
  • Full-Text
  
  58 - Free Vibration Analysis of Variable Stiffness Composite Laminates with Flat and Folded Shapes
  B Daraei S Hatami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  59 - An Experimental Investigation on Fracture Analysis of Polymer Matrix Composite under Different Thermal Cycling Conditions
  A.R Ghasemi M Moradi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  60 - Coupled Vibration of Partially Fluid-Filled Laminated Composite Cylindrical Shells
  M.R Saviz
• Open Access Article
  • Abstract Page
  • Full-Text
  
  61 - Delineation of hydrothermal alteration zones for porphyry systems utilizing ASTER data in Jebal-Barez area, SE Iran
  Sara Fakhari Alireza jafarirad Peyman Afzal Mohammad Lotfi
  10.30495/ijes.2019.664780
• Open Access Article
  • Abstract Page
  • Full-Text
  
  62 - Synthesis of cobalt oxide and cobalt ferrite nanoparticles by hydrothermal method and investigation of tensile properties of polymer matrix composites made with these nanoparticles
  Ayfan Salah Hassan Mohammad Moarrefi romeileh Azadeh Aezami
• Open Access Article
  • Abstract Page
  • Full-Text
  
  63 - Novel TiO2 NPs Loaded on Activated Carbon as a Green and High Efficient Absorbent: Synthesis, Characterization, Kinetic and Equilibrium Studies of the Adsorption of Bismarck Brown and Thymol Blue from Aaqueous Solutions
  Saideh Bagheri Hossein Aghaei Mehrorang Ghaedi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  64 - Making epoxy/copper ferrite and copper hydroxide composite using nanoparticles synthesized by hydrothermal and ultrasonic method and checking the thermal properties of composites
  Elaf ayad Kamel Aljahlavi Mohammad Moarrefi Romeileh Azadeh Azami Gheymasi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  65 - Synthesis of NiO and NiFe2O4 nanoparticles by ultrasonic method and investigation of microhardness of polymer composites made with these nanoparticles and epoxy resin
  Narjes Karim jabber jaber Mohammad Moarrefi romeileh Nasrin ghazkoob
• Open Access Article
  • Abstract Page
  • Full-Text
  
  66 - Analysis of strain and stress in composite layered plate using shear deformation theory and secant function
  Iman Najimi Saeed Jafari Mehrabadi Peyman Yousefi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  67 - Investigating the removal of heavy metals using nanoclay composite stabilized on chitosan surface
  قدرت اله موسوی ممبینی خوشناز پاینده لاله رومیانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  68 - Synthesis and Characterization of Carbon Ceramic Composite Based on Molecularly Imprinted Polymer for Selective Absorption of Cloxacillin Antibiotic from Milk
  Vahid Mahmoudi Saeid Jafari
  10.30495/ijtnbm.2023.1972929.1013
• Open Access Article
  • Abstract Page
  • Full-Text
  
  69 - Vibrations and Damping Analysis of Composite Sandwich Panels with Reinforced Kevlar Fibers
  Abdolhossein Fereidoon Ali Hazrati Niyari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  70 - Design of an Ultra-Wideband Monopole Antenna by Using New Nano-Composite Materials
  yashar zehforoosh parisa Esmailzadeh Kaleybar banafshe Marufi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  71 - Compressive Strength and Ductility of Concrete Wrapped by CFRP
  Seiyed Ali Haj Seiyed Taghia Behzad Saeedi Razavi Hamid Reza Darvishvand
  10.22094/jseg.2021.688676
• Open Access Article
  • Abstract Page
  • Full-Text
  
  72 - Quasi-static Axial Compression of thin-walled Circular Composite Tubes
  Mohammad Mahdi Kheirikhah Sajjad Dehghanpour Mohsen Rahmani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  73 - The effect of fish powder using on wood plastic composite biodegradability
  ali kazemi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  74 - Effect of Silicon Carbide and graphite additives on the pressureless Sintering mechanism and microstructural characteristics of Ultra-High Temperature ZrB2 Ceramics Composites
  Mahdi Khoeini Mohammad Zakeri Ali Nemati Morteza Tamizifar Hamed Samadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  75 - Investigating the effect of tool dimension and rotational speed on microstructure of Al-B4C surface composite layer produced by friction stir processing (FSP)
  Mohammad Narimani Behnam Lotfi Zohreh Sadeghian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  76 - Mechanical Characterization of Hemp Cotton Hybrid Composites: Effect of Surface Treatment
  Hiral Parikh Shrey Patel
• Open Access Article
  • Abstract Page
  • Full-Text
  
  77 - Fabrication of Al7075-MWCNT Composite Powder by Recycling Aluminum Alloy Chips Via High Energy Milling and Alloying
  Parisa Fekri Dolatabad Vahid Pouyafar Ramin Meshkabadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  78 - Delamination Detection in a Laminated Carbon Composite Plate Using Lamb Wave by Lead-Free Piezoceramic Transducers
  Mohamad Hossein ataei Seyed Ali Hassanzadeh-Tabrizi Mahdi Rafiei Ahmad Monshi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  79 - Production of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying
  S Nazari A Saidi A Shafyei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  80 - Improving photocatalytic properties of Zn0.95Ni0.04Co0.01O modified by PANI
  sara poorarjmand Maryam Kargar Razi Ali Mahjoob Morteza khosravi
  10.22034/jna.2019.583514.1131
• Open Access Article
  • Abstract Page
  • Full-Text
  
  81 - Effect of nanoparticles on the improving mechanical behavior of GFRP composites in a corrosive environment
  Yasaman Gitiara Reza Barbaz-Isfahani Saeed Saber-Samandari Mojtaba Sadighi
  10.22034/jna.2021.1930895.1256
• Open Access Article
  • Abstract Page
  • Full-Text
  
  82 - Synthesis, characterization and photocatalytic activity of nanoZnO and Ni-Co-ZnO nanocomposites
  Sara Poorarjmand Maryam Kargar Razi Ali Reza Mahjoub Morteza Khosravi
  10.22034/jna.2018.563722.1080
• Open Access Article
  • Abstract Page
  • Full-Text
  
  83 - Application of TiO2/ZnS as a nano photocatalyst for degradation of Acid Red 18 in aqueous media using a central composite design
  Aref Shokri Mahdi Sanavi Fard
  10.22034/jna.2022.1933982.1261
• Open Access Article
  • Abstract Page
  • Full-Text
  
  84 - Degradation of Chloridazon in an aqueous environment using TiO2/Ag as a synthesized nano photocatalyst using central composite design
  Maysam Abdolkarimi Fariba Soleimani Aref Shokri
  10.22034/jna.2022.1934052.1262
• Open Access Article
  • Abstract Page
  • Full-Text
  
  85 - Photocatalytic degradation of Congo Red dye by using nano ZnO and Ni-Co-ZnO nanocomposites
  Sara Poorarjmand Maryam Kargar Razi Ali Reza Mahjoob Morteza Khosravi
  10.22034/jna.2018.541866
• Open Access Article
  • Abstract Page
  • Full-Text
  
  86 - Improving photocatalytic properties of Zn0.95Ni0.04Co0.01O modified by PANI
  Sara Poorarjmand Maryam Kargar Razi Ali Reza Mahjoub Morteza Khosravi
  10.22034/jna.2019.667136
• Open Access Article
  • Abstract Page
  • Full-Text
  
  87 - Evaluation of SMC Synchronous Motor Using Soft Magnetic ‎Compounds and Direct Fuzzy Torque Control ‎
  Hossein Refahi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  88 - A Numerical Investigation the Effects of the Voltage on the Displacement and Stress of Copper-based Ionic Polymer-Metal Composites
  Hamid Soleimanimehr Amin Nasrollah
• Open Access Article
  • Abstract Page
  • Full-Text
  
  89 - Microstructural and Mechanical Characterization of Friction Stir Processed Aluminum Alloy 6061-T6 Reinforced with Zirconium-Silicate Particles
  Zohrheh Ebrahimi Moslem Sarikhani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  90 - Survey of AZ31/HA-Zeolite Nano Crystalline Biocomposite with Powder Metallurgy (PM)
  Mehrdad Soltani Ebrahim Karamian Majid Karimian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  91 - Experimental Study of Packing Time and Melt Temperature Effects on Shrinkage of a Thin Sheet Made of Wood-HDPE Composite
  Siavash Sobhani Nathan Jafarian Jam
• Open Access Article
  • Abstract Page
  • Full-Text
  
  92 - Improvement and Optimization of Homogeneous Composite in Array Antennas using Convolution Neural Network
  Gohar Varamini Behnam Dorostkar Yaghouti
• Open Access Article
  • Abstract Page
  • Full-Text
  
  93 - Investigating the behavior of reinforced concrete beams with FRCM and TRM composites
  bizhan karimi sharafshadeh
  10.30495/civil.2023.1978889.1335
• Open Access Article
  • Abstract Page
  • Full-Text
  
  94 - Study on Behavior of Infilled Composite Steel Frame under Lateral Loading
  Hasan PoorMohammad seyedali tabatabayi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  95 - Numerical Investigation of the Behavior of Concrete beam Reinforced with FRCM and TRM Composites
  bizhan karimi sharafshadeh Mohammad Amiri mohammad javad ketabdari Farhood Azarsina
  10.30495/civil.2023.706895
• Open Access Article
  • Abstract Page
  • Full-Text
  
  96 - Investigating the Behavior of Composite Shear Walls with CFRF Reinforcement Based on Nonlinear Behavior of Concrete
  mansour hemmatian mohammadreza shekari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  97 - Optimization of the Orang Pigment Production by monascus purpureus from Date Waste Using Response Surface Methodology
  Fatemeh Bakhshi Mahshid Jahadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  98 - Trifluoroacetate-bonded polyethylene graphene oxide composite as a novel and efficient catalyst for the synthesis of benzimidazoles under solvent-free conditions
  Esmael Rostami Seyed Mahdi Haghayeghi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  99 - Optimization of Photo Catalytic Activity of ZnO Nano Composites by Surface Modification with Cu metal using Facile Hydrothermal Approach
  Fazal Ur Rehman Manzar Zahra Iqra Qayyum Aoun Raza Amir Waseem
  10.30495/ijc.2022.688325
• Open Access Article
  • Abstract Page
  • Full-Text
  
  100 - Sulfonated polystyrene/montmorillonite nanocomposite as a new and efficient catalyst for the solvent-free Mannich reaction
  Ahmad Reza Massah Roozbeh Kalbasi Mitra Toghyani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  101 - Archaeological Survey of Islamic Sites in the Central Part of Shazand
  Fatemeh Mahdikhani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  102 - Numerical study of the progressive failure of high-rise steel construction with composite roof system under blast load effect
  Alireza Faroughi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  103 - Implementation of Higher Order Shear Theory on Isotropic Material and Liu's Bending Part on Laminated Composite Flat Shell Elements
  Taufiq Rochman Agoes Soehadjono Achfas Zacoeb
• Open Access Article
  • Abstract Page
  • Full-Text
  
  104 - Effect of quartz filler with fluoride-containing barium aluminosilicate on the mechanical properties of light-cured dental composites based on Bis-GMA/UDMA/TEGDMA
  babak akbari Sahar Vahedi Maryam Jamshidi Farhood Najafi
  10.30495/jacr.2022.1946038.1992
• Open Access Article
  • Abstract Page
  • Full-Text
  
  105 - Preparation, characterization, and investigation of antibacterial activity of ‎polyacrylonitrile/silver metal-organic framework/chitosan nanoparticles/N-acetylcystine ‎multi-component fibrous composites
  Zeinab Ansari-Asl Hadis Rashidi-Kia Esmaeil Darabpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  106 - Ultrasound-assisted liquid-liquid microextraction based on a deep eutectic solvent for extraction carvedilol from plasma samples before determination by spectrofluorimetry method
  Hassan Heidari Zeynab Esmaeilzadeh Kazem Jamshidi Ghaleh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  107 - Synthesis, characterization and study of Pt/A type-HMS micro/mesoporous catalysts in the normal heptane reforming process
  Nastaran Parsafard
• Open Access Article
  • Abstract Page
  • Full-Text
  
  108 - خصوصیات ریزساختار و خصوصیات مکانیکی کامپوزیت های Al-SiCp
  G. Hemath Kumar M. Sreenivasan S. Muthu Kumar N. Dilip Raja
• Open Access Article
  • Abstract Page
  • Full-Text
  
  109 - کاربرد روش پالس برای اندازه گیری برش افزایشی تنش های باقیمانده در کامپوزیت های چند لایه
  محمود مهرداد شکریه سعید اکبری
• Open Access Article
  • Abstract Page
  • Full-Text
  
  110 - محاسبه غلظت تنش در اطراف یک سوراخ در یک لایه ترکیبی ترکیبی با استفاده از روش المان محدود
  پژمان تقی پور پدرام لورزاده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  111 - رسانش گرما در مخازن کامپوزیتی کروی
  م. نوروزی ا. امیری دلویی م. سلیسپور
• Open Access Article
  • Abstract Page
  • Full-Text
  
  112 - رفتار خزش کامپوزیت های اپوکسی تقویت شده بازالت و الیاف شیشه
  رضا اسلامی فارسانی سید محمدرضا خلیلی وحید دقیقی رضا فاضلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  113 - مقایسه خصوصیات فشاری بین روش Va-cuum Infusion و روش Hand Lay-Up برای ساندویچ پانل کامپوزیتی با هسته Bal-sa
  م. نجفی ر. اسلامی فارسانی سید محمدرضا خلیلی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  114 - ارتعاش آزاد صفحات کامپوزیت مستطیلی با تکیه گاه ساده با Patch Mass
  ر. اکبری آلاشتی ر. علی بخشی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  115 - Active Packaging Film Based on Lysozyme/Polyvinyl Alcohol / Alyssum Homalocarpum Seeds Gum
  Anna Abdolshahi Leila Monjazeb Marvdashti Bahare Salehi Filippo Maggi Javad Sharifi-Rad
  10.22034/jchr.2020.1890915.1091
• Open Access Article
  • Abstract Page
  • Full-Text
  
  116 - Effect of silver nanoparticles on the crystallinity of polyethylene
  مریم ابارشی سکینه مسگر شاهرودی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  117 - Evaluation of the Pitting Corrosion Behavior of Al-nano Zro2 composite Produced by Accumulative Roll Bonding (ARB) Process
  سینا متین محمود پاکشیر
• Open Access Article
  • Abstract Page
  • Full-Text
  
  118 - Characterization of Cu-Yttria Stabilized Zirconia composite produced by Spark Plasma Sintering
  جعفر میرعظیمی پروین عباچی کاظم پورآذرنگ وحید بابایی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  119 - Fabrication of in situ Al-Ni surface composite on 2024 aluminum alloy by friction stir processing
  ابراهیم بهرامی مرتضی شمعانیان حسین ادریس
• Open Access Article
  • Abstract Page
  • Full-Text
  
  120 - Electrophoretic deposition of SiC nanoparticles
  علی گلشنی عجب شیر حسین آقاجانی محمد جعفرپور سهند بهرنگی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  121 - Synthesis of ZnWO4 nanoparticles and manufacturing scintillator for detecting Gama- rays
  رسول صراف ماموری آرزو عبدالرحمانی خیراله محمدی محسن روشن
• Open Access Article
  • Abstract Page
  • Full-Text
  
  122 - The Effect of Electrical Discharge Machining Parameters On 2024 Aluminum-Based Composite Material Using Calculation and Analysis of the Total Normalized Quality Loss and Signal-to-Noise Analysis
  Behnam Masoudi saeed daneshmand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  123 - Synthesis and Characterization of SrFe12O19/SiO2/TiO2 Composite Powder with Core/Shell/Shell Nanostructure
  fatemeh bavarsiha Mehdi Montazeri-Pour Masoud Rajabi samira Gholami Naeimeh Mozaffari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  124 - Evaluation of the thermal properties of PLLA/HA and PLLA/45S5 composites for application in bioabsorbable interference screws
  mohammad khorsand-ghayeni علیرضا صادقی اول شهر سمیرا نوخاسته امیر مهدی مولوی حسین امینی مشهدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  125 - The effect of niobium oxide (Nb2O5 ) on the sintering behavior of composite Al2O3-ZrO2
  حسین خوارزمی پور khalil ranjbar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  126 - Investigation on microstructure, mechanical properties and pressureless sintering behavior of ZrB2-SiCnano/micron composites
  زینب نصیری مهری مشهدی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  127 - Electrical Discharge Machining of Aluminum Matrix Composite Reinforced With Titanium Oxide Nano-Particles
  Ali akbar lotfi Saeed Daneshmand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  128 - Investigating the effect of nickel particle size and green density on the properties of NiAl-TiB2-TiC composite produced by combustion synthesis
  Mandana Adeli Rasoul Abdollahpour Mansour Soltanieh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  129 - Fabrication of Ni-VC Nano composite powder from oxide reactants by mechanochemical method
  Seyed Amir Hossein Emami Seyed Kamal Hosseini Danial Davoodi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  130 - Effect of nanograghite addition on the densification of ZrB2-SiC composites fabricated by spark plasma sintering
  Soroush Parvizi Zohre Ahmadi Mehdi Shahedi Asl Mehran Jaberi Zamharir
• Open Access Article
  • Abstract Page
  • Full-Text
  
  131 - On the use of Response Surface Methodology for Optimization of Scaffold Composite of the Hydroxyapatite and Diopside
  Nasrin Rafiee Saeid Karbasi amirabas nourbakhsh kamran amini
  10.30495/apme.2021.1889820.1973
• Open Access Article
  • Abstract Page
  • Full-Text
  
  132 - Preparation of Magnetic Nano Composite Modified with Orange Peel for Adsorption of Vitamin B5 from Aqueous Solution
  Seyyedeh Ghazaleh Hashemipour Zavareh Fariba Tadayon Ruhollah Karami Osboo
• Open Access Article
  • Abstract Page
  • Full-Text
  
  133 - The Investigation of the Corrosion Resistance of Al/Alumina Composites Fabricated Via ARB Process
  Ali Jahangiri Sadri Mohammad Heydari Vini Saeed Daneshmand
• Open Access Article
  • Abstract Page
  • Full-Text
  
  134 - TLP Bonding of Al-Al3V Nano Composite and Evaluation of its Properties
  Seyedeh Zahra Anvari Mahdi Rajabi Safora Oshaghi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  135 - Optimization of Effective Parameters in the Stir Friction Extrusion Process on Porosity and Tensile Strength of SiC Ceramic Particles Reinforced AA1050 Aluminum Matrix Composite
  Mojtaba Soleimanipour Reza Abedinzadeh Seyyed Ali Eftekhari Ali Heidari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  136 - The effect of pressure on the Mg alloy-Alumina composite properties fabricated by infiltration casting
  Bahman Eghtedari Mahmoud Meratian Ali Maleki Mohamad Khodaei
• Open Access Article
  • Abstract Page
  • Full-Text
  
  137 - Investigation on effect of different parameter on deposition kinetic of SiC coating applied by chemical vapor deposition (CVD) method on carbon-carbon composite
  Naser Hoseini Hosein Aghajani
• Open Access Article
  • Abstract Page
  • Full-Text
  
  138 - The Effects of Adding Multi-Walled Carbon Nanotubes (MWCNT) on the Mechanical Properties and Biocompatibility of The Ultra-High Molecular Weight Polyethylene Polymer Matrix (UHMWPE) in Joint Replacements
  Mohsen Fakoori Mohammad Taghi khorassani Mehdi kamali dolat abadi
  10.22034/ascij.2022.1974726.1446
• Open Access Article
  • Abstract Page
  • Full-Text
  
  139 - ساخت نانوکامپوزیت پایه تیتانیوم متراکم شده به روش استاتیکی در فشار های های تراکم گوناگون و بررسی خواص مکانیکی آن
  سید مهران زحلی فرزاد فریبا
• Open Access Article
  • Abstract Page
  • Full-Text
  
  140 - ساخت و مشخصه یابی ایمپلنت های نانوکامپوزیتی منیزیمی AZ31/HA-Zeolite به روش آلیاژ سازی مکانیکی و متالورژی پودر
  حسن قیصری ابراهیم کرمیان محمد براتی سده
• Open Access Article
  • Abstract Page
  • Full-Text
  
  141 - بررسی تأثیر استراتژیهای فرزکاری در ماشینکاری سطوح محدب از جنس کامپوزیت شیشه/اپوکسی
  هادی محمدی هادی اسکندری ایمان دانایی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  142 - Using finite element model in calculation of stress concentration factor around an elliptical hole in composite hybrid lamina
  Pedram Lorzadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  143 - A numerical simulation of accumulative press bonding process of laminated MMCs
  Vahid Nayeri Saeed Daneshmand Mohammad Heydari Vini Mohammad Yazdaniyan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  144 - Simulation of chromium, nickel and lead removal from aqueous environment using polypyrrol and its composites
  Arash Shabani Majid Riahi Samani Davood Toghraie
• Open Access Article
  • Abstract Page
  • Full-Text
  
  145 - تحلیل ارتعاشات آزاد تیر تیموشنکو تقویت‌شده با نانولوله‌های نیترید‌بور بر روی بستر ارتجاعی
  ایلدا عبداللهی محمدحسین یاس
• Open Access Article
  • Abstract Page
  • Full-Text
  
  146 - بررسی اثر کسر حجمی فاز تقویت‎کننده بر خواص کششی کامپوزیت Al6061/SiC به روش اکستروژن گرم
  محمد رضا ستاری محمد رنجبران
• Open Access Article
  • Abstract Page
  • Full-Text
  
  147 - بررسی پارامترهای مؤثر در تعیین تنش های پسماند در صفحات فلزی و چندلایه‌های کامپوزیتی با روش شیارزنی
  محمود مهرداد شکریه سعید اکبری رکن‌آبادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  148 - بررسی حساسیت روش های عیب یابی بر پایه شکل مود به شدت آسیب
  علی حسن زاده جعفر اسکندری جم سعید شکرالهی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  149 - تحلیل غیرخطی رفتار ترمومکانیکی مواد مرکب فعال شده بوسیله الیاف آلیاژ حافظه دار
  سیامک مقبلی محمدجواد محمودی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  150 - تحلیل ارتعاشات غیرخطی ورق کامپوزیتی با الیاف حافظه دار با در نظر گرفتن تغییرات لحظه ای کسر حجمی فاز مارتنزیت
  محمد شرعیات سارا سمایی مجتبی مرادی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  151 - بررسی تجربی مکانیک شکست در مواد مرکب زمینه آلومینیومی حاوی پانزده درصد ذرات کاربید سیلیسیم
  محمد رنجبران محمد تقی نجفی مهدی اعطائی رسول امینی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  152 - Investigating the mechanical properties of the composite made of polypropylene and Conocarpus wood flour
  Amir Mohammadinia parizad sheikhi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  153 - Synthesis of SiO2 Nano particles-Dimethyl Malonate Polymer
  banafsheh gorji allahgholi ghasri allahgholi ghasri
• Open Access Article
  • Abstract Page
  • Full-Text
  
  154 - The effect of B4C particle contents on hardness and wear resistance of Al-SiC-B4C composite formatted on AA332 via GTAW process
  میلاد Amini حامد Sabet بنفشه Karbakhsh ravari
• Open Access Article
  • Abstract Page
  • Full-Text
  
  155 - Fabrication of AZ91D/SiC Magnesium Matrix Composite with High Particle Reinforcement Loading, Produced by Mechanical Milling of Chips and Semi-Solid Powder Processing
  Somayeh Nikmardan Vahid Pouyafar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  156 - Effect of TiC and TiB2 Reinforcement Phase Addition on Mechanical and Tribological Properties of NiAl-TiC-TiB2 Composite Produced Through Combustion Synthesis Process
  Fatemeh Soleimani Mandana Adeli Mansour Soltanieh Hassan Saghafian
  10.30495/jnm.2021.28334.1924
• Open Access Article
  • Abstract Page
  • Full-Text
  
  157 - synthesis and characterization of Al-Al3Ti in-situ composite produced by fsp using reactive mechanically alloyed powder
  Behnam Lotfi pooriya poorchini Zohreh Sadeghian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  158 - Mechanical and Corrosion Properties of Graphene Oxide-Copper Nano-composites produced by the accumulative Roll Bonding (ARB) method
  Laleh Ghalandari Parisa Tajbakhsh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  159 - Fabrication of Cu-Al2O3 composite tubes through electroforming process and investigation on the effect of alumina particles on corrosion resistance of the tubes
  Mohammad Hossein Paydar Mohammadreza Nooryan
• Open Access Article
  • Abstract Page
  • Full-Text
  
  160 - The role of Ex-situ 0.5wt.% B4C reinforcement and later formed In–situ TiC and TiBw on microstructural evolution of Ti-10Mo mixed powder alloy
  Marjan Ranjbari Maziyar Azadbeh Abbas Sabahi Namini
  10.30495/jnm.2023.32053.2003
• Open Access Article
  • Abstract Page
  • Full-Text
  
  161 - An Investigation on the Effect of Barium Titanate Nanoparticles on the Properties of Electrospun PVDF Fibers
  Neda Askarzadeh Zahra Sherafat
  10.30495/jnm.2022.30838.1970
• Open Access Article
  • Abstract Page
  • Full-Text
  
  162 - A detailed DOE study on temperature, concentration and their interactions on corrosion protection of carbon steel
  Sirus Javadpour Mohammad Ebrahim Bahrololoom Morteza Roodaki
  10.30495/jnm.2022.29506.1946
• Open Access Article
  • Abstract Page
  • Full-Text
  
  163 - Electrochemical deposition of calcium phosphate coating on the Ti-10Mo-X (TiC & TiB2) composite produced by spark plasma sintering
  Zahra Naghdi Chavan Mazyiar Azadbeh Mohammad Reza Etminanfar Leila Fathyunes
  10.30495/jnm.2023.30608.1961
• Open Access Article
  • Abstract Page
  • Full-Text
  
  164 - Production of Aluminum metal matrix composite reinforced with Al-Cr-Fe quasicrystal nano-powder by using accumulative roll bonding process and investigation mechanical properties
  Shima Pashangeh Morteza Alizadeh Rasool Amini
  10.30495/jnm.2021.28185.1922
• Open Access Article
  • Abstract Page
  • Full-Text
  
  165 - The effect of carbon nanotube surface modification on conductivity behavior of carbon nanotube reinforced polythene matrix hybrid HDPE composite with segregate structure
  Atiyeh Neyshabouri Mohammadabdi Samaneh Sahebian Saghi Mohsen Haddad Sabzevar Jalil Vahdati Khaki
  10.30495/jnm.2023.31801.1993
• Open Access Article
  • Abstract Page
  • Full-Text
  
  166 - Mo diffusion and In-situ formation of reinforcement in spark plasma sintering of powder mixed Ti-10Mo-1.5B4C composite at different temperatures and holding time
  Marjan Ranjbari Maziyar Azadbeh Abbas Sabahi Namini
  10.30495/jnm.2023.32589.2014
• Open Access Article
  • Abstract Page
  • Full-Text
  
  167 - Effect of Milling Speed on Fabrication Al2O3-ZrB2 in Situ Nano-Composite Powder Via Mechanochemical Synthesis
  L. دریس SH. SH
• Open Access Article
  • Abstract Page
  • Full-Text
  
  168 - Flexural Properties of Epoxy Matrix Composites Reinforced by Milled Fibers
  S. Karimi S. Javadpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  169 - Investigating the Tribological Behavior of Epoxy Matrix Composites Reinforced by Milled Fibers
  S. Karimi S. Javadpour
• Open Access Article
  • Abstract Page
  • Full-Text
  
  170 - In-situ fabrication of titanium metal powder incorporated AA3003 /Al3Ti alloy composite by friction stir processing
  M. Zadali M. kotiani K. Ranjbar
• Open Access Article
  • Abstract Page
  • Full-Text
  
  171 - Effect of Addition (MoSi2) on the Resistivity and Mechanical Properties of Cu/MoSi2 Composite Produced by Accumulative Rroll Bonding (ARB) Process
  A.H. Eslami M.M. Moshksar S.M. Zebarjad
• Open Access Article
  • Abstract Page
  • Full-Text
  
  172 - Feasibilty Study of AZ31/Al2O3 Surface Nanocomposite Fabrication Via Friction Stir Processing
  مهدی Azizieh مهدی Boroujerdnia
• Open Access Article
  • Abstract Page
  • Full-Text
  
  173 - Thermodynamic Analysis of Pressureless Sintering of B4C-Si Nano Composite by Factsage Software
  M. سعیدی حیدری H. بهاروندی N. احسانی
• Open Access Article
  • Abstract Page
  • Full-Text
  
  174 - Preparation of Super-High Strength Bimodal Aluminum Based Nanocomposite Via Mechanical Alloying and Hot Extrusion
  A. Abdollahi A. Alizadeh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  175 - Wear Properties of Al-Gr Composites Produced Using Liquid Homogenization Followed by Cold Press-Sintering
  H. Pakdell Noghabi A. Babakhani S. A. Sajjadi
• Open Access Article
  • Abstract Page
  • Full-Text
  
  176 - Investigation of microstructure and hardness of surface composite AA5086(H116)/ZrO2 and surface hybrid composite AA5086(H116)/ZrO2/Gr fabricated by friction stir processing
  H. Masroor K. Janghorban H. Danesh Manesh
• Open Access Article
  • Abstract Page
  • Full-Text
  
  177 - Microstructure, Hardness and Wear Resistance of the Hard Layer Containing Silicon Carbide Particles on ASTM A106 Steel Produced by GTAW Welding
  H. Mazaheri A.R. Alaei M. fazel
• Open Access Article
  • Abstract Page
  • Full-Text
  
  178 - Statistical Micromechanical Analysis of the Effects of Fiber Random Distribution on the Mechanical Properties of Fibrous Composites
  M. J. Mahmoodi M. K. Hassanzadeh Aghdam
• Open Access Article
  • Abstract Page
  • Full-Text
  
  179 - The Effect of Milling Time and Sintering Temperature on the Microstructure and Mechanical Properties of Al/20% SiC Composite Prepared by Powder Metallurgy
  نفیسه Talavari Kh Gheisari محسن ریحانیان Reihanian
• Open Access Article
  • Abstract Page
  • Full-Text
  
  180 - A Comparative Study of Insulators on Magnetic Properties of Sendust Based Nanocomposite Powder Cores
  Maryam Amoohadi Morteza Mozaffari Abdolrasoul Gharaati Mohammad Rezazadeh